Loewe Individual 46 Compose Full Hd Operating Instructions

							
11	-

Turning the set on/off
Switching the TV set to standby mode
Activate 	the 	mains 	switch 	on 	the 	bottom 	left 	of 	the 	set.
The	 display	 in	the	 control	 panel	on	the	 front	 of	the	 set	
will	be	illuminated	red,	the	set	is	now	in	standby	mode.
Switching the TV on/off on the control unit
Press	the 	on/off 	button 	in 	the 	middle 	for 	about 		seconds	
to	switch	the	TV	set	on/off.
Meaning	of	the	display	colour:
Red :		 Standby	modeGreen :	 TV	set	is	switched	onOrange :		 Radio	mode,	TV	set	receives	EPG	data	or	timer	
recording	active
Switching the set on with the remote control
Press	the	
on/off	button.
or:	
numeric	buttons	(0–99).
or:	TV 	button.
or:	OK 	button	–	 station	list	 is	called.
Switching the set off with the remote control
Press	the	
on/off	button.
➠ Before 	switching 	off 	the 	set 	with 	the 	mains 	switch, 	we	
recommend	you	to	switch	it	to	standby	mode.
Switching on/switching to radio mode
Press	
R 	on	the	TV	control	unit.
or:	RADIO button 	on	the	remote	control.
(radio	mode,	see	page	4).
First installation wizard
First installation after switching on for the first time
This	 wizard	 starts	automatically	 after	the	set	is	switched	 on	for	 the	 first	
time,	 however	 it	can	 also	 be	called	 later	manually	 in	the	 TV	
index ,	see	Repeat initial installation  on	page	14.
The	 first	 step	 with	 the	wizard	 starts	when	 selecting	 the	
language 	for 	the 	user 	prompts. 	From 	this 	point 	on 	follow	
the	instructions	on	your	TV	set.
Brief explanation of button functions:
Press	the 	ring 	(up, 	down, 	left, 	right) 	to 	move 	the 	cursor	
and 	to 	select 	settings.
By	 pressing	 the	
OK button  a	setting	 is	confirmed	 and	you	
will	go	to	the	next	step.
You	can	select	or	remove	several	items	with	the	
yellow button 	(see	example	below).	
When	an	element	is	selected,	it	is	marked	by	a	
checkmark	
 .	
Use 	this 	button 	to 	go 	back 	one 	step.
Exit	the	wizard	with	the	
END button 	(if	available).
An 	example 	of 	multiple 	selection 	using 	the 	
yellow button.
continued	on	the	next	page	Ž
Initial installation
OK
OK
First installation wizardWhich language do you want to use for operation?
Initial installationLanguageSprache    D                       Kieli        SFLanguage   GB                    Jezik       SLOLangue     F                       Jazyk      SKLingua      I                       Lisan      TRIdioma      E                       Språk      STaal        NL                     Sprog      DKJazyk      CZ                  Idioma      PΓλώσσα    GR                  Язык      RUS                                      Język      PL                   Språk      NNyelv      HProceed
Initial installationConnect antenna cable(s)Antenna cable(s) for:            to antenna socket(s):Antenna/cable (analogue)        ANT TV        DVB-T                        ANT TV        DVB-C                        ANT TVDVB-S (cable 1)                ANT SAT        DVB-S (cable 2)                ANT SAT2                              Connect/disconnectProceed                        BackOK
Display
Downloaded	From	TV-Manual.com	Manuals 
						

