Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 271

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
263 Israel 
4 Wire Digital Line
2 Wire Digital Line
Data Line
BRI-U Line
BRI-ST Line
Table 36. Recommended and Available CPs in Israel
Equipment Equipment Type
Continued on next page 

Page 272

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
264 Italy (Lucent Technologies) 
Italy (Lucent Technologies)
Ta b l e  3 7 shows the rec ommended  c irc uit p ac ks.
Table 37. Recommended and Available CPs in Italy (Lucent Technologies)
Equipment Equipment Type
Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC 
AC-CMC
AC Power Voltag e & Freq 220V/50Hz
Ring Generator 25Hz
Tone Detec tor > TN2182B > TN744D TN420C...

Page 273

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
265 Italy (Lucent Technologies) 
Country-Specific Feature
You c an use DEFINITY ECS the Europ ean CEPT Ad vic e of Charg e feature in Italy. 
Refer to the DEFINITY ECS Ad ministration and  Feature Desc ription for more 
information ab out Ad vic e of Charg e.
Feature Administration
The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
ap p...

Page 274

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
266 Italy (Lucent Technologies) 
Luc ent rec ommend s only the following  c all typ es b e used  outside North 
Americ a:
System Parameter Administration
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nFeature-Related System Parameters Ad ministration
—...

Page 275

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
267 Italy (Lucent Technologies) 
nUp d ate Transferred  Ring  Pattern: Yes
nLevel of Tone Detec tion: Prec ise
nWait Answer Sup ervision Timer: Yes
nMisop eration Alerting : Yes
nAllow c onferenc e via Flash: Yes
nOutp ulse Without Tone: No
nNetwork Feed b ac k During  Tone Detec tion: No
nInterc ept Treatment On Failed  Trunk Transfers: Yes
nStation Tone Forward  Disc...

Page 276

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
268 Italy (Lucent Technologies) 
nTrunk Type: loop -start or g round -start
nOutg oing  Dial Typ e: tone
nTrunk Termination: rc  (c omp lex imp ed anc e)
nDisc onnec t Timing : 500 ms (This field  will not be used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers...

Page 277

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
269 Italy (Lucent Technologies) 
nDisc onnec t Sig nal Error: 255 sec  (only Ground  Start)
nFlash Leng th: 100 ms
nOutp ulsing  Information:
— PPS:  1 0  p p s
— Make: 50 ms
— Break: 50 ms
— PPM :  Ye s
— Freq uenc y: 12kHz
nEn d  t o  En d  Sig n a li n g
— Tone: 350 ms (ac c ep t default)
nDID Trunks
— Trunk Group  sc reen
nGroup  Typ e: DID
nCountry: 4
nTrunk Type:...

Page 278

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
270 Italy (Lucent Technologies) 
— Trunk Group  Ad ministration sc reen (Timing )
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  DID 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 500 ms
nInc oming  Dial Guard : 50 ms
nFlash Leng th: 100 ms
nInc oming  Inc...

Page 279

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
271 Italy (Lucent Technologies) 
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.)
nSend  Answer Sup ervision: y
nRec eive Answer Sup ervision: y
— Disc ontinuous T1
nGroup  Typ e: tie, tand em, ac c ess, ap lt, or rlt
nTrunk Signaling Type: dis
nDial Ac c ess: Customer Op tion (No is rec ommend ed  to avoid  
toll fraud ) (Yes, for app roval...

Page 280

DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
272 Italy (Lucent Technologies) 
nTrunk Type (in/out): d isc /d isc
nSend  Release Ac k: n
nRec eive Release Ac k: n
nDisc onnec t Sup ervision - In: no
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.)
nSend  Answer Sup ervision: n
nRec eive Answer Sup ervision: n
— Disc ontinuous T5
nGroup  Typ e: tie, tand em, ac c ess, ap lt, or rlt
nTrunk...
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Application Notes For Type Approval Manual

All Lucent Technologies manuals