Marantz PMD671 Portable Solid State Recorder User Manual
Here you can view all the pages of manual Marantz PMD671 Portable Solid State Recorder User Manual. The Marantz manuals for Recorder are available online for free. You can easily download all the documents as PDF.
Page 11
- 11 - • play audio files on your computer • save audio files to: • your hard drive • a floppy • a CD-R disc • post streaming audio files on your web site • use software and your computer to transcribe digital recordings An editing program (PMDEdit, available from Marantz Professional for PC users) lets you convert and edit audio files that were recorded on the PMD671. Presets The PMD671 has three selectable Presets for commonly used recording situations. Preset 1, MP3 Stereo using your microphones, for...
Page 12
- 12 - Tracks are numbered from 01 to a maximum of 999. A new track (file) is automatically started each time recording is stopped using the STOP button. Using the "Auto TRK" feature, PMD671 can be set to start a new track at specific time intervals during recording (for example every minute). Using the "Manual TR" feature, you can start a new track during recording by sliding and re- leasing the REC switch. • Automatic recording The PMD671 can be set to stop recording when there is...
Page 13
- 13 - SOLID STATE RECORDER PMD671 POWER MIC ATTEN 0dB -20dBFLAT ANC LEVEL CONT.LIMITERALC MANUALOFF ONEDL PLAY STEREO L AUDIO OUTRSOURCE FILEMONITOROFF ONPRE REC MARK A-B REPEAT INPUTEDIT SINGLE OFFALLOFF ONINPUT LOCKTRACK JUMPMARGIN RESET REC UNDO MENU/STORE ENTER CANCELPLAY / PAUSE STOPUSB - / REW FWD / + 1 2 POWER -dB00 4020 12 620 over-dB R L L R -dBover 0 2 6 12 20 40 00-dB • There are four ways to power the PMD671: • Included AC adapter • AA Alkaline batteries (~ 5 hours @ 1450 mAh usage) •...
Page 14
- 14 - RAW (VTH - Virtual Third Head) RAW (Read After Write / VTH - Virtual Third Head) digitally mimics the third head of a three head tape deck. When on and the PMD671 is recording, the audio that is output to the LINE OUT, DIGI OUT, PHONES and SPEAKER is audio that has already been written to the CF card and not audio from the source. This allows you to actually listen to audio written to the CF card, monitoring that the recording is actually taking place. When RAW is off, the audio to the LINE OUT,...
Page 15
ALL OFFSINGLER AUDIO OUTLSTEREO FLAT-20dB 0dB MIC ATTEN REPEAT EDL PLAYON OFFMANUAL ALCLIMITER LEVEL CONT.ANC INPUT LOCKON OFF PRE RECON OFFMONITORFILE SOURCE EDIT INPUT A-B REPEAT MARK 7 OFF ON INPUT LOCK a 8 9 10 When power is on and the PMD671 is in REC/ PAUSE the recorder is constantly saving about 4 seconds* of audio input. This is called pre record cache. When recording is resumed from REC PAUSE by sliding the REC switch, the pre- recorded seconds are recorded. OFF: Turns the pre-record cache...
Page 16
ALL OFFSINGLER AUDIO OUTLSTEREO FLAT-20dB 0dB MIC ATTEN REPEAT EDL PLAYON OFFMANUAL ALCLIMITER LEVEL CONT.ANC INPUT LOCKON OFF PRE RECON OFFMONITORFILE SOURCE EDIT INPUT A-B REPEAT MARK 11 12 13 - 16 - ANC FLAT : : OFF ON EDL PLAY LEVEL CONT.LIMITER ALC MANUAL 11. ANC switch The ANC (Ambient Noise Cancel) switch lets you reduce ambient noise before recording on the internal microphone or MIC inputs. Ambient Noise Cancel positions do not change the memory used in recording. Examples of low ambient noise...
Page 17
ALL OFFSINGLER AUDIO OUTLSTEREO FLAT-20dB 0dB MIC ATTEN REPEAT EDL PLAYON OFFMANUAL ALCLIMITER LEVEL CONT.ANC INPUT LOCKON OFF PRE RECON OFFMONITORFILE SOURCE EDIT INPUT A-B REPEAT MARK a MIC-dB00 40 20 12 6 2 0 over-dB R L REMAIN RECTIME - 17 - Example display Stereo* MIC *The stereo or mono mode displayed and recorded depends on the St Mode and Mono Mode menu settings. Note: The PMD671 'listens' only to the selected input. For example if the input selected is LINE input, and no...
Page 18
- 18 - ALL OFFSINGLER AUDIO OUTLSTEREO FLAT-20dB 0dB MIC ATTEN REPEAT EDL PLAYON OFFMANUAL ALCLIMITER LEVEL CONT.ANC INPUT LOCKON OFF PRE RECON OFFMONITORFILE SOURCE EDIT INPUT A-B REPEAT MARK 15 16 17 18 A-B REPEAT A TRACK TIME TRACK -dB 00 4020 12 620 over-dB R L A- A-B TRACK TIME TRACK -dB00 40 20 12 6 2 0 over-dB R L A-B 15. A-B REPEAT button While in playback, press and release to start point A to point B repeat playback. A-B Repeat playback Point A (starting point) is set when the A-B...
Page 19
MARK TIME TRACK -dB00 40 20 12 6 2 0 over-dB R L - 19 - Skip An EDL Mark changed to 'Skip' will be skipped during EDL playback (playback with EDL PLAY switch at ON). Playback will skip to the beginning of the next EDL Mark. A skipped EDL recording is not erased. The recording is still on the CF card. The skipped EDL recording will play if the EDL PLAY switch is at OFF. You can change the type later. EDL A-B looping To playback an EDL A-B loop, press the PLAY/ PAUSE button to begin playback,...
Page 20
- 20 - MARK EDIT Renumber is flash- ing in the display. While Renumber is flashing (3 seconds) press and release the ENTER button . (Or press and release the STOP button to cancel.) ENTER button to confirm. ing will increase to 100%. Renumber is flash- ing in the display. While Renumber is flashing (3 seconds) press and release the MARK/ EDIT button again.TrkERASE is flash- ing in the display. While TrkERASE is flashing (3 seconds) press and release the ENTER button . Renum OK? will be flashing....