							
-	1

Start	the	automatic	station	search	with	OK.	
First	TV	stations,	then	radio	stations	are	searched	for.
The	 stations	 found	in	the	 automatic	 search	are	divided	
into 	the 	appropriate 	station 	blocks 	depending 	on 	the	
previously	 selected	antenna	 cables	(signal	 sources).	 Sub
-
sequently	 the	stations	 can	only	 be	re-sorted	 within	these	
blocks. 	At 	the 	beginning 	of 	the 	station 	list 	you 	will 	find 	the	
block	with	the	stations	of	the	preferred	signal	source.
Any 	mixed 	sorting 	of 	stations 	from 	different 	signal 	sources	
is	only	possible	with	the	favourites	list.
In 	conclusion 	the 	connection 	wizard 	and 	the 	sound 	com
-
ponents	 wizard	will	 start;	 with	their	 help	you	can	register	
and	 set	your	 video	 devices,	 decoders,	 speaker	system,	
or	 a	HiFi/AV	 amplifier	 and	connect	 them	to	the	 TV	set.	
DVD	 players	 and	DVD	 recorders	 are	already	 registered	
at	the	factory.	
You 	can 	start 	the 	connection 	wizard 	and 	the 	sound	
components 	wizard 	manually 	later 	and 	add 	new 	devices.	
Further 	information 	is 	available 	from 	page 	5	( Connection	
wizard )	and	page	9	( Sound	components	wizard).
If	 you	 have	 registered	 and	connected	 a	recorder	 in	the	
connection 	wizard, 	the 	Digital 	Link 	Plus 	transmission	
begins	 at	the	 end	 of	the	 sound	 components	 wizard.	If	
a 	Digital 	Link 	Plus 	capable 	recorder 	is 	connected, 	the	
station	 list	of	the	 analogue	 stations	is	transmitted	 to	the	
external	recorder.
You	 can	also	 call	Digital	 Link	Plus	under	
TV menu → Con-nections → Digital Link Plus.
If	 you	 have	 not	connected	 a	Digital	 Link	Plus	capable	
recorder,	you	can	abort	the	transmission.
Explanations of the DVB-T antenna:
With	good	 reception	 conditions	 a	room	 antenna	 can	be	
used	for	DVB-T	(socket	
ANT2).
Under 	less 	favourable 	reception 	conditions, 	it 	is 	advisable	
to	 use	 an	active	 antenna	 which	has	to	be	 set	 accordingly	
in	 the	 initial	 installation	 or	in	the	
TV menu	→	Connections	→	Antenna  DVB	→	Antenna  DVB-T 	(see	 DVB-T	 antenna	
on	this	page).
If 	the 	location 	is 	outside 	of 	the 	normal 	transmission	
range	 then	a	directional	 antenna	can	be	used	 to	improve	
reception	quality.
Initial installation
Explanations of the setting possibilities:
Select	the	country	for	country-specific	pre-settings.
Antenna/cable (analogue): analogue	stations	via	 cable/antennaDVB-T:	 digital,	terrestrial	stationsDVB-C:	 digital	stations	via	cableDVB-S (line 1):	 digital	stations	via	satellite
DVB-S (line 2):  digital	stations	via	satellite
If	 you	 are	using	 an	active	 antenna,	 then	select	
yes (5V) 
for	the	antenna	power	supply.
The	 conventional	 settings	will	be	derived	 from	the	selec
-
tion	 of	set	 location.	 Only	change	 this	if	you	 know	 other	
symbol	 rates	and	modulation	 types	or	if	you	 have	 to	spe
-
cify	the	network	ID	for	your	cable	network	(information	
available	 from	your	cable	 network	 provider).	 If	you	 want	
to	 run	 the	station	 search	independently	 of	the	 channel	
grid,	select	frequency	search	for	the	search	method.
Select	 which	 satellite(s)	 you	receive	 from	a	list.	 For	more	
than	 one	satellite,	 select	the	type	 of	your	 changeover	
switch	or	communal	satellite	system	additionally.	
Ask	your	dealer	in	this	regard.
Specify 	here 	whether 	the 	high 	band 	of 	the 	selected 	satel
-
lite	is	to	be	searched	in	addition	to	the	low	band.
Normally,	 you	do	not	 need	 to	change	 the	values	 for	high	
and 	low 	band, 	unless 	the 	LNC 	(LNB) 	of 	your 	satellite	
system	 uses	a	different	 oscillator	 frequency	 (important	
for	the	frequency	display).
After	 you	have	 made	 these	settings,	 you	should	 receive	
the 	picture 	and 	sound 	of 	the 	selected 	satellites 	(only 	with	
Astra1	and	HOTBIRD).
The	 symbol	 rates	are	specified	 by	the	 satellite	 provider	
and	normally	do	not	need	to	be	changed.
Select 	the 	signal 	source 	that 	provides 	the 	stations 	to 	be 	on	
top	of	your	station	list	(starting	with	station	slot	1).
Location	
of	TV	set
Antenna	
selection
DVB-T:	Antenna
DVB-C:	Settings
DVB-S:	
Satellite	
system
High	band
LNC	frequencies	
Low	Band	/	
High	Band
Symbol	rates
Favoured	
signal	source	
Start	search
Connecting additional devices
Digital	Link
Plus
Room	
antenna Active	
antenna
Unidirectional	
antenna
Downloaded	From	TV-Manual.com	Manuals 
						

