Loewe Xelos A 42 Plasma Tv Operating Instructions

21 -
Operating modes – TV
Calling additional functions
Select additional functions such as Image+✳, Teletext subtitles, 
Personal teletext pages, Headphone volume, Scan stations and 
to move the picture up and down.
Call timer overview
If timer recordings have been programmed, you will see when 
which station is recorded here.
Select picture format
The TV set sets the best picture format automatically when Auto 
format is switched on. If you want to set a different format, 
press this button until the...

- 22
DVB subtitles
If the station provides DVB subtitles, then you can have the TV display them 
permanently or suppress their display. You can also select between subtitles “for 
translation“ or “for impaired hearing“.
1.  Call the “TV menu“ via the MENU button.
2.  Select the “Settings“ line and confirm using OK.
3.  Select the “Miscellaneous“ line and confirm using OK.
4.  Select the “DVB subtitles“ line and confirm using OK.
Note: If you have selected “Subtitles off“, then the set generates an...

23 -
Operating modes – TV
Removing the CA module
1.  Switch the TV set off with the mains switch.
2.  Remove the cover from the back of the set 
on the upper left. 
3.  Press the eject button at the module slot; 
the module is unlocked.
4.  Remove the module from the set.
Inserting a new CA module
After you insert a new CA module (CI module 
(1 is 
displayed in the menu) and switch the TV set on, the 
following dialogue is displayed:
After you press the OK button, the system starts the wizard to carry...

- 24
Operating modes – TV
Image+
Image+ is a picture improvement specially developed by Loewe, which delivers a 
sharper, lifelike and colour-fast picture richer in detail and contrast. 
Image+ is not integrated in the Xelos A26/32 sets.
Image+ menu
Call the menu “Additional functions“.
Use to move to the corresponding selection/setting....
and use  to select/set and use....
to activate.
In the Image+ menu, the functions Image+ “on“, “off“ and “Demo“ can be set.
The Image+ settings can also be opened...

25 -
Picture in picture (PIP)
Note: The coloured keys do not work as described below with DVB-T stations in 
UK, but they operate as described on page 30 (Digital Teletext).
Picture in picture displays are possible if the set has an analogue PIP tuner or a di-
gital satellite tuner in addition to the analogue TV cable tuner. You can have a PIP 
tuner or a digital satellite tuner retrofitted. Set-specific equipment and retrofitting 
options for PIP and satellite tuners, see pages 44 and 45.
If there is no...

- 26
Operating modes – PIP
Functions in the PIP menu
In the PIP menu, you can set the PIP type (small picture or split screen) and the 
position of the small picture.
Call the PIP menu (PIP must be active, green bar/frame)
Setting the PIP type
You can have the PIP picture displayed as a small PIP or split screen. 
Switch to small PIP:
Select “Type“ and then “Small PIP“
For the small PIP, you will see a coloured frame around the PIP picture.Position of the PIP picture
Move the PIP picture with the arrow...

27 -
Operating modes – EPG
When receiving digital terrestrial and digital satellite stations, you may find that 
two identical EPG data are displayed in the “EPG (DVB)“ menu for one station. If 
you call the EPG menu in the EPG mode by using the MENU button, then select 
“Station selection,“ you can select the duplicate station and deactivate it by using 
OK).
You have direct access to the selection lines above to pre-select the day, the time, 
the station and the topic.
Blue coloured key: Call Select...

- 28
Operating modes – EPG
In front of the programme’s title, the system places an . This station is switched 
later to this programme when the set is switched on. If the TV is off, it switches on 
again automatically at the beginning of the marked programme if this has been 
set in the EPG menu. If you are out, a security prompt prevents the TV set staying 
on unattended.
Before leaving the upper selection lines using the blue coloured key, select a 
specific line. If you have switched back to the...

29 -
Operating modes – Teletext
In Multiple pages, scroll using . You can see which multip-
les pages can be called in the bottom menu line.
Call contents page 100
Call the TOP table
The TOP table is a general list of teletext. You can only call the 
table for stations that use the TOP operating system.
Use  to select the topic group. 
Select the topic column using . 
Select the topic with  and display page with OK.
Enter the page number directly
Displaying teletext pages
Stop self-turning pages...

- 30
Operating modes – Teletext
Programme timer recordings
A video and/or DVD recorder must be connected and logged in in the connection 
wizard.
Call the programme pages of the current station in teletext mode using the Direct 
recording button 
 . Scroll to the teletext page in which the programme to be recor-
ded is listed if necessary. Select the programme you want to record by with  
and confirm with the OK button. For “Timer data,“ select the VCR or DVD recorder 
and whether you want to record...