Miele K 8952 Operating And Installation Instructions
Here you can view all the pages of manual Miele K 8952 Operating And Installation Instructions. The Miele manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.
Page 31
The appliance is supplied right-hand hinged. If left-hand door hinging is required, follow the instructions below. Removing the door handle: First the side section of the handle must be removed: ^Pull door handleatowards you. Side sectionbslides back, creating a gapdbetween side sectionband mounting platec. ^ Place a suitable object (e.g. a spoon handle) in gapd, and slowly lever the handle towards the door. Be careful not to let the spoon handle slip, causing damage to the appliance. The side...
Page 32
^Open the door, tilt it downwards and take it off. ^Remove coverf, and unscrew hinge bracketg. ^Fit hinge pinhin the second hole of hinge bracketg. ^Refit bracketiand coverjturned through 180° on the opposite side. ^ Screw hinge bracketginto the opposite side. TheM4 screwhas to be screwed into the left hole of the hinge bracket. ^ Turn coverfthrough 180°, and fit it on the other side. ^ Remove spacerkwith a screwdriver and refit it on the opposite side. ^ Remove pluglfrom the door bearing bush in the...
Page 33
^Align the door with the appliance housing using the long slot in hinge platef. Then tighten screwc. ^Refit plinth fasciad, pushing it firmly into position. ^With the door open, position covere in the front of the plinth facing, and push it firmly into position. Refitting the handle: Please make sure you follow the instructions below carefully when you refit the handle. The door seal will be damaged if the handle is fitted incorrectly. ^ Loosely attach the handle to the opposite side of the door with the...
Page 34
600 mm wide appliancescan be installed into a kitchen run. To match the height of the rest of the kitchen, the appliance can be fitted with a suitable top boxa. A ventilation gap of at least 50 mm depth must be allowed for behind the appliance and top box, if fitted, for air to circulate. A gap of at least 40 mm is required between the top of the appliance (or top box) and the ceiling to ensure that air can circulate without hindrance. Otherwise the appliance has to work harder, resulting in an increase...
Page 35
35
Page 36
Alteration rights reserved / 4705 K 8952 SD ed-1M.-Nr. 06 777 840 / 00 en-GB