							
1	-

Positioning/aligning DVB-T antenna
If	you	 are	receiving	 one	or	more	 DVB-T	 stations	 with	picture	 and	sound	
interference	 then	you	should	 change	 the	installation	 location	and	align-
ment 	of 	the 	antenna. 	Ask 	your 	dealer 	to 	tell 	you 	which 	channels 	are 	used	
to	broadcast	the	DVB-T	stations	in	your	region.
➠  In	normal	TV	mode,	without	other	displays.		
A	DVB-T	station	is	received	and	selected.	
Call	
TV menu.
	34 	Select	Settings,		6	go	to	the	menu	line	below.
	34 	Select	Stations,		6	go	to	the	menu	line	below.
	34 	Select	Manual adjustment,		OK	 call	manual	adjustment.
The	 signal	 source	 is	already	 on	DVB-T	 due	to	the	 station	
preselection.	
Position	 and	align	 the	antenna	 in	such	 a	manner	 that	
maximum	values	for	
C/N  and	Level 	are	obtained.
Blue button:  Start	search.
Search	 for	DVB-T	 stations	 one	after	 another	 and	compa
-
re	values	for	C/N 	and	Level.
Then 	position/align 	the 	antenna 	to 	the 	weakest 	station	
so 	that 	maximum 	values 	for 	
C/N  and	Level 	are 	obtained.
Thereafter 	perform 	an 	automatic 	search 	for 	all 	DVB-T	
stations,	see	page	.
Explanation of the setting possibilities:
Depending	on 	the 	selected 	channel 	and 	country 	the	
associated	 bandwidth	 of	7	or	 8	MHz	 will	be	set	 auto
-matically.
Initial installationOperating convenience
General information on menu operation
Use	 the	MENU  button 	to	 call	 menus	 for	the	 various	 modes.	 Additional	
menus	can	be	called	directly	with	the	remote	control.
The	 menus	 are	displayed	 at	the	 bottom	 of	the	 screen.	 At	the	 top	 you	 get	
additional	 information	 about	the	selected	 menu	item	(see	info	display	
on	page	14).	
➠  In	normal	TV	mode,	without	other	displays.
Call	
TV menu.
Example: Selecting and executing functions
34 	Select	Picture,		6	go	to	the	menu	line	below.
	34 	Select	Brightness,		6	go	to	the	menu	line	below.
	34 	Set	Brightness.
		 	Go	to	the	Brightness 	menu	line		
to	make	other	picture	settings.
	34 	Select	more ... 	,		OK  call	more ... 	functions.
	34	Select	Auto format,		6	go	to	the	menu	line	below.
	34 	Select	on / off.
Conclude	the	settings.
Inputs via numeric buttons Letters 	have 	to 	be 	entered 	for 	specific 	functions. 	Like	
using	 a	mobile	 phone	keypad	 (1	to	 9),	 press	 a	numeric	
button	until	the	desired	character	appears.	
The 	available 	letters 	are 	imprinted 	on 	the 	individual	
numeric	buttons.
ENDINFOSoundConnectionsRecordingSettingsPictureTV menu
Picture adjustment       ...
PictureHere you can adjust among other things: Contrast, colour, brightness, picture adjustment, sharpness, picture format.
Bandwidth
ENDINFO
Manual adjustmentSignal source          DVB-T                           DVB-C    DVB-S     AChannel              E05Frequency            177.50 MHzBandwidth            7 MHzName                12 TestC/N 96               Level 99Overwrite stationSearch
Signal sourceSelect the area in which you want the broadcaster to search here. You ca\
n use the          button to automatically select station by station.
 
						

							
-	14

Operating convenience
The index in the TV set
You	can	start	 all	wizards	 and	many	 operating	 functions	directly	from	
this	 point.	 The	complete	 function	scope	of	the	 TV	set	 can	 thus	 be	easily	
understood.
Alphabetic 	sorting 	is 	preceded 	by 	the 	items 	Language ,	Integrated features	
and	Repeat initial installation.
Call index
➠  In	normal	TV	mode,	without	other	displays.
Call	
Index.
You	will	see	an	info	text	for	the	highlighted	keyword	in	
the	info	display.
If	 an	 OK	 symbol	 appears	 in	the	 marked	 line,	this	function	
can	be	called	directly	with	
OK.
Selecting a keyword
Enter	initial	letters	with	the	
numeric buttons 	like	with	a	
mobile	phone	keypad	(see	page	1).
or	go	with:
	34	 to	the	preceding	/	next	letters,
	6	 from	line	to	line,
P+/P– 	scroll	backwards	or	forwards	in	whole	pages.
	 Example:	 You	want 	to 	have 	the 	TV 	set 	switch 	off 	automatically 	at	
a 	specific 	time:
	 	 Select	the	keyword	
Switch off → Automatic ,	with	OK 	you	
will	go	to	the	setting.
The info display
The	 info	 display	 shows	a	content-based	 info	text	for	each	 menu	 item	at	
the 	top 	edge 	of 	the 	screen 	to 	help 	you 	in 	making 	the 	settings. 	In 	conjunc-
tion	with	the	index	it	creates	a	convenient	control	system.
➠  A	menu	is	displayed.
The	 factory	 setting	makes	the	info	 display	 appear	 auto
-
matically 	for 	each 	menu 	item. 	In 	this 	case 	you 	can	
temporarily	hide	the	info	texts	with	the	
INFO button.
The	 automatic	 info	display	 can	be	hidden	 via	a	menu	
setting.	 Then	it	can	 be	displayed	 once	by	pressing	 the	
INFO	button.
You	 can	tell	if	an	 info	 text	is	available	 by	an	
INFO 	icon	
that	is	shown	in	the	lower	right	above	the	menu	bar.
Permanently display or hide the automatic info display
Once 	you 	have 	become 	familiar 	with 	how 	to 	operate 	the 	TV 	set, 	you 	can	
switch 	off 	the 	automatic 	info 	display.
➠  In	normal	TV	mode,	without	other	displays.
Call	
TV menu.
	34 	Select	Settings,		6	go	to	the	menu	line	below.
	34 	Select	Miscellaneous,		6	go	to	the	menu	line	below.
	34 	Select	On-screen displays,		6	go	to	the	menu	line	below.
	34 	Select	Automatic info,		6	go	to	the	menu	line	below:	yes	/	no.
ENDINFOSoundPictureConnectionsConnectionsRecordingSettingsTV menu
SettingsHere, you can search for the stations automatically or manually as well \
as setthe menu language, timer functions, parental lock, on-screen displays, e\
tc.
Stations             ...END
OK
P+P–OKaz-Activate                    Previous/next letterSelect letter                Page ↓↑
IndexLanguageIntegrated featuresRepeat initial installation*Access codeASSIST+Automatic dimmerAutomatic station programming
You can select your language for operating the TV set.
 
