Metz Puros 37 Ml Operating Instructions

91
Opening the menu
MENU
37. Setting the Picture Format
Some of the following menu items are not
available on a 2 ** menu.
Setting the picture for
mat:
• Select the AV programme position which deli-
vers the picture by pressing the AV key and
then pressing the numeric key corresponding to
the device you want to use.
• Press the MENU key. The TV menu appears on
the screen.
• Press the blue key  to open the menu Picture
and sound. The menu item General picture
settings is preselected.
• Press numeric key...

92
38. Glossar y
AV programme position
AV devices have one or more connection sockets,
depending on the model. The designations of the-
se sockets are marked on the device (e.g. AV1).
On the AV device, you can select which socket
you want to use. The selected socket is shown on
the display of the AV device (e.g. A1 for socket
AV1).
Code
The settings for the childlock function are protec-
ted by a four-digit code: you can enter any des-
ired code, but you should note it for future use. If
you have...

93
Picture position, vertical
With widescreen films, subtitles are sometimes
transmitted in the black area at the bottom of the
screen. You can move the picture upwards on the
screen to ensure that these subtitles remain visible.
Standard values
The standard values are the settings (such as
brightness, sound volume, colour, etc.) which are
the same for all programme positions.
Spatial sound
This function can be used to create an artificial
stereo effect for programmes with sound in mono.
Stereo wide
For...

94
38. Glossar y
Tone settings
The tone can be set to either Normal or
Speech. In the setting Speech, the bass and
treble components of the sound signal are set to
make speech as easy to understand as possible.
The setting Normal is recommended for music
programmes.
VCR
The VCR function provides an optimal picture qua-
lity when playing back recordings from tape devi-
ces such as camcorders or video recorders.
Volume correction
The various stations broadcast their sound at diffe-
rent volumes. The TV set...

95
Mains voltage:
230-240 VAC, 50Hz
Antenna input:
75 Ohms, unbalanced DIN 45325
Channel coverage:
Standard channels 2 - 12, 21 - 69
Special channels S1 - S20, S21 - S41,
S42 ... S46 (Belgium channels OIR)
Power
consumption
Energy consumption per hour (Wh):
Multiply the power consumption in W by 1 hour 
Stand-by: < 2 W
Power consumption**
(to CENELEC /
TC 59 X)Music output power to
DIN 45324
into 4Ω(at 1 kHz)
(sinusoidal power)
*) into 8Ω
39. Technical Data
Clarus 32 MLca. 140 W2 x 10 W*
(2 x 7 W)
607 47...

96
Supported Signal Standards
Video HDMI
a) 720x480i/p 60Hz RGB                                     
b) 720x480i/p 60Hz YCbCr 4:4:4 / 4:2:2
c) 720x576i/p 50Hz RGB
d) 720x576i/p 50Hz YCbCr 4:4:4 / 4:2:2
e) 1280x720p 50/60Hz RGB
f) 1280x720p 50/60Hz  YCbCr 4:4:4 / 4:2:2
g) 1920x1080i 50/60Hz RGB 
h)1920x1080i 50/60Hz YCbCr 4:4:4 / 4:2:2
i) 640x480p 60Hz RGB
Video DVI-D
a) ... h) from Video HDMI, and
640x480p 60Hz RGB (DVI-D, analog)
800x600p 60Hz RGB (DVI-D, analog)
1024x768p 60Hz RGB (DVI-D, analog)...

97
39.1 Conversion possibilities
• DVB-S digital conversion set 029 NM 1119
for the reception of digital satellite stations for TV
and radio programs. The DVB conversion set is
installed in the TV set and you do not need any
additional remote control for it.
• DVB-T/C/analogue conversion set 
070 NM 1061
for the reception of digital terrestrial, digital cable
and analogue stations for TV and radio pro-
grams. The DVBD conversion kit is installed in the
TV set and you do not need any additional remote...

98
40. Basic differences between analog terrestrial
reception and DVB-T
Information for our dealers and interested
customers.
In order to understand how the behaviour
of DVB-T receivers differs from that of the
analog terrestrial receivers used until
now, two things are important: digital
transmission and the simultaneous broad-
casting network.
Digital transmission
A DVB transmitter does not transmit only
a single programme, but a set of pro-
grammes – normally six to eight. The
information for each...

99
40. Basic differences between analog terrestrial
reception and DVB-T
Addition
Cancellation
In most cases, only a few of the 8,192
carrier frequencies will be fully cancelled
out and the information which is lost can
be reconstructed by the error-correction
function of the receiver. Reception beco-
mes impossible only if very strong reflec-
tions cause the loss of too many carrier
frequencies. 
The phase relationship between two sig-
nals depends on the path taken by these
signals on their way to the...

100
Calling the menu
MENU
The settings of the satellite antenna system must
be entered in the menu Configuration so that
the TV set knows them.
These settings should always be made in the
order in which they are shown in the right-hand
column of the menu, starting at the bottom, i.e.
LNB supply voltage, DiSEqC system, etc..
LNB supply voltage
The LNB voltages for selection of the polarisation (hori-
zontal H = 18V, vertical V = 14V)
are already set and do not nor-
mally need to be changed.
If the cable...