Loewe Modus L42 Plasma Operating Instructions

1 -
233–32789.021
Operating Instructions
TV
■  Xelos A 42
■  Xelos A 37
■  Xelos A 32
■  Xelos A 26
■  Modus L 42
■  Modus L 37
■  Modus L 32
Neu für 5. Auflage:
Seite 3:   Abbildung geändert
Seite 39: Abbildungen geändert
Seite 42: Kontrastverhältnis 1200:1 bei 37“
BA32789_021XelosModusRel_5_GB.in1   1BA32789_021XelosModusRel_5_GB.in1   115.01.2007   16:53:5215.01.2007   16:53:52
  

- 2
Contents
Remote control - TV functions  3
Control unit  4
Connections to rear panel  5 – 7
Welcome  8 – 9
Integrated features  8
Scope of delivery  8
Transporting 8
Installation options  8
Notes on the screen  8 – 9
Cleaning 9
Disposal 9
For your safety  10
First installation  11 – 14
Remote control  11
Connection 11 – 12
Use of the binders for Xelos A 42 and Modus L 42  12
Using the conditional access module  12
Switching on  12
Automatic programming  13
Directing DVB-T antenna  14
Daily operation...

3 -- 3
Remote control – TV functions
Switch on/off - on stand by
Select station up 
(1
Blue button: (3 programme info on/off Yellow button: 
(3 previous station
Freeze picture on 
(1
Status display on/off (3; 
MENU: hide menu Open index; 
MENU: info texts on/off PIP on/off (picture in picture)
P+/P–
Select station up/down Switch over to operate DVD-Player
Sound menu on/off Switch over to the RADIO mode 
(2
Select station directly;
MENU: enter numbers or letters
Station list on; 
MENU: confirm/call Sound...

- 4
DR+
Station up,
in the menu: right
Switch TV set on/off
to standby Station down,
in the menu: left Display:
red = standby
green = operation
orange = operation without screen display
(radio mode, EPG data capture
or timer recording)
Radio on/off 
(1 (back to TV mode),
switching on the radio
from standby,
in the menu: down
Display DR+ : (2
white = Digital Recorder integrated, 
but not active
(no recording, no play)
green = Digital Recorder active
(timeshift or archive playback)
red = Digital...

5 -
 
Antenna/cable/analogue/digital
Audio output left/right (analogue) Audio input left/right (analogue) Center audio input (analogue) Headphone connection
S-VHS connection (AVS)
(i.e. for camcorders)Common interface
(CI-Slot)
Video input (AVS)
Audio input right
Audio input left
Mains
switch
Euro-AV-
socket1Euro-AV-
socket2Socket for
power cable
Service socket
VGA/XGA input
Satellite connection socket 
✳
HDMI (DVI) input
Digital audio inputDigital audio output
Component video inputs (Cb/Pb–Cr/Pr–Y)...

- 6
Connections to rear panel – Xelos A 32/37 and Modus L 32/37
✳   Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 44 and 45.
Headphones connectionCommon Interface
(CI-Slot) 
S-VHS connection (AVS)
(i.e. for camcorders)
Video input (AVS)
Audio input right
Audio input left
Mains switch
Audio output left/right (analogue) Audio input left/right (analogue) Center Audio input (analogue)
Satellite antenna 
(Sat tuner 2)
 ✳
Antenna/cable PIP tuner ✳
or satellite antenna...

7 -
89352.001 SERVICE 
VGA/XGA  HDTV IN  AUDIO OUT 
AUDIO DIGI  TA L 
IN LR OUT  AUDIO IN 
L 
SD/HD-COMPONENT IN 
C/ P rr Y  C/ P bb R C 
AV    2 
RGB / YUV  (                    )  AV    1  ANT -TV ANT -S AT 13/18 V        /350 mA 5 V        /80 mA HDMI  DVI (        ) 
Common
interface
(CI-Slot)
Headphone connection S-VHS input (AVS)
(i.e. for camcorders)Video input (AVS)Audio input rightAudio input left
Mains switch
Euro-AV-
socket 1
Antenna output PIP tuner 
✳
connect to tuner 1
or satellite antenna...

- 8
Welcome
Transporting
Only transport the unit in an upright position. Hold the set by the top and bottom 
edges of the housing. The plasma/LCD screen is made of glass and/or plastic 
and may break if not handled carefully. Should the LCD screen become damaged 
or should the liquid crystal begin to leak, then it is imperative you wear rubber 
gloves when removing the set. Should the liquid come in contact with your skin, 
thoroughly rinse with water immediately.
Installation options
As a desktop unit
A...

9 -
Call up the Index using the INFO button on the remote control, select “DRM 
(Digital Refresh Mode)“ and start the Refresh mode by pressing the OK button. Al-
ternating full-screen colour images will be displayed now instead of the TV picture. 
Run the Refresh mode for about as long as a freeze picture was displayed earlier. 
End the Refresh mode by pressing any button on the remote control.
Any effects resulting from an excessively long display of a freeze frame cannot be 
reversed using the “DRM“...

- 10
For your safety
For your safety and to avoid unnecessary damage to your TV set, please 
read and observe the following safety instructions:
•  This TV set is designed exclusively for reception and reproduction of video and 
audio signals. 
•  This equipment is designed for domestic and office 
environments and must not be used in rooms 
with high humidity (e.g. bathroom, sauna) or high 
concentrations of dust (e.g. 
workshops). If the equipment is 
used in the open air, ensure that 
it is protected...