						

							
15	-

TV menu – Overview diagram
Operating convenience
Radio menu – Overview diagram
Settings
Station
Parental lock
Timer functions
TV menu
PictureSoundConnections
Language
Miscellaneous
On-screen displays
Time and date
Radio menu
SoundStationTimer functions
Recording
Recording wizard (1
Timer list
Pre-record time
Post record time
New devices/modifications (1
Sound components (1
Antenna DVB (1
Digital Link Plus
MiscellaneousManual adjustment of AV standardAssign digital audio inputAllow switching voltageRGB insertion at AV2
Switch off timesAlarm timesWake up withWake up signal volume
TimeDeviation from Universal TimeDateBeginning of daylight-saving timeEnd of daylight-saving timeSoftware update (1
DVB subtitles
Auto volumeAV output signalMaximum volumeSwitch on volumeVolume adjustment forcurrent station
Picture adjustment
Contrast
Colour intensity
Colour temperature
Brightness
Sharpness
Digital Noise Control (DNC)
more...
On-screen display timeOn-screen display positionVolumeAutomatic info
Search wizard (1
Manual adjustment
Change stations
Search wizard (1
Manual adjustmentChange stationsSelect/change favourites
Image+Picture formatMove picture up/downAuto formatFilm quality improvement (DMM)
Sound mode
DPLII mode (2
Sound adjustment
Headphone volume
Loudness 
more...
Sound mode
DPLII mode (2
Sound adjustment
Headphone volume
Loudness
more...
DVB character set
Activate switch-off positionSet switch-off positionBasic adjustment
Western EuropeanPolishStandard
Loudspeaker sound (3
Headphone sound (3
Auto volumeAV output signalMaximum volumeSwitch on volumeVolume adjustment forcurrent station
Switch off times
Alarm times
Wake up with
Wake up signal volume
Rotate TV (4
(1		A 	wizard 	is 	started 	here.(		 Menu 	item 	only 	appears 	when 	more 	than 		speakers 	are 	selected 	in 	the 	listening 	mode.(		 Menu 	items 	only 	appear 	for 	analogue 	stations.(4			 Menu 	item 	only 	appears 	when, 	for 	example, 	a 	stand 	with 	motor 	drive 	(see 	Accessories,	
Installation 	possibilities, 	page 	55) 	is 	used.
Downloaded	From	TV-Manual.com	Manuals 
						

