Midway Cruis N Exotica Conversion Kit Installation Manual

&UXLV·Q ([RWLFDŒ
9
&+$37(5,167$//$7,21
The REMOTE MONITOR ADJUSTMENTS
 are located inside coin vault. Adjust video image size, bright-
ness, contrast, etc., using the Monitor Test screens and the monitor controls. 
The SLAM TILT SWITCH
 detects forceful vibrations against coin door to eliminate pounding for free
games. It is located on the inside of the coin door opening near the lock.
NOTE
: The Slam switch is not present on Dollar Bill Validator (DBV) ready doors.
TYPICAL COIN DOOR SWITCH LOCATION...

100LGZD\ $PXVHPHQW *DPHV //&
&+$37(5,167$//$7,21
CPU BOARD ASSEMBLY A-22536-2
Designation Part Number Function Description
U47 5460-15676-00 Config Memory Backup 3V Lithium Battery
F1, F2 5735-13853-00 Circuit Protection 2A SB Fuse 5x20mm
U2 A-5343-40072-11 Sound EPROM Assembly
U3 5341-16431-14 Sound EPROM Assembly
U4 5341-16431-15 Sound EPROM Assembly
U10 A-5343-40072-1 Programming & Images EPROM Assembly
U11 A-5343-40072-2 Programming & Images EPROM Assembly
U12 A-5343-40072-12 Programming & Images...

	

&UXLV·Q ([RWLFDŒ
 
™


	
	


	 

20,:$

&58,6·1(;27,&$Œ
3
&+$37(5,$*1267,&6
DIAGNOSTIC MENU
To verify the condition of the electrical and electronic hardware in the game, select Diagnostics Menu at 
the Main Menu. Diagnostic tests assist you in checking and adjusting the game’s major systems. It is 
important to periodically run diagnostics to improve and maintain game performance and player satisfac-
tion. 
Use the Volume Up or Volume Down button to highlight the desired Diagnostic Menu option and press the
Test button to enter. 
SWITCH...

40,:$

&58,6·1(;27,&$Œ
5
&+$37(5,$*1267,&6
DIP SWITCH TEST
To verify the functionality of both 8-position DIP switches on the CPU Board, select DIP SWITCH TEST at 
the Main Menu. Observe immediate on-screen results by changing the setting on a switch.
Use the Volume Up or Volume Down button to highlight the DIP Switch Test option and press the Test but-
ton to access it. The current settings appear on-screen. Consult the table on the next page to determine if 
changes are required. The default switch positions...

60,:$

&58,6·1(;27,&$Œ
7
&+$37(5,$*1267,&6
The linking feature will function for all other VGMs if one of the slaves is not turned on and in normal
game play mode. If any slave is turned off, disconnected from the linking cable, or in any other mode of
operation (offline, diagnostics, etc.), the linking ability of other slaves will not be affected. 
The linking feature will function for some VGMs, and not others, if all of the link activity switches are
not enabled or the software version numbers are not the...

80,:$