Mamiya Quartz Timed Automatic Exposure Camera Ze Manual

Shutter mode selector(Set at AUTO for normal operation. For othersettings, press lock button and rotate dial.)
Film advance lever
Exposure counter
Shutter release button. withcable release socket
Neck strap eyelet
Self-timer lever
Mirror (Delicate, dont touch!) -
E lens mounting index
Automatic aperture coupling lever
- Hot-stroe/eyepiece cover
Hot-shoe (X-contact)
Film rewind knob with crank(Pull up to open camera back)
ASA film speed scale
ASA film speed/exposure compensation dial
Exposure...

Viewfinder eyepiece
Shutter curtains(Delicate, dont touch!)
Film chamber
Battery cartridge
Battery car-tlidge release
Back cover withfilm memo holder
Film take-up spool
Film advance sprocket
Mamiya Winder film advance coupling
Mamiya Winder positioning hole
Rewind button
Mamiya Winder electrical contacts
Tripod socket
www.orphancameras.com  

WhutYou See in theView:find,er
When the shutter release button is lightlypressed, an LED lights inside the viewfinder
to indicate the correct shutter speed
automatically selected by the camera in
accordance with the aperture setting.
. The 1/1000 LED flashes at ihe rate of 8
times per second to indicate overexposure.
To obtain correct exposure, turn the aper-
ture ring until the LED stops flashing.. The LT LED flashes at the rate of 8
times per second to indicate underexposure.
Again, turn the aperture...

Match the red dots on the lensand camera body, then rotate thelens in the direction of the arrowuntil it clicks into position.
If the white button (A) is set atthe central index mark, theaperture ring cannot be turned. Inthis case, rotate the aperture ringaway from the index mark whiledepressing the white button.
Removing the lensPress the lens relerotate the lens tostops.
button andleft until it
www.orphancameras.com  

Now Carefully and Surely Load a Roll of Film
1. Open the back cover of thecamera by pulling up on the re-
wind knob. (Avoid direct sunlightwhen loading or unloading film.Stand in the shade or cast ashadow with your own body.)
Load a film cartridge into the filmchamber of the camera and returnthe rewind knob to its originalposition to hold the film in place.
2. Insert the end of the film intothe slot of the film take-up spool.3. First advanceoperating the film
then rotate the rethe direction of thethe...

4. Close the back cover of thecamera and advance the film bvalternately operating the ff;advance lever and releasing theshutter until the numeral 4I
appears in the exposure counter.\4hile performing this operation,make sure that the film isadvancing properly by checking ifthe rewind knob rotates when thefilm advance lever is operated.
Dont Forget to Set the Filrn
Set the film speed of the filmbeing used by lifting up the outerrim of the film speed dial androtating until the index indicatesthe correct...