							
-	16

Select station
With the keys P+ and P– on the remote control
P+/P–	station	up/down.
The	 station	 display	with	sound	 identification	 is	displayed	
briefly.
➠  If	favourites	 are	selected,	 the	station	 is	switched	 over	
in	the	favourites	list	with	P+/P– 	(see	page	17).
➠ The 	symbols 	for 	the 	sound 	identification 	are 	described	
on	page	1.	
➠  If	there	 are	additional	 languages	 or	DVB	 subtitles	 for	
DVB 	stations, 	then 	language 	and 	subtitle 	selection 	is	
shown	below	the	station	display.	
See	 also	 page	 1:	 Additional	 selection	possibilities	 for	
DVB	stations.
With the numeric keys of the remote control
1-digit stations
Keep	the
 numeric button 	pressed	for	one	second,	
the	station	changes	immediately.
or:	
Press	the numeric button 	briefly,	the	station	changes	
after		seconds	(changes 	immediately 	in 	case 	up 	to 	9	
stations 	are 	stored).
2-digit and 3-digit stations
Press	first	(and	second)	
numeric button 	briefly.
Keep	the	last	
numeric button  pressed	for	one	second,	
the	station	changes	immediately.
or:	
Press	all	the	numeric buttons 	briefly,	the	station	
changes	after		seconds	(changes	ilmmediately	up	to	
99	or	999	stored	stations).
4-digit stations
Press	all	four	
numeric buttons ,	the	station	changes	immediately.
➠ If	favourites	 are	selected,	 the	station	 in	the	 favourites	
list	 is	switched	 to	with	 the	numeric	 buttons	(see	page	
17).	A	maximum	two-digit	station	input	is	possible.
➠  If	you	 select	 an	unoccupied	 station	slot,	the	next	 avail-
able	station	is	switched	to.
With the station list
➠  In	normal	TV	operation,	without	further	displays,	no	
favourites	selected:
	OK 	 call	Station list.
P+/P– 	scroll	in	the	pages	of	the	station	list.
634 	Mark	stations.
or:	
Enter 	the 	number 	of 	the 	station 	with 	the 	numeric buttons.
The	marked	station	is	shown	as	a	small	picture.
  OK  the	marked	station	is	called.
Blue button: 	Changes 	sorting 	from 	numeric  to	alphabetic.
Enter	initial	letters	with	the	
numeric buttons	
like	with	a	mobile	phone	keypad	(see	page	1).	
The	first	station	for	the	specified	letters	is	marked.
634 Mark	stations.
  OK  the	marked	station	is	called.
ENDINFO09-OK
OK
P+P–
Station list
21:00 - 21:45  Urlaubsparadies - ToskanaScan stationsChange stationsChange sorting
      COMP. IN      HDMI1/DVI      HDMI2/DVI      VGA      AVS      DVD      VCR    0  VIDEO    1  Das Erste           2  ZDF                3  WDR Köln          4  Bayrisches FS   
Switch to ...Select stationFavourites
    5  hr-fernsehen          6  Phoenix              7  BR-alpha             8  3sat                 9  EinsExtra           10  EinsFestival         11  EinsPlus            12  ZDFinfokanal        13  ZDFdokukanal      14  ZDFtheaterkan      15  arte                16  DAS VIERTE       
Page ↑↓
ENDINFOOK
OK
P+P–az-
Station list
21:00 - 21:45  Urlaubsparadies - ToskanaScan stationsChange stationsChange sorting
3sat                 9Live                
arte                  ARD                 AVS
Bayrisches FS         BR-alpha             BR
CNN INT
Switch to ...Select letterFavourites
COMP IN
Das Erste             DSF                  DVDDVD-REC
EinsExtra             EinsFestival           EinsPlus              Eurosport            
Page ↑↓
Daily operation
Sorting	numerically
Sorting	
alphabetically
long
short		short		long
all	short
Downloaded	From	TV-Manual.com	Manuals 
						

							
17	-

Daily operation
With the favourites lists
You	 can	save	 and	call	your	 favourite	 stations	in	6	favourites	 lists	(e.g.	 for	
multiple	 users).	Each	favourites	 list	can	 contain	 up	to	99	 stations.	 After	
initial	 installation,	 10	stations	 from	the	station	 list	are	 already	 stored	in	
the	 first	 list.	Change	 the	favourites	 list	to	 suit	 your	 requirements	 (see	
Put  together – changing favourites lists 	on	page	4).
➠	In	normal	TV	mode,	without	other	displays:
  OK 	 calls	the 	station	list
.
Red button: 	calls	the	favourites	list.
Select	station	directly	with	
numeric buttons .	
Or:
P+/P–	scroll	in	the	pages	of	the	 favourites	list.
	 6 	Mark	stations.
	OK  the	marked	station	is	called.
	34 	Select	other	 favourites	list
➠ Other	 favourites	 lists	can	 only	 be	selected	 if	they	 also	
contain	stations.
Red button :	 Back	to	the	 station	list.
Green button:		Scan	 all	stations	 of	the	 currently	 selected	
favourites	list
.
Yellow button: 	Change	the	favourites	lists ,	see	page	4.
Explanation of the favourites lists
The	selection	 made	with	the	red	button	 (station	 list	or	 favourites	 list)	is	
retained 	until 	the 	next 	call. 	All 	inputs 	then 	refer 	exclusively 	to 	the 	currently	
selected	 favourites	list .	
If	 favourites	 are	selected,	 the	name	 of	the	 favourites	 list	appears	 after	
the	station	name.
Explanation of the icons following station names:
		 Digital	DVB-T	station	(terrestrial	via	antenna)
	 	 Digital	DVB-C	station	(via	cable)
		 Digital	DVB-S	station	(via	satellite)
	 	 Coded	station
Select video source
➠	 Please	 ensure	that	the	appropriate	 devices	have	also	been	 registered	
with	the	device 	connection	wizard 	(see	page	5).
Via AV selection
Call AV selection.
	34	Select	desired	device	or	connection,
	OK  to	switch	over.
A	signal	from	the	selected	video	source	should	now	be	
visible.
Via station list
➠ 	In	normal	TV	mode,	without	other	displays:
  OK  call	the 	station	list
.
In 	numerical 	sorting 	the 	connections 	or 	devices 	are 	always	
at	the	beginning	of	the	list.
In 	alphabetic 	sorting, 	the 	connections 	or 	devices 	are	
sorted	in	alphabetically.
	 6
34 Select	connection/device.
	OK  to	switch	over.
ENDINFOOK
OK
P+P–Switch to ...Station list
Favourites 1Favourites
  1 Das Erste            2 ZDF                3 WDR Köln            4 Bayrisches FS        5 hr-fernsehen          6 Phoenix              7 BR-alpha            8 3sat                9 EinsPlus           10 EinsExtra          11 MTV              12 VIVA              Select stationPage ↑↓Scan stationsChange favourites09-
OKDVD-RECDVDAV selectionAVSPC INHDMI1/DVIHDMI2/DVIVIDEO
ENDINFO09-OK
OK
P+P–
Station list
Scan stationsChange stationsChange sorting
      COMP. IN      HDMI1/DVI      HDMI2/DVI      VGA      AVS      DVD      VCR    0  VIDEO              1  Das Erste           2  ZDF                3  WDR Köln          4  Bayrisches FS   
Switch to ...Select stationFavourites
    5  hr-fernsehen          6  Phoenix              7  BR-alpha             8  3sat                 9  EinsExtra           10  EinsFestival         11  EinsPlus            12  ZDFinfokanal        13  ZDFdokukanal      14  ZDFtheaterkan      15  arte                16  DAS VIERTE         
Page ↑↓
 
