Home > Marantz > Projector > Marantz Vp12s4 DLP Projector User Manual

Marantz Vp12s4 DLP Projector User Manual

Here you can view all the pages of manual Marantz Vp12s4 DLP Projector User Manual. The Marantz manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 31

25
ENGLISH
3.
Wait at the least one hour for the lamp and
lamp unit to cool down.
4.
Read the caution and warning labels on the
unit.
Lamp cover
WARNINGTHIS COVER IS PROVIDED WITH
INTERLOCK TO REDUCE THE RISK OF
EXCESSIVE ULTRAVIOLET RADIATION.
DO NOT DEFEAT ITS PORPOSE OR
ATTEMPT TO SERVICE WITHOUT
REMOVING COVER COMPLETELY.
MODEL NO. VP-16S1
 / U1M
AC 120V   60HZ   2.0ASERIAL NO.
CAUTION : HIGH PRESSURE LAMP 
MAY EXPLODED IF IMPROPERLY HANDLED. 
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.ATTENTION...

Page 32

26
ENGLISH
8.
Press the ENTERbutton to return to the menu
and disconnect the cable of the color
temperature sensor from the projector.
Note:
If color temperature adjustment is not
correctly processed or if adjustment
processing is interrupted in course by
pressing the MENUbutton or for some other
reason, the below message appears on the
screen.
Also, adjustment processing can be
interrupted by pressing the MENUbutton.
9.
Turn the lens shift knob until returning the lens
to the screen position you want to...

Page 33

27
ENGLISH
If the lens becomes dirty or smudged, clean it with
a soft dry cloth only. Use optical lens cleaners that
are approved for eyeglasses or cameras. Do not
use a dampen cloth, detergent solution, or thinner.
It may damage the lens and remain as stains.
When replacement parts are required, be sure to
inform a Marantz authorized service center. Use
only replacement parts specified by Marantz.
Unauthorized substitutions may result in fire,
electric shock, or other hazards. And, the warranty
may not...

Page 34

28
ENGLISH
WARNING/LAMP indicator, ON indicator, and STANDBY indicator diagnose error mode of the projector as follows.
The lamp cover is not 
closed properly.
The lamp has failed, or 
the lamp is completely 
worn out.
Projector internal 
temperature is higher 
than the allowed level. 
Trouble has occurred 
with the fan.
Internal program error Color temperature 
adjustment failed. 
Close the cover correctly.
Replace the lamp and 
reset lamp life.Check if anything is 
blocking the exhaust vent.
Retry...

Page 35

29
ENGLISH
❖
Optical characteristicsPanel0.8 inch 16:9
1280 x 720 pixels
Digital Micromirror Device
Lamp
Super High Pressure 200W DC
Lensf: 30.7 to 44.5mm
F: F3.0/F5.0
Projection size60 to 250 inches 
Light output600/700  ANSI LUMEN typical 
(F5.0/F3.0)❖
Input/OutputVIDEO INRCA x 1
NTSC-3.58/PAL-4.43/SECAM
Composite video 1.0Vp-p/
75 Ohm
S-VIDEO INS-Connector x 1
NTSC-3.58/PAL-4.43/SECAMS-Video
COMPONENT3RCA x 2
IN
Y, C
B/PB, C
R/PR
RGB/HD IND-sub M 15 pin x 1
Analog RGB
HD:1080i, 720p, 480p
HDMI INHDMI...

Page 36

30
ENGLISH
STANDBYON
LENS SHIFT
LAMPWARRNING
ENTER FOCUS
MENU LEFT
RIGHT
DOWNINPUTUP
18 7/8 - 18 15/16 (480 - 481) 
8 12/16(222.0)
7 3/16(182.5)
  3 1/4
(   82.6)
9/16 - 2 7/16(15.0 - 61.8)
6 12/16
 (171.0)
5 5/8 (143.0)
3 - 3 9/16(76.0 - 91.0)
5 3/16 (132.0)
4 11/16 (119.0)
4 1/8(105.0)
2 5/16(58.0)1 10/16(42.0)
6 1/16(153.5)
5 3/4
(145.75)
12/16
(19.75)
11 11/16 (296.5)10 5/16 (262.0)
14 6/16 (346.5)5 1/4 - 5 5/16(133.5-134.5)
4 11/16(110.0)
3 11/16(93.5)
7 5/16(185.25)
(  64)2 8/16
DIMENSIONS
❖
Top
❖...

Page 37

www.marantz.comYou can find your nearest authorized distributor or dealer on our website.JAPANMarantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
U.S.A.Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A.EUROPEMarantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
Printed in Japan12/2004   00M15AV851250   ecmf-g
is a registered trademark. 
Start reading Marantz Vp12s4 DLP Projector User Manual

Related Manuals for Marantz Vp12s4 DLP Projector User Manual

All Marantz manuals