McIntosh Projector Mdlp1 Specifications

							MDLP1
Video Projector
“Completingthe 
Home 
Entertainment Picture”
The MDLP1 Video Projector is everything you’ve come to expect from a
company with McIntosh’s unmatched reputation for quality and performance.
Designed as the ultimate centerpiece for a no compromise home theater it
features the latest generation Texas Instruments single-chip DLP light and
advanced processing circuitry that provides full 1080p HDMI Native input.
Unlike previous DLP projection devices, which relied on a 4 x 2 DLP device, 
the MDLP1 uses a 16 x 9 DLP light engine which matches the 1920 x 1080 
HD picture, pixel by pixel. 16 x 9 images are displayed using 100% of the 
light engine pixels. This HD native rate allows pure HD sources to be 
projected without the need to manipulate the signal in any way resulting 
in the purest most accurate picture possible. 
A projector is only as good as the optics used and McIntosh engineers designed
in the Konica Minolta optics which yield a picture which is tightly focused from
side to side, top to bottom and out to each corner. By using mechanical lens
shifting the projector will be square to the screen even when mounted at the top
or bottom of the projected image. This assures perfect focus at screen top and
bottom without resorting to keystone adjustments which distort the picture.
The MDLP1 is shipped with either the Medium throw lens allowing distance
settings of 1.27 through 1.85 times 16 x 9 screen width. The long throw lens 
will allow 1.85 through 2.78 times 16 x 9 screen width, allowing maximum
placement flexibility. Premium Konica Minolta Optical System
1920 x 1080, 16 x 9 Digital Micromirror 
Device for true 1080p HD Picture
2 HDMI Inputs
2 Component Inputs
Floor, Ceiling, Front or Rear 
Screen Operation Modes
Black Level Adjustment
Four Picture Modes
Five Built-In Preset Gamma Levels
18 User Menus for Saving 
Adjusted Images 
Lens Shifting
2000 Hour Lamp Life 
						

							For the Consumer’s Protection:  In order to ensure the highest level of customer satisfaction, “new”McIntosh
products may only be purchased over-the-counter or delivered and installed by an Authorized McIntosh Dealer.
McIntosh products that are purchased over the Internet, by phone or mail order are presumed to be “used”and 
do not qualify for any McIntosh Warranty. McIntosh does not warrant, in any way, products that are purchased 
from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced.
01.07.MDLP1.20K 35009300
McIntosh Laboratory, Inc. 2 Chambers Street, Binghamton, New York 13903-2699
Tel (607) 723-3512 • US Toll-Free (800) 538-6576 • Fax: (607) 724-0549 • www.mcintoshlabs.com
MDLP1
Video Projector
CEILING MOUNT 
WITH EXTENSION
Ceiling mount hardware is
included along with the
extension post for maximum
placement flexibility.
WORLDWIDE VIDEO
FORMAT SUPPORT
Video sources from around the
world, NTSC, PAL and SECAM
are supported. When in the
Automatic Mode the MDLP1 will
lock onto and display any video
source including all HD sources
without the need for extraneous
video conversion steps.
TRADITIONAL McINTOSH GLASS
PANEL APPEARANCE
The traditional McIntosh glass
panel is used for set mounted
operational controls. Illumin-
ated McIntosh logo may be left
illuminated or turned off as
desired. The custom designed
projector housing enhances the
MDLP1 appearance as well as
muting sound for quiet operation.
COMPANION PRODUCTS
The VP1000 Video Processor
and the AP1000 Audio Processor
are logical companions for 
the MDLP1. Your Authorized 
Dealer can provide additional
information on other McIntosh
product combinations.
OPTICAL CHARACTERISTICS PANEL0.8 16:9
1920 x 1080 pixels
Digital Micromirror Device
LALMPSuper High Pressure 200W DC
LENSF: 30.7 - 44.5mm (Medium Throw)
44.5 - 66.75 (Long Throw)
F: F3.0 / F6.0
PROJECTION SIZE 70 to 250 inches (Medium Throw)
80 to 300 Inches (Long Throw)
LIGHT OUTPUT600/700 ANSI LUMEN Typical 
(F5.0/F3.0)
INPUT/OUTPUT
COMPONENT IN
3 RCA x 2; Y, CB/PB,CR/PR
HDMI INHDMI x 2; HDMI 1.1 Compliant
DATA  I N1/8 Mini Jack
POWER CONTROL IN1/8 Mini Jack
5V-12V
POWER CONTROL OUT1/8 Mini Jack
5V
AC IN3 Prong Grounding Type
TRIG. 1 OUT, TRIG. 2 OUT1/8 Mini Jack x 2
Output: DC12V or 0V
RS-232CRS-232C Receptacle
GENERAL
POWER REQUIREMENTS
AC 100 –120V / 220 – 240V, 50/60Hz
POWER CONSUMPTIONLess than 350 W
STAND-BY CONSUMPTIONLess than 0.3W (AC 100-120V)
Less than 0.5W (AC 220-240V)
DIMENSIONS (H x W x D)6-3/4 (17.2cm) x 20-1/4 (51.4cm) 19-1/16 (50.1cm)
WEIGHT 40 lbs. (88.2kg) net, 54 lbs. (24.5kg) in shipping carton
OPERATING TEMPERATURE41° F (5°C) to 95° F (35°C)
OPERATING HUMIDITY30% to 85%