						

							
-	18

Daily operation
Adjusting the sound
Switching sound off/onSound	off;
Sound	on:	Press	button	again	or	set	volume	
V+.
Setting the volume
V+/V–	volume	louder	/	quieter.
The	volume	bar	will	be	shown	briefly	if	no	other	menu	
is	displayed.
Setting the sound mode
Call	
Sound mode.
	34	Select	the	number	of	speakers	you	want	to	hear.
Additional sound settings for volume adjustment and for Sound mode:
➠	As	 long	 as	you	 can	still	see	 the	volume	 bar	or	the	
selection	of	speakers	for	 sound	mode:
		 Call	additional	sound	settings.
	
	34 	Select	sound	setting,
	6	 Go	to	the	menu	line	below.
	34 	Make	changes.
Sound settings via the TV menu
➠ In	normal	TV	mode,	without	other	displays.
Call	
TV menu.
34	Select Sound,		6	 go	to	the	menu	line	below.
	34 	Select	desired	sound	setting,	6	 Go	to	the	menu	line	below.
	34 	Make	changes.
Explanations of the sound settings:
Select	the	number	 of	speakers	 you	want	 to	hear.	 The	
selection	 depends	on	the	 connected	 sound	components	
(from	page	9)	and	on	the	transmitted	audio	signal.
➠  If	the	 number	 of	speakers	 appears	in	brackets,	 the	
sound	 of	missing	 speakers	 is	transmitted	 by	the	 existing	
speakers	(virtual).
The	 momentarily	 reproduced	audio	signal	 is	output	 with	
the	ideal	number	of	speakers.
Play	centre	sound	or	mono	(left/right).
Play	front	sound	(L/R	stereo).
Play	front	and	centre	sound.
Play	front	and	surround	sound.
Play	front,	surround	and	centre	sound.
➠  You	 can	also	 enter	 the	number	 of	speakers	 with	the	
numeric	buttons	of	the	remote	control.
play 	via 	an 	external 	HiFi 	amplifier. 	Selection 	is 	only	
possible	 if	an	 amplifier	 has	been	 selected	 in	the 	sound	
components	wizard.
Speech,	 Classical,	 Pop,	Custom	 music,	and	Custom	 film	
sound.
Adjust	the	headphones	volume.
Proper	boost	of	bass	and	treble	tones	at	low	volume.
Here	you	can	make	 Dolby	 Pro	Logic	 II	sound	 settings	 for	
movie,	 music,	matrix	and	personal	 settings.	Menu	item	
only	 appears	 when	more	than		 speakers	 are	selected	 in	
the	sound	mode.
call	with	
OK.
Selection	 possibility	 Mono/Stereo	 or	Sound	 1	or	 Sound	
	 for	 two-sound	 broadcasts	separately	for	speakers	 and	
headphones.	Only	available	for	analogue	stations.
Reduces 	volume 	differences, 	e.g. 	for 	advertisements 	that	
are	too	loud.
Sound	selection	for	two-sound	broadcasts.
Determining	the	maximum	volume	that	can	be	set.
Specify	 the	volume	 that	is	set	 when	 switching	 on	the	 TV	
set	 with	 the	mains	 switch.	 This	does	 not	affect	 switching	
the	set	on	from	standby	mode.
The 	volume 	can 	differ 	according 	to 	the 	individual 	stations.	
If	 the	 sound	 is	too	 loud	 or	too	 quiet	 in	relation	 to	other	
stations, 	adjust 	the 	volume. 	When 	the 	menu 	is 	open, 	you	
can	 select	 the	stations	 one	after	 another	 with	
P+/P–	and	
adjust	every	single	station	conveniently.
Sound	mode
optimal
12345
Amplifier
Sound	adjustment
Headphone
	vol.
Loudness
DPLII	mode
more ... Sound	
	Speakers/	Headphones
Auto	Volume
AV	output	
signal
Maximum	
volume
Switch	on
	volume
Volume	
adjustment	for	 current	station
ENDSound adjustmentVolumeSound modeDPLII mode24Headphone volume
4Sound mode         ...(5)optimal321
 
