Luxeon Projector X2 Plus User Manual
Have a look at the manual Luxeon Projector X2 Plus User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 9 Luxeon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
LCD Projector User Guide 8 88 8 8 Starting the Presentation We recommend turning on the projector and image sources in the order listed here. 1. Connect the signal cable to the computer or video source. 2. Connect the power cord to the projector and to a power source. The Power light begins to blink. 3. Turn on the presentation components in the order listed. To turn on the projector, remove the lens cap and press the Power button on either the remote control or the keypad, when lamp ready LED is on. Note: You might not be using all of these components for your presentation. Video source such as VCR, VCD, DVD or digital camera. Audio source if different from your video source or computer Projector Computer Power button Note : Many laptop computers do not automatically turn on their external video port when another display device is connected. Refer to your computer’s user guide for the function key or command that activates the port. MAC users may need to turn on SimulSCAN or monitor mirroring. Refer to the computer manual.
9
English
4. Position the projector by using the adjustable feet on the bottom of the
projector. Press the foot release buttons in the front of the projector to raise
or lower the feet.
5. Turn the focus ring to focus the image and turn the zoom ring to zoom in or
out on the image.
6. Make any necessary image adjustments by using the on-screen menus.
Turning Off the Projector
Turn off the projector and image sources in the order listed here.
To turn off the projector:
1. Press the Power button on the keypad or remote control.
A confirmation screen appears.
2. Press the Power button again to confirm.
The lamp turns off immediately but the fan continues to run until the
projector cools down around 60 seconds.
Note: You might not be using all of these components for your presentation.
Computer
Projector
Audio source if different from your video source or computer
Video source such as VCR, DVD or digital camera.
Starting the Presentation
LCD Projector User Guide
10 1010 10
10
OSD Menu Format and Description
Basic Menu
Description :
Use the up and down keys to select item.
Use the - and + keys to adjust value.
Hit ↵ to exit. Description :
Use the up and down keys to select function item.
Use the - and + keys to adjust value.
Hit ↵ to exit.
Picture Menu at PC Mode Keystone correction
Description: Use the - and + keys to adjust the keystone level of
display.
Volume
Description: Use the - and + keys to adjust the volume level.
Brightness
Description: Use the - and + keys to adjust the display brightness.
Contrast
Description: Use the - and + keys to adjust the display contrast.
11
English
Horizontal position (Data only)
Description: Use the - and + keys to adjust the display position in
horizontal direction
Vertical position (Data only)
Description: Use the - and + keys to adjust the display position in
vertical direction
Tracking (Data only)
Description: Use the - and + keys to adjust the sampling number
Frequency (Data only)
Description: Use the - and + keys to adjust the sampling clock
Picture Menu at Video Mode
Description : Use the up and down keys to select item.
Use the - and + keys to adjust value.
Hit ↵ to exit.
Tint (Hue) (NTSC Video only)
Description: Use the - and + keys to adjust the video tint/hue.
Color (Saturation) (Video only)
Description: Use the - and + keys to adjust the video saturation.
Video AGC (Video only)
Description: Use the - and + keys to adjust the video automatic gain
control.
Video Type (Video only)
Description: Use the - and + keys to adjust the video source type
DVD mode: Best quality mode.
VTR mode: Enable the video tape player mode for best compatibility.
OSD Menu Format and Description
LCD Projector User Guide
12 1212 12
12
Utilities - 2 MenuUtilities - 1 Menu
Description :
Use the up and down keys to select item.
Use the - and + keys to adjust value.
Hit ↵ to exit.
Digital Zoom & Pan
Description : Press + to enter zoom mode.
Zoom: Use “+” key to zoom.
Pan: 1. Press “Menu” to enter panning.
2. Press “+ “ to pan to right; “-” pan to right
3. Press
to pan upward; to pan downward.
Format
Description : Use the -and + keys to adjust the video aspect ratio.
Projection Type
Description : Press – and + to select different projection type.
Language
Description : Press + to select language.
13
English
Reset All
Description : PC mode: Press + to reset all adjustable PC setting.
