Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 561

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-37 The ISDN 8510 Voice/Data Terminal
17
Recommended power supplies are the 1151A1 and 1151A2 with
Battery Holdover, and MSP-1 (local) Power Supplies and the 1145A
and 1145B1 Bulk Power Supplies.
Terminating Resistors
The terminating resistor jumpers are located on the upper left side on the bottom
of the terminal. Above the pins, on the plastic...

Page 562

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-38 The ISDN 8510 Voice/Data Terminal
17
nAn 8510T voice terminal connected to a DEFINITY G3 or a DEFINITY ECS
canbeadministeredasitself.
nAn 8510T data terminal connected to a DEFINITY G2 or G3 or to a
DEFINITY ECS should be aliased as a 7507 with data.
Button Numbering
The following information can be used to administer the ISDN 8510T voice...

Page 563

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-39 The ISDN 8510 Voice/Data Terminal
17
nHow to set a password known only by the system manager
nHow to send or disable Button Number 11
Power Failure Operation
The 8510T cannot be used as an emergency station during power failure transfer
conditions.
FCC Registration
The 8510T voice/data terminal is FCC registered as a Class A terminal.
Hearing...

Page 564

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-40 The ISDN 8510 Voice/Data Terminal
17
nDesignation card
PEC: 31170
Comcode: 847065467 (package of six 8 1/2 by 11 cards, 67 sheets)
846819530 (package of tractor feed 9 8 by 17 cards, 34 sheets, to be
used with LabelMaster)
n8510 Data Upgrade Kit
PEC: 32254A
Comcode: 106811979
Adjuncts
The following adjuncts can be used with the 8510T...

Page 565

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-41 The ISDN 8520T Voice/Data Terminal
17
The ISDN 8520T Voice/Data Terminal
Figure 17-6. The ISDN 8520T Voice/Data Terminal
1
23
45 6
78
9ABC DEF
MNO JKL GHI
PQRS TUV
WXYZ
*O#Oper
Volume
MuteRedial
SpeakerExit
ConfDropTransferHold
a
b
c
d
ef
g
h
i
j
ISDN 8520T
Dir
NextMenu
Prev
k
l
m
n
op
q
r
s
t
Mess age
Adjunct Jack RS232 Connector
Dial Pad...

Page 566

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-42 The ISDN 8520T Voice/Data Terminal
17
The 8520T voice/data terminal is used with the ISDN communication system
through a 4-wire “T”-interface. The 8520T voice/data terminal offers the following:
20 call appearance/feature buttons, each with a red and green status light, buttons
for the Mute, Redial, Conference, Drop, Transfer, and Hold...

Page 567

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-43 The ISDN 8520T Voice/Data Terminal
17
Features
Nine Fixed Features
nCONF button
nDROP button
nTRANSFER button
nHOLD button
nMUTE button
nSPEAKER button
nEXIT button
nREDIAL button
nVOLUME button
Message Light
The red Message light goes on when a message is left for the user. This light
goes off when the user retrieves the message.
Call...

Page 568

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-44 The ISDN 8520T Voice/Data Terminal
17
Speaker (Listen-only) Feature
The 8520T voice/data terminal can be optioned for the Speakerphone (listen and
speak)
orthe Speaker (listen-only) feature. (The terminal is shipped with the
Speakerphone setting in place.)
The Speaker (listen-only) capability allows a user to engage in a one-way
conversation...

Page 569

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-45 The ISDN 8520T Voice/Data Terminal
17
nSearching the Directory for a particular entry, by name or by number, and
then placing a call to the number currently shown on the display screen
nViewing the contents of your Directory, and then editing, deleting, or
placing a call to the number currently shown on the display screen
nUsing to quickly...

Page 570

DEFINITY Enterprise Communications Server and System 75 and System 85
Terminals and Adjuncts Reference
555-015-201Issue 11
December 1999
ISDN Voice Terminals
17-46 The ISDN 8520T Voice/Data Terminal
17
Other Physical Features
Handset
The 8520T voice/data terminal is equipped with a K-type handset.
A K-type Noisy Environment Handset (PEC: 31052A) can also be purchased and
connected to the 8520T terminal.
Dial pad
The 8520T is equipped with a standard 12-button touch-tone dial pad for dialing
telephone...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server, System 75, System 85 Instructions Manual

All Lucent Technologies manuals