						

							
19	-

Daily operation
Adjusting the picture
Call	TV menu.
	34	Select	Picture,		6	go	to	the	menu	line	below.
	34	 Select	the	desired	picture	function,		6	 go	to	the	menu	line	below.
	34 	Make	changes.
Explanations of the picture settings
Switches	the	picture	 parameters	 between	standard	and	
personal	values.
Adjust	contrast.
Adjust	the	colour.
Set	warmer	or	cooler	tints	for	the	picture.
Adjust	the	brightness	of	the	picture.
Adjust	the	contour	sharpness	of	the	picture.
Removes	or	reduces	the	signal	noise	in	the	picture.
Call	with	
OK.
Image	improvement	on/off	and	demo	mode.
Setting 	possibilities 	for 	the 	picture 	format 	(see 	page 	0).
Move 	picture 	vertically 	(see 	page 	0).
With	 Auto	 format 	switched	 on,	the	TV	set	 recognises	 the	
picture	 format	for	
Cinemascope 	or	wide	screen	 movies	
and	adapts	accordingly.
Reduce	image	jolting
.
Standard values / personal values for picture adjustment
Call	
TV menu.
	34	Select	Picture,		6	go	to	the	menu	line	below.
	34 	Select	Picture adjustment,	6	 go	to	the	menu	line	below.
34 	Select	desired	values	for	picture,	OK	 call	selected	values	for	picture.
Explanations for picture adjustment
Custom	 adjustments	 of	
contrast,	colour	 intensity ,	colour	 temperature ,	brightness,	sharpness	and	 digital	 noise	supression 	are	 saved	 in	the	per-
sonal	 values .	There	 are	separate	 personal	 values	for	 every	 signal	 source	
(TV	analog ,	TV	digital ,	HD	analog ,	HD	digital ,	PC,	PhotoViewer ).	
By	 selecting	
Standard values 	the	 picture	 parameters	 are	reset	 to	factory	
values	for	the	respective	currently	active	signal	source.
For 	an 	explanation 	of 	the 	signal 	source; 	see 	glossary: 	
Signal  input groups.
In	 the	 index	 of	the	 TV	set,	 all	the	 picture	 and	sound	 adjustments	 can	be	
reset 	to 	the 	factory 	values 	for 	all 	signal 	sources 	in 	one 	step 	under 	
Reset pic-ture/sound	or	Initialise picture/sound 	or	Factory settings picture/sound.
Operation without remote control
Changing the station on the TV set
+ / –	Station	up/down.
Switching radio on or off or switching to radio
R  Radio 	on 	/ 	off 	or 	switching 	between 	TV 	and 	radio.
Calling the TV menu on the set
➠ Service is	for	customer	service	personnel	only.
  M 
call Direct control on TV set 	menu,
– / +	select	function.
M	or	R	go	to	the	menu	line	below,– / + 	make	changes.
  M 	 move	up	one	menu	line,
	– / + 	select	other	function.
BrightnessVolumeDirect control on TV set
19ContrastPicture formatStationAV selection
ENDINFOSoundConnectionsRecordingSettingsPictureTV menu
Picture adjustment       ...
PictureHere you can adjust among other things: Contrast, colour, brightness, picture adjustment, sharpness, picture format.
ENDINFOContrastColour temperatureColour intensityPicture adjustmentPicture (standard values, TV digital)TV menu
Picture adjustmentHere, you can switch between the preset standard values for contrast, co\
lourintensity, colour temperature, brightness, focus and digital noise reduc\
tionand your own personal values. Each of the signal input groups „TV ana\
logue“, „TV digital“, „HD analogue“, „HD digital“, „PC“ \
and „PhotoViewer“ has its ownvalues. Refer to printed operating manual.
Standard values (TV digital)               ...
ENDINFO
OKPicture adjustmentPicture (personal values, TV digital)TV menu
Standard values (TV digital)Personal values (TV digital)
Picture	adjustment
Contrast
Colour 	intensity
Colour	temperature
Brightness
Sharpness
DNC
more ...
Image+
Picture	format Vertical	
picture	hold
Auto	format
DMM
Downloaded	From	TV-Manual.com	Manuals 
						

