Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 51

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
43 Australia 
nInterfac e Comp anding : A-law
nLine Cod ing: HDB3
nSignaling Mode: CAS
nCountry Protoc ol: 2
nInterc onnec t: p b x
nCRC?: no
nId le Cod e: 11111111 
— ISDN-PRI (Private Network) Sig naling
This examp le assumes use of US Op tion 1 with fac ility assoc iated  
sig naling . Other feature op tions will req uire c hang es in one or more 
ad ministered...

Page 52

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
44 Australia 
— Line Cod ing: HDB3
— Sig naling  Mod e: isd n-p ri
— Country Protoc ol: 2
— Connec t: Network
—CRC: No
— Id le Cod e: 11111111 
nSignaling Group screen
— Assoc iated Sig naling : Yes
— Primary D_Channel: xxxx16 (xxxx= > dep end s on CP 
p hysical location)
nTrunk Group  Ad ministration sc reen
— Group Type: isdn-pri
— Service Type: public_ntwrk 

Page 53

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
45 Belgium & Luxembourg 
Belgium & Luxembourg
Ta b l e  1 7 shows the rec ommended  c irc uit p ac ks.
Table 17. Recommended and Available CPs in Belgium & Luxembourg 
Equipment Equipment Type
Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC 
AC-CMC
AC Power Voltag e & Freq 220V/50Hz 
Ring  Generator 25Hz
Tone Detec tor > TN2182B > TN744D TN420C
Tone Cloc k >...

Page 54

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
46 Belgium & Luxembourg 
Feature Administration
The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here....

Page 55

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
47 Belgium & Luxembourg 
nRoute Pattern ad ministration 
— First Dial Tone Detec tion (always need ed )
nNumb er Delete Dig its: 0
nInserted  Digits: +
— Sec ond  Dial Tone Detec tion (need ed  on some analog CO trunks)
nNumb er Delete Dig its: 2 (Dialed  String  00)
nInserted  Digits: + 00+
System Parameter Administration
Only those feature-related  p arameters that...

Page 56

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
48 Belgium & Luxembourg 
— DID Busy Treatment: Attend ant
— Pull Transfer: No
— Level of Tone Detec tion: Med ium
— Outp ulse Without Tone: Yes
— (Station-to-switc h) Rec all Timing :
nFlashhook Interval: No 
nDisc onnec t Timing : 350 ms
— Network Feed b ac k During  Tone Detec tion: No
nSystem Parameter Multifreq uenc y Sig naling  Ad ministration
— Inc oming  Call...

Page 57

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
49 Belgium & Luxembourg 
n2 Call Wait Tone:
1. (425/-11)(200)
Analog Trunk Administration
nCO Trunks
— Trunk Group  Sc reen
nGroup  Typ e: CO 
nDirec tion: two-way
NOTE:
All trunks in Belg ium are one-way b ut outgoing trunks 
must b e marked two-way in ord er to b e ab le to selec t 
c yc lic al hunt =  y.
nDig it Ab sorp tion List: b lank 
nCountry Code: 8
nDial Ac c...

Page 58

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
50 Belgium & Luxembourg 
nAnswer Supervision Timeout: 10 (This sets both the CP 
firmware timer and  software timer. Set to 0 for any trunk that 
will rec eive answer sup ervision.)
nDisc onnec t Sup ervision - In:
— Analog Trunks: no
— Dig ital Trunks: yes
nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s 
choice.
nDisc onnec t Timing : 500 msec  (This field...

Page 59

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
51 Belgium & Luxembourg 
nPPM: yes 
nFreq uenc y: 16 khz
nFlash Leng th: 100 ms
nDID Trunks
— Trunk Group  Sc reen
nGroup  Typ e: DID
nDirection: incoming
nCountry Code: 8
nTrunk Gain: hig h or low as req uired  b y loop  leng th
nDig it Ab sorp tion List: b lank 
nInc oming  Dial Typ e: MF
nTrunk Type: immed -start
nTrunk Termination: rc  (c omp lex imp ed anc e)...

Page 60

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
52 Belgium & Luxembourg 
nInc oming  Dial Guard : 50 ms
nInc oming  Partial Dial: 18 sec
nInc oming  Inc omplete Dial: 60 sec
nFlash Leng th: 100 ms
nTi e  Tru n k s
No sp ec ial Typ e Ap p roval reg ulations ap ply. Tie trunks are ad ministered  
on a c ase-b y-c ase b asis.
Digital Trunk Administration
This sec tion d oes not list all p ossib le valid  ad ministrable...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual

All Lucent Technologies manuals