Midland 77-255og Transceiver Owners Manual
Have a look at the manual Midland 77-255og Transceiver Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 36 Midland manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11
LIMITED WARRANTY.
Midland Consumer Radio will repair or replace, at its option without charge, any Midland Mobile,
Base Station, or full power Hand-Held Citizens Band transceiver which fails due to a defect in
material or workmanship within one year following the initial consumer purchase.
This warranty does not include any carrying cases, earphones, or telescoping antennas which
may be a part of or included with the warranted product, or the cost of labor for removal or re-
installation of the product in a vehicle or other mounting.
Performance of any obligation under this warranty may be obtained by returning the warranted
product, freight prepaid, along with proof of purchase date, to Midland Consumer Radio,
Warranty Service Department 1670 North Topping, Kansas City, Missouri 64120, or to any “
Midland Authorized Warranty Service Station,” or to the place of purchase ( if a participating
dealer).
Warranty information and the location of the nearest “Midland Authorized Warranty Service
Station,” may be obtained by writing Midland Consumer Radio, Warranty Service Department.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Note: The above warranty applies only to merchandise purchased in the United States of
America or any of the territories or possessions or from U.S. military exchange. For warranty
coverage on merchandise purchased elsewhere, consult the supplemental warranty information
included with this product or ask your dealer.
SERVICE
If it ever becomes necessary to return your unit for service:
Pack the unit in its original box and packing, Improper packing may result in damage during
shipment. Include $7.50 for return postage and handling. (Note: Some states do not require you
to pay for postage and handling).
Include a full description of any problems. Include your telephone number.
You do not need to return accessory items (brackets, screws, power cord, antenna, etc.) unless
they may be directly related to the problem.
Include a photocopy of the bill of sale or other proof of purchase showing the date of sale. This
information must be included before warranty service can be considered.
A flat rate of $45.00 will apply to repairs not covered by warranty. Send only cashiers check,
money order or Master Card or Visa card number.
MIDLAND CONSUMER RADIO
1670 N. Topping
Kansas City, Mo. 64120
Phone 816-241-8500. Fax 816-241-5713
E-mail: [email protected] Printed in China
12 FCC Compliance Information Midland Citizens Band Transceiver Model 77-255ESP This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received including interference that may cause undesired operation. For compliance information contact: Midland Consumer Radio 1670 N. Topping Kansas City, MO 64120 Tel: (816) 241-8500
ENGLISH 13asseMblInG anD PRePaRInG Installing the Wall Mount Plate This monitor meets the specifications for the wall mount plate or other compatible devices. 1 Place the screen face down. To protect the screen from scratches, cover the surface with a soft cloth. 2 Using a screwdriver, remove the 2 screws and detach the stand from the monitor. 3 Place the wall mount plate onto the monitor and align it with the screw holes. 4 Tighten the four screws to fix the plate to the monitor using a screwdriver. Wall mount plate yThe wall mount plate is sold separately. yFor more information on installation, refer to the wall mount plate's installation guide. yBe careful not to apply too much force while mounting the wall mount plate as it may cause damage to the screen. noTe
ENGLISH 14asseMblInG anD PRePaRInG Installing on the Wall Install the monitor at least 10 cm away from the wall and leave about 10 cm of space at each side of the monitor to ensure sufficient ventilation. De- tailed installation instructions can be obtained from your local retail store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket. 10 cm 10 cm 10 cm 10 cm To install the monitor to a wall, attach a wall mount- ing bracket (optional) to the back of the monitor. Make sure that the wall mounting bracket is se- curely fixed to the monitor and to the wall. 1 If you use screws longer than the standard length, it may damage the inside of the prod- uct. 2 A non-VESA standard screw may damage the product and cause the monitor to fall. LG Elec- tronics is not liable for any accidents relating to the use of non-standard screws. Wall Mount (a x b)100 x 100 stand screwM4 x 10 mm Required screws4 Wall Mount Plate(optional)RW120 yWall Mount (A x B) AB y Use the screws specified by VESA standards. y The wall mount kit includes the installation guide and all necessary parts. y The wall mounting bracket is optional. You can obtain optional accessories from your local dealer. y The length of the screw may differ for each wall mounting bracket. Be sure to use the proper length. y For more information, please refer to the user manual for the wall mounting bracket. noTe
ENGLISH 15asseMblInG anD PRePaRInG yUnplug the power cord before moving or install- ing the monitor to avoid electric shock. yInstalling the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead to injury. Use an authorized LG wall mount and contact the local dealer or quali- fied personnel. yApplying excessive force when tightening screws may cause damage to the monitor. Dam- age caused in this way will not be covered by the product warranty. yTo prevent injury, this apparatus must be securely attached to the wall in accordance with the instrallation instructions. (This only pertains to Australia and New Zealand.) yUse the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty. yWhen measured from the back of the monitor, the length of each installed screw must be 8 mm or less. Wall Mount Plate Back of the Monitor Screw Dimensions : M4 x L10Wall Mount Plate Back of the Monitor Max 8 mm CaUTIon