							
-	0

Daily operation
Button functions
Each	operating	 mode	of	the	 TV	set	 (TV,	 Radio,	 Teletext,	 EPG,	or	Picture	
in	 Picture)	 has	a	separate	 menu	and	separate	 functions	 for	the	 coloured	
buttons.	 The	assignment	 of	the	 coloured	 buttons	is	illustrated	 in	the	
description	of	the	individual	operating	modes.	
Below,	 some	of	the	 button	 functions	 are	listed	 which	 you	need	 for	daily	
operation	of	your	TV	set.
Functions of the coloured buttons in TV mode
Red button: 	Digital	Recorder:	 DR	archive	on/off.
Green button: Call	menu	Teletext	subtitles.
	34	Select	size	of	the	 Teletext	subtitles,
	OK	 show	 Teletext	subtitles.
	 	 (display	only	if	subtitles	are	available).
END:	 Teletext	subtitles 	off.
Yellow button:	Go	to	the	last	viewed	station.
	Use	this	button	to	quickly	switch	back	and	forth	
between	two	stations.
Blue button:	Show 	programme	info.
Permanent display of time
Press	twice	in	rapid	succession,
	
the	time	is	permanently	displayed.
K  or	END :	Hide	time.
Selecting the picture format
Press	the	picture	 format	button	 until	the	desired	 picture	
format	is	marked	or
	34 	to	select	the	desired	picture	format. The	
Panorama
	picture	 format	can	be	switched	 between	
proportionally	correct	and	format	filling	reproduction.
Dark 	margins 	are 	visible 	on 	the 	right 	and 	left 	of 	the 	picture	
in	proportionally	correct	reproduction.
Switching	 over:	Keep	 the	
M	button	 on	the	 set	pressed,	
at	 the	 same	 time	press	 the	Picture format 	button	 on	the	
remote	control	briefly.	
Resetting:	Press	the	same	button	combination	again.
Explanations of the picture formats
➠  Setting	possibilities	depend	on	the	displayed	picture	content.
	16:9 	 Proportionally 	correct 	display 	of 	16:9 	programmes.
	 4:	 Proportionally	correct	display	of	4:	programmes.
	Panorama 	 Proportionally 	correct 	or 	format 	filling 	reproduction 	of 	4: 	
broadcasts 	on 	the 	16:9 	screen. 	Station 	logos 	and 	subtitles	
remain 	intact. 	See 	above 	for 	switching 	Panorama 	mode.
	Cinema 	 Proportionally 	correct, 	format 	filling 	display 	of 	4: 	broad-
casts	on	16:9	screens.	
	Zoom 	 Proportionally	 correct	display.	 Maximum	 picture	magni-
fication.	
	PALplus 	 Is	a	4:-compatible	 16:9	picture	 broadcast	 supplied	by	
the	station	which	is	detected	automatically.		
If	 a	high-resolution	 picture	signal	is	displayed	 on	the	 TV	
set 	or 	fed 	in 	via 	the 	interfaces 	PC 	IN, 	HDMI1/DVI, 	HDMI /
DVI	 or	COMP.	 IN,	the	 picture	 formats	 16:9	TV,	4:	 TV	as	
well	as	 16:9	PC ,	4:	PC 	and	
Zoom	can	be	set.
Move picture vertically
➠ In	normal	TV	mode,	without	other	displays:
	 6	 Move	picture	up/down.
To	 show	 subtitles	 or	news	 tickers	 which	have	been	 cut	
off,	 the	picture	 can	be	moved	 up	or	down	 in	the	 picture	
formats 	
Panorama ,	Cinema 	and 	Zoom 	(not 	with 	high	
resolution	signal)	with	the	arrow buttons	 6.
Call Assist+
Call	the	
Assist+	menu.
	34	Select	 DR	archive ,	Radio,	Favourites ,	PhotoViewer ,	Index,	Personal	text	pages.
	OK 	 calls	the	function.
Detailed info (teletext)Programme previewDetailed infoProgramme info          14:43
1  ARD14:30 - 15.15    Urlaubsparadies Toskana   
ENDOK
ENDINFOOKwith double sizewith normal sizeTeletext subtitles
   14:42
OKENDINFOPhotoViewerIndexRadioDR archiveASSIST+
ActivateOKFavouritesPersonal text pages