Video mode: Press + to reset all adjustable Video setting.
OSD Position
Description:Showing the OSD position .
Use the - and + keys to adjust OSD position.
On top-left, top-right, center, bottom-left, bottom-right
Hit ↵ to exit.
Auto Image
Description : Press + key to adjust “Auto Image” setting.
ON: Enable image automatically fine tuning.
OFF: Disable image automatically fine tuning.
Utilities - 2 Menu
Auto Source
Description: Automatically search the input source.
Color Management
Description:Press up and down key to select different gamma correction
Press + key to execute
PC photos: Best for viewing PC photo.
MAC photos:Best for viewing MAC photo.
Rich colors:Best for colorful graphics.
B&W:Best for B&W text and spreadsheet presentation.
Graphic:Best for graphic presentation.
LCD Projector User Guide 14 1414 14 14 Status at PC Mode Description: Showing the input signal status and the detected PC mode with model number and firmware version information. Use + key to reset lamp hours to zero. Hit ↵ to exit. Status at Video mode Description: Showing the input signal status and the detected Video standard with aspect ration and firmware version information. Use + key to reset lamp hours to zero. Hit ↵ to exit.
15 English Lamp Hours Reset Description: Use the - to confirm lamp hours reset. Hit ↵ to exit. Lamp Hours Reset Input source select Description: Press up , down and INPUT keys to select different input source. Press + key to execute. PC: Select PC / MAC input port. S-Video: Select the S-Video input port. Video: Select the Composite video input port.
LCD Projector User Guide 16 1616 16 16 Auto Image In Progress Description: Message for auto image in progress Lamp Off Control Press the key again to turn lamp off, otherwise this screen will disappear automatically in 10 seconds. Out of Range Description: Message for input signal out of range.
17 English Distance Width x Height Diagonal 5 (1.5 m) 23~ 30x 17~ 23 (0.58~0.76 x0.43~0.58 m) 28.6~37.9 (0.7~1.0 m) 6.5 (2.0 m) 30~ 40x 23~ 30 (0.76~1.02 x0.58~0.76 m) 38.1~50.5 (1.0~1.3 m) 8 (2.4 m) 37~ 48x 27~ 36 (0.94~1.22 x0.69~0.91 m) 45.8~60.6 (1.2~1.5 m) 9 (2.8 m) 43~ 57x 32~ 42 (1.09~1.45 x0.81~1.07 m) 53.4~70.7 (1.4~1.8 m) 10.5 (3.2 m) 49~ 65x 37~ 48 (1.24~1.65 x0.94~1.22 m) 61.0~80.8 (1.5~2.1m) 12 (3.6 m) 55~ 73x 41~ 55 (1.40~1.85 x1.04~1.40 m) 68.6~90.9 (1.7~2.3 m) 13 (4.0 m) 61~ 81x 46~ 61 (1.55~2.06 x1.17~1.55 m) 76.3~101.0 (1.9~2.6 m) 14.5 (4.4 m) 67~ 89x 50~ 67 (1.70~2.26 x1.27~1.70 m) 83.9~111.1 (2.1~2.8 m) 16 (4.8 m) 73~ 97x 55~ 73 (1.85~2.46 x1.40~1.85 m) 91.5~121.2 (2.3~3.1 m) 17 (5.2 m) 79~105x 59~ 79 (2.01~2.67 x1.50~2.01 m) 99.1~131.3 (2.5~3.3 m) 18 (5.6 m) 85~113x 64~ 85 (2.16~ 2.87 x1.63~2.16 m) 106.8~141.4 (2.7~3.6 m) 20 (6.0 m) 92~121x 69~121 (2.34~3.07 x1.75~2.34 m) 114.4~151.5 (2.9~3.8 m) 33 (10 m) 153~202x114~151 (3.89~5.13 x2.90~3.84 m) 190.7~252.4 (4.8~6.4 m) Positioning the Projector The projector should be at least 2.5 feet (.9 m) from the screen but no more than 32 feet (10 m) away from the screen. Screen sizes are: Positioning the Projector