Midland Sp-400 Series Transceiver Users Guide
Here you can view all the pages of manual Midland Sp-400 Series Transceiver Users Guide. The Midland manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 1
User’s Guide SP-400 Series Portable 4/16 Channel VHF-FM Portable Transceiver 4/16 Channel UHF-FM Portable Transceiver www.midlandradio.com
Page 2
SP-400 Series User’s Guide 2 © 2005, Midland Radio Corporation FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE ONLY The Federal Communications Commission (FCC), within its action in General Docket 93-62, November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated equipment. Midland Radio Corporation subscribes to the same safety standard for the use of its products. Proper operation of this radio will...
Page 3
SP-400 Series User’s Guide Contents Conventions and Symbols in this Book...................................4 Disclaimer........................................................................\ ........5 Safety........................................................................\ ...............5 Introduction........................................................................\ ......7 Radio models.......................................................................7 Radio...
Page 4
SP-400 Series User’s Guide Sending a 2-tone/selective call or emergency call.............20 Scanning channels.............................................................21 Advanced Operations............................................................24 Operating hands-free.........................................................24 Using the scrambler...........................................................25 Editing your scan list..........................................................25...
Page 5
SP-400 Series User’s Guide Disclaimer Midland Radio Corporation is committed to continuous quality improvements, for this reason specifications may change without prior notice. Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Midland assumes no responsibility for the results of errors beyond its control. The manufacturer of this equipment also cannot guarantee that changes in the equipment made by unauthorized people will not...
Page 6
SP-400 Series User’s Guide Do not operate the radio near unshielded electrical blasting caps or in an explosive atmosphere. Do not transmit without the antenna attached to the radio. Though designed for protection against damage, damage to the transmitter may occur. Respect the environmental conditions. The radio is designed to operate in harsh environments, but avoiding extended or unnecessary exposure will prolong the service life. Never attempt to disassemble or service the radio...
Page 7
SP-400 Series User’s Guide Introduction Congratulations! By choosing the Midland SP-400 series, you have selected a professional grade portable radio. Its rugged design will provide years of reliable service and its sophisticated software allows many customizable options. Radio models There are four models in the SP-400 series portable radio line. The models differ only by band of operation and channel capacity. SP-410 – 4 channel VHF, 148-174 MHz. SP-420 – 4 channel UHF, 440-470 MHz....
Page 8
SP-400 Series User’s Guide 47 CTCSS tones and 104 DCS codes programmable per channel. 5 2-tone decode – your radio may be programmed to respond only when paged with a two-tone sequence. Two sequences selectable per channel and up to 15 different sequences programmable per radio. 5 VOX (voice operated transmit) – allows hands-free operation using an optional headset/microphone. 5 Voice inversion scrambler – for secure communications. Radio communications are encoded and decoded, when...
Page 9
SP-400 Series User’s Guide Radio Controls Please read this section to familiarize yourself with the transceiver’s controls. 2 3 1 7 4 68 5 9 © 2005, Midland Radio Corporation 9
Page 10
SP-400 Series User’s Guide Top [1] Channel selector knob. Rotate this knob to select the operating channel. [2] Power ON/OFF knob. Rotate this knob clockwise to turn the transceiver on (counterclockwise to turn off). [3] Status LED. Tri-color LED lights and flashes at different rates to indicate operating conditions. Front [4] Speaker. Receive audio will be heard from the built in speaker located in this area. [5] Microphone. The internal microphone is located here. Side (right) [6]...