Home
>
Midland
>
Communications receiver
>
Midland Gxt300/325/310/400/450 Gmrs/frs Radio Owners Manual
Midland Gxt300/325/310/400/450 Gmrs/frs Radio Owners Manual
Here you can view all the pages of manual Midland Gxt300/325/310/400/450 Gmrs/frs Radio Owners Manual. The Midland manuals for Communications receiver are available online for free. You can easily download all the documents as PDF.
Page 2
®Model GXT300/325/310/400/450 Series Page 2www.midlandradio.com TABLE OF CONTENTS2 Introduction3 Important Notice, FCC Licensing4 LCD Display5 Controls5 Battery Installation6 Installing the Belt Clip6 Charging the Optional Battery Pack7 Low Battery Level Indicator7 Operating Your Radio8 - 13 External Speaker/Microphone Jack14 Troubleshooting Guide15 Use and Care15 Specifications and Frequency Charts16 Warranty Information17 MIDLAND Family Products18 Accessories18 Accessories Order Form19
Page 3
® Page 3www.midlandradio.com Welcome to the world of Midland electronics Congratulations on your purchase of a high quality MIDLAND product. Your 2-way radio represents the state-of-the-art in high-tech engineering. Designed for GMRS (General Mobile Radio Service) operation, this compact package is big in performance. It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your...
Page 4
® Page 4www.midlandradio.com IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION The GXT300/325/310/400/450 Series operates on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. You must be licensed prior to operating on channels 1 - 7 or 15 - 22, which comprise the GMRS channels of the GXT300/325/310/400/450 Series. Serious penalties could result for unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in the...
Page 5
® Page 5www.midlandradio.com CONTROLS LCD DISPLAY1. LOW BATTERY ICON– Indicates the battery level is low. 2. TRANSMIT (TX) ICON– Indicates radio is transmitting a signal. 3. eVOX– Indicates when eVOX mode is active. 4. CHANNEL NUMBER– Changes from 1~22 on GMRS/FRS band (1~10 on WX band GXT310/400/450 Series only). 5. RECEIVE (RX) ICON– Indicates radio is receiving a transmission. 6. KEY LOCK ICON – Indicates KEY LOCK mode is on. 7. WX BAND ICON– Indicates when the radio is in Weather Band mode...
Page 6
® Page 6www.midlandradio.com BATTERY INSTALLATION Your GXT300/325/310/400/450 Series radio operates with either 4 AA alkaline batteries or an optional NiMH battery pack. The belt clip should be removed (see below) to ease installation or removal of the batteries. To install the batteries: 1. With the back of the radio facing you, remove the belt clip (see diagram below) for easy access, then remove the Battery Cover by pressing down on the top center and sliding it down from the radio. 2. Insert 4...
Page 7
® Page 7www.midlandradio.com CHARGING THE OPTIONAL BATTERY PACK Your GXT300/325/310/400/450 Series is equipped for using an optional rechargeable NiMH battery pack (not included) which can be recharged using a desktop charger (not included). Initial charge time is 24 hours with a charge time of 12 hours thereafter. For maximum battery life, we recommend charging the battery pack when the low battery icon comes on. Remove the radios from the charger when the charge time expires. To charge using a...
Page 8
POWER ON/OFF AND VOLUME Rotate the POWER/VOLUMEknob clockwise to turn the radio on and increase the volume level. Rotate the control counter-clockwise to reduce the volume level and to turn the radio off. During Power On, the radio will beep 3 times with different tones, the LCD will display a “self-test” message for 1 second and the LCD display will indicate the last channel selected. TRANSMITTING AND RECEIVING A CALL To communicate, all radios in your group must be set to the same channel and...
Page 9
® Page 9www.midlandradio.com GXT300/325 SERIES QUICK REFERENCE CHART GXT310/400/450 SERIES QUICK REFERENCE CHART MONITOR Pressing and holding the MONITORbutton for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting. Press and hold the MONITORbutton for 1 second again to get out of MONITOR mode. SCAN Your GXT300/325/310/400/450 Series can scan all 22...
Page 10
® Page 10www.midlandradio.com CALL TONE Your GXT300/325/310/400/450 Series can transmit a call tone for a fixed length of time. To send a call tone, press the CALLbutton. The TXicon will appear while transmitting a call tone and a tone can be heard on the speaker for confirmation. KEYPAD LOCK To avoid accidentally changing the radio setting, press the LOCK button for 4 seconds. The KEY LOCKicon will appear on the display. PTTand CALLwill still be active. Repeat the same procedure to unlock the...