ENGLISH 16UsInG THe MonIToR UsInG THe MonIToR Press the joystick button, go to Menu → Easy con- trol → Input, and then select the input option. y Do not press the screen for a prolonged time. This may cause image distortion. y Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a screensaver if possible. CaUTIon y When connecting the power cord to the out - let, use a grounded (3-hole) power strip or a grounded power outlet. y The monitor may flicker when turned on in an area where the temperature is low. This is normal. y Sometimes red, green or blue spots may ap - pear on the screen. This is normal. noTe Connecting to a PC yThis monitor supports the *Plug and Play fea- ture. * Plug and Play: A feature that allows you to add a device to your computer without having to recon- figure anything or install any manual drivers. HDMI Connection Transmits digital video and audio signals from your PC to the monitor. Connect your PC to the monitor using the HDMI cable as shown in the illustration below. DP OUT H/P HDMI IN 1HDMI IN 2 HDMI IN 1HDMI IN 2 USB IN 2 USB UPUSB IN 1USB IN 3 DP IN USB IN 2USB IN 1 USB IN 3 5 V 1.1 A 5 V 1.1 A mDP IN DP OUT DP IN mDP OUT y Make sure to use the supplied HDMI cable of the product. Otherwise, this may cause the device to malfunction. y Connecting your PC to the monitor using the HDMI cable may cause device compatibility issues. y Using a DVI to HDMI / DP(DisplayPort) to HDMI cable may cause compatibility issues. CaUTIon
ENGLISH 17UsInG THe MonIToR (Mini) DisplayPort Connection Transmits digital video and audio signals from your PC to the monitor. Connect the monitor to your PC using the displayport cable as shown in the illustra- tion below: DisplayPort DP OUT H/P HDMI IN 1HDMI IN 2 HDMI IN 1HDMI IN 2 USB IN 2 USB UPUSB IN 1USB IN 3 DP IN USB IN 2USB IN 1 USB IN 3 5 V 1.1 A 5 V 1.1 A mDP IN DP OUT DP IN mDP OUT Mini DisplayPort DP OUT H/P HDMI IN 1HDMI IN 2 HDMI IN 1HDMI IN 2 USB IN 2 USB UPUSB IN 1USB IN 3 DP IN USB IN 2USB IN 1 USB IN 3 5 V 1.1 A 5 V 1.1 A mDP IN DP OUT DP IN mDP OUT noTe y There may be no video or audio output de - pending on the DP (DisplayPort) version of the PC. y Make sure to use the supplied Mini Display - Port cable of the product. Otherwise, this may cause the device to malfunction. y If you use generic cables not certified by LG, the screen may not display or there may be image noises. Connecting aV Devices HDMI Connection HDMI transmits digital video and audio signals from your AV device to the monitor. Connect your AV device to the monitor using the HDMI cable as shown in the illustration below. DP OUT H/P HDMI IN 1HDMI IN 2 HDMI IN 1HDMI IN 2 USB IN 2 USB UPUSB IN 1USB IN 3 DP IN USB IN 2USB IN 1 USB IN 3 5 V 1.1 A 5 V 1.1 A mDP IN DP OUT DP IN mDP OUT y Make sure to use the supplied HDMI cable of the product. Otherwise, this may cause the device to malfunction. y Using a DVI to HDMI / DP(DisplayPort) to HDMI cable may cause compatibility issues. noTe
ENGLISH 18UsInG THe MonIToR Connecting Peripherals Usb Cable connection - PC The USB port on the product functions as a USB hub. y Make sure to install the most recent Windows OS service pack before using the product. y Peripheral devices are sold separately. y A keyboard, mouse, or USB device can be connected to the USB port. noTe Cautions When Using a USB Device y A USB device with an automatic recognition program installed, or that uses its own driver, may not be recognized. y Some USB devices may not be supported or may not work properly. y It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not adequate, the USB device may not be recognized properly.) CaUTIon To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC. Peripheral devices connected to the USB IN port can be controlled from the PC. DP OUT H/P HDMI IN 1HDMI IN 2 HDMI IN 1HDMI IN 2 USB IN 2 USB UPUSB IN 1USB IN 3 DP IN USB IN 2USB IN 1 USB IN 3 5 V 1.1 A 5 V 1.1 A mDP IN DP OUT DP IN mDP OUT (sold separately)
ENGLISH 19UsInG THe MonIToR Connecting Headphones Connect peripherals to the monitor via the head- phones port. Connect as illustrated. DP OUT H/P HDMI IN 1HDMI IN 2 HDMI IN 1HDMI IN 2 USB IN 2 USB UPUSB IN 1USB IN 3 DP IN USB IN 2USB IN 1 USB IN 3 5 V 1.1 A 5 V 1.1 A mDP IN DP OUT DP IN mDP OUT (sold separately) y Peripheral devices are sold separately. y If you use Angled earphones, it may cause a problem with connecting another external device to the monitor. Therefore, it is recom- mended to use Straight earphones. angled straight y Depending on the audio settings of the PC and external device, headphones and speaker functions may be limited. noTe
ENGLISH 20InsTallInG THe lG MonIT oR sofTWaRe InsTallInG THe lG MonIT oR sofTWaRe Insert the software CD included in the product packaging into your PC's \ CD drive and install the LG Monitor Software. The installation screen images are for reference only. The actual installation screen images may vary de- pending on the model. 1 Set up Internet Explorer as the default web browser. 2 Click lG Monitor software on the CD's main screen. When the file download window ap- pears, click Run. (Although the screen below may differ depending on your operating sys- tem or Internet Explorer version, the installa- tion methods are the same.) y Windows 7 must be updated to Service Pack 1 or higher. CaUTIon 3 Follow the instructions to proceed with the installation. 4 Check the I accept the terms of the agree- ment checkbox on the License Agreement screen and then click the next button. 5 Select the program that you want to install.