Loewe Spheros R26 Lcd Operating Instructions

31 -  
Radio menu
Call radio menu
In the radio menu, as in TV mode, you can set the sound, search for radio 
stations and store them (automatically or manually – not with DVB-T mode in 
GB), delete stations from the list, rearrange them or change names and set the 
switching off and alarm functions.
EPG - Programme guide
For the DVB radio stations, you can also use the programme guide if the station 
currently active supplies data.
EPG- Call Programme guide
Operating modes – Radio
Radio
Radio stations...

 - 32
Operating additional equipment
Search for and store the station of the video recorder (if no Euro-AV 
cable is available)
Switch on the test station on the VCR or insert a recorded tape and start play-
back. In some video recorders the station must be switched on by activating the 
modulator.
Then call the AV selection on the TV set with 0 AV. Select the menu item 
VIDEO in the AV selection and call using OK.
To prevent normal TV stations being found in the search, pull out the antenna 
plug from...

33 -  
Operating additional equipment
Timer recording with video or DVD recorder
You can programme timer recordings on the TV set. Programming can be done 
with the EPG programme guide (not with DVB-T in GB), teletext or manually. 
Call the Timer list menu with the 
 button and press the red coloured 
key for the Recording wizard. Select whether you want to programme the 
recording via EPG, teletext or manually. You also have the option to programme 
recordings directly from the EPG programme guide or...

 - 34
Operating additional equipment
Audio output AUDIO DIGITAL OUT
The digital audio signal is applied at the AUDIO DIGITAL OUT socket of the TV. 
For example, you can connect an external digital audio amplifi er or the Loewe 
Auro system here.
An analogue audio signal from the TV set or another sound source which is 
received at one of the Euro-AV sockets of the TV set is converted into a digital 
signal (PCM) and output at the AUDIO DIGITAL OUT socket. Conversion from 
external analogue AV sources to...

35 -  
PREOUT
LC R L L
SL LFE SR R RTO TVAUX1 INDIGITAL
IN
DIGITAL
OUT
TV
L-LINK 12V / 15mAEXT AUX OUT AUX 2
ON
Line IN Power OUT
OFF
Bass Intensity
Center to
System connector
230V~50/60Hz
Surr.
Front
Right
Surr.
FrontSubw.Left
RightCenterLeft
Slave
Master
R
R L
CL
Phase Min. Max.
TV
Sat0180
Loewe 
Individual Sound Loewe Flat-TV 
Loewe 
Auro
COMPONENT
VIDEO OUT
Y
Pb
Pr
AV2-SCART
SERVICE CENTER
DIGITAL OUT COMPONENT  IN
L
SL
SR
R C
LFEL
SL SR
R
C
FLE
Operating additional equipment
Connecting Loewe DVD...

 - 36
Operating additional equipment
Connecting other audio amplifi ers or active 
speakers
In the connection wizard, select HiFi/AV amplifi er under Equipment selec-
tion: audio component. The connection wizard allows confi guration of different 
audio amplifi ers (stereo amplifi ers, surround amplifi ers, analogue or digital) with 
different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the 
operating instructions for the audio amplifi er to be connected.
Select Digital under Audio...

37 -  
Operating additional equipment
HDMI (DVI) connection
The HDMI connection (High Defi nition Multimedia Interface) 
allows digital picture and sound transmission via a connecting 
cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD. 
The digital picture and sound data are transmitted without data 
compression and therefore lose none of their quality. In the equipment con-
nected, no analogue/digital conversion is necessary, which might also have lead 
to losses in quality.
DVI signals can be...

 - 38
Operating additional equipment
Sound from PC or Set Top Box
Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN 
L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifi er, you can select the 
digital audio signal in the connection wizard (TV menu - Connections - New 
devices/modifi cations) and assign it to the VGA/XGA socket. You can make the 
other settings for the audio amplifi er as described...

39 -  
Use the rotary switch if you want to switch over a VCR, DVD 
device or a Set Top Box.
Press the END and 

 - 40
Operating additional equipment
Using the RC3 remote control to operate a VCR
Set the rotary switch to VCR.
The infrared code and the functions for a Loewe VCR are 
preset at the factory.
In VCR mode, the following VCRs can be operated: ViewVision 8106H, 8136H, 
8176H, 6306H, 6336H, 6376H, 6396H, 4306H, 4376H, 2102M, 2302M, 4206, 
4236, 4276.
For other Loewe equipment than that listed, please use the original remote 
control.
Using the RC3 remote control to operate a DVD recorders or 
DVD player
Set...