Lucent Technologies DEFINITY Performance Management Release 2.0 User Guide

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsOptions from a Displayed Report
Issue 1
November 1998
Page 131
Options from a Displayed Report
You have several options once you have a report displayed on your screen. You 
can:
• Change the sort order of a table
• Change the format of the report from a table to a chart or vice versa
• Print the report
• Save the report as a file
• If there is secondary data, switch between views of primary and secondary 
data...

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsOptions from a Displayed Report
Issue 1
November 1998
Page 132
To... Do this Result
Select primary 
or secondary 
data, if the Primary
 button 
displays. See 
About Secondary Data Fields
 on page 
126
 for 
secondary data 
field details.Click 
Primary
 and select data 
from the list of options.The data you select will appear in the 
report.
Change the sort 
orderFrom the Tools menu, click 
Sort
. Displays the Sort...

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsOptions from a Displayed Report
Issue 1
November 1998
Page 133
Change the 
report formatFrom the File menu, click 
Open > [Chart or Table]. 
If Chart
 is selected, displays Chart 
Properties window. Go to 
Set up Report 
in Chart Format
 on page 157
 for more 
detail.
If Ta b l e is selected, changes report output to 
a table using the sort values defined in the 
Send Output tab. Go to 
Set up Report in 
Table Format...

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsPrint a Report
Issue 1
November 1998
Page 134
Print a Report
This procedure describes how to print so that the printed report will appear as it 
displays on the screen (as a report image) or in a tabular format. Although there 
are several ways to print a report, this procedure explains how to print a report so 
that the printed report looks just like it does on the screen. See 
Define 
Destination of Report Output...

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsPrint a Report
Issue 1
November 1998
Page 135
3
To define printer detail from the Print Dialog window, enter the settings as 
described in the following table and click 
Print
. If necessary, consult with your 
UNIX system administrator for system-specific information. After you click 
Print
, the report will print on the designated printer. 

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsPrint a Report
Issue 1
November 1998
Page 136
Field Description
Copies
Number of printed copies.
Printer For specifying a UNIX print 
command. For example, the 
following command will produce 
a PostScript output file:
prt -d 30N68 -1 raw
File For creating a postscript file, 
using UNIX conventions.
Banner Page Title Specifies what will appear at the 
top of the page of the report.
Print Command Options For specifying...

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsPrint a Report
Issue 1
November 1998
Page 137
4
To define printer detail from the Print Properties window, change the settings 
as described in the following table and click 
Close
. After you click 
Close
, the 
report will print based on the UNIX print command you specify. These values 
are usually set up by your UNIX system administrator, but you can change 
them here. 

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsPrint a Report
Issue 1
November 1998
Page 138
Field
Description
Print Command The UNIX print command the system 
will use to print the report.
Page Width The width of the report. The default is 
72 characters for portrait mode.
Page Height The height of the report. The default is 
66 characters for portrait mode. 

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsSelect Managed Nodes
Issue 1
November 1998
Page 139
Select Managed Nodes
This procedure describes how to select which managed nodes in the Network 
Management System you want to report on. If the managed nodes have any 
corresponding components, you can also select which components of each 
system to report on.
Procedure
To specify which managed node to report on, do the following:1Click 
Performance Management  >...

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
7Administer ReportsSelect Managed Nodes
Issue 1
November 1998
Page 140
3
In the Select DEFINITY systems box, put a checkmark in the box next to each 
DEFINITY system you want to report on.
The default is all systems. You can choose any combination, but at least one 
system is required.