Marantz Vp 11s2l DLP Projector User Manual

Model VP-11S2 User Guide
DLP
®
Projector
714@6@DPWFS@.*4;




.

Ö”´ 

The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.
CAUTION
RISK OF ELECTRIC...

Lamp Handing Precautions
DANGERThis SHP uses a high voltage glass mercury vapor
lamp. The lamp can break or fail to light if handled
wrongly during replacement or because of the
projector’s surrounding temperature.
Lamp life also varies according to the lamp with
some even breaking or failing to light as soon as
they are used the first time. If the lamp breaks,
glass fragments may be scattered inside the lamp
unit and projector, and gas inside the lamp bulb
that contains mercury vapor may be emitted...

1
ENGLISH
TABLE OF CONTENTSIMPORTANT SAFEGUARDS ................................................................................................2
Caution  Concerning the Setup of the Projector ........................................................................2
Caution  Concerning the Lamp Replacement ...........................................................................2
Caution  Concerning the Lamp Unit...

2
ENGLISH
IMPORTANT SAFEGUARDS
There is potential glass particle hazard if the lamp ruptures.
There is a potential hazard of glass particle if the lamp ruptures.
In case of lamp rupture,contact your nearest Marantz Authorized Dealer or Service Center for a
replacement.
See “Replacing Lamp Unit”. (

P.31)
WARNINGTHIS COVER IS PROVIDED WITH
INTERLOCK TO REDUCE THE RISK OF
EXCESSIVE ULTRAVIOLET RADIATION.
DO NOT DEFEAT ITS PORPOSE OR
ATTEMPT TO SERVICE WITHOUT
REMOVING COVER COMPLETELY.
MODEL NO. VP-16S1...

3
ENGLISH
FEATURES•Incorporates the latest DLP
®chip -- “1080p DLP
®” (1920 x 1080 pixel, 16:9 wide panel). Using an
optimized system for movie viewing with specially designed image circuits and optical parts, the VP-
11S2 bring high color reproduction with the pitch black of movie films that reproduces images in rich
tones and crisp black.
•Images are sharply detailed, smooth and high quality owing to a powerful chip that builds into a
dedicated processor an image processing IC featuring Gennum’s proud...

4
ENGLISH
!3
!4
qFocus ring (

P.11)
Adjust the picture focus.wZoom ring (

P.11)
Adjust the size of the projected image.eLens Shift knob (

P.12)
Manually adjust the position of the image vertically.r/ I button (

P.18)
Press to turn the projector ON or STANDBY mode. tMENU button (

P.21)
Display the on-screen menu.Front and Top ViewPROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW
yENTER buttonPress to enter the selected menu item.uINPUT SELECT button (

P.18)
Selects the input signal (COMPONENT 1,...

5
ENGLISH
Rear and Terminals ViewzAC IN (

P. 9 )
Connect the supplied AC power code.xRGB INConnect the analog RGB output from an IBM VGA
or compatible equipment.cCOMPONENT VIDEO IN 1 and 2Terminals 1 and 2 have each Y, P
B/CB, P
R/CR
terminals. Connect them to the component video
output of a video device, AV amp/processor, DVD
player, etc.vS-VIDEO INConnect the S-VIDEO output from a video
equipment.bVIDEO INConnect the composite video output from a video
equipment.
nTRIG.1(TRIGGER 1)When the unit is...

6
ENGLISH
Remote Controller
INPUT V-MUTE
ENTERMENU
ASPECT
FULL CINEMA
VCR MODE
BLACK LEVEL
PATTERN
BLACK
NOR ZOOM THRUINFO.
C1 C2 S G1
H1 H2 V G2A1
A2 RGB G3
STD DYN
I M
AG4
THTRCOMP.1 COMP.2 S-VIDEO USER
HDMI 1 HDMI 2 VIDEO
AUX 1
BLANKING AUX 2
RC-11VPS1 REMOTE CONTROLLER
ON
STANDBYIRIS LAMP
C.TEMP GAMMA
B1
OFF
B3
B2
a
™9
£0
£1
£2
£3
£4
£5
£6
£8
£9 sdfg
hjk
l¡0¡1
¡2¡3¡4
¡5¡6¡7
¡8¡9 ™0 ™1
™2
™3
™4
™5
™6
™7 ™8¢0
£7¢1
aSTANDBY button (

P.20)
Turn the projector off.sIRIS buttonSwitches lens and...

7
ENGLISH
£7INPUT (Input signal select)
button (

P.18)
Selects the input signal. Every time the 3/4
buttons are pressed, the input signal rotates in the
order of COMPONENT 1 ↔COMPONENT 2 ↔S-
VIDEO ↔VIDEO ↔RGB ↔HDMI 1 ↔HDMI 2.£8BLACK LEVEL button (

P.26)
Sets the black level.
During analog signal input ......0 IRE/7.5 IRE
During HDMI signal input ........Expand/Normal£9PATTERN button (

P.11)
Projects a focus pattern on the screen.¢0ZOOM button (

P.18)
Sets aspect ratio to zoom mode.¢1THROUGH...