Loewe Individual 46 Compose 3d Operating Instructions

31 -
english
 Select time / date.
   If no values or no correct values have been entered 
for the data and time, enter the correct values with 
the numeric buttons here.
 OK Proceed.
Select sound components.
   This selection indicates which sound components 
you want to use to hear your TV sound. Depending 
on the selection, the sound component wizard starts 
with which you can make further settings.
   The sound component wizard is described from page 
117 and can also be started at any time...

- 32
english
  Select station
 Select station  with P+ / P– 
P+/P– Station up/down.
The status display with station title, progress bar, time and 
sound identification signal is shown briefly (see page 42).
➠  If Favourites are selected, you can change to the corre-
sponding station in the Favorites list using P+/P– (see 
page 33).
➠  The symbols for the sound identification are described 
on page 42. 
➠  If there are additional languages or DVB subtitles for 
DVB stations, then language and subtitle...

33 -
english
 Select station  via  favourites list
You can save and call your favourite stations in 6 favourites lists (e.g. for 
multiple users). Each favourites list can contain up to 99 stations. After 
initial installation, 10 stations from the station list are already stored in 
the first list. Change the favourites list to suit your requirements (see Put  
together / change favourites lists on page 47).
➠ In normal TV mode, without other displays:
 OK  calls the station list.
Red button: Calls the...

- 34
english
   Adjusting the sound 
  Switching  sound  off/on
  Sound off.
Sound on:  Press the button again or increase the volume 
using V+.
  Setting  the  volume
V+/V– Volume louder / quieter.
The volume bar will be shown briefly if no other menu 
is displayed.
  Setting the Sound mode
Call Sound mode.
 Select the number of speakers you want to hear.
Additional sound settings
➠  As long as you can still see the volume bar or the 
selection of speakers for sound mode:
 Call additional sound...

35 -
english
 Explanations of the sound settings:
For analogue stations: In the case of programmes with 
twin sound, you can select separately between Mono/
Stereo or Sound 1 or Sound 2 for the loudspeakers and 
the headphones. 
For DVB channels: You can choose here if you wish to 
listen to a special soundtrack for the visually impaired over 
the speakers. This soundtrack uses an  audio commentary 
to describe the action taking place on-screen.
The menu item only appears if an audio commentary is...

- 36
english
   Adjusting the picture 
MENU: Call TV menu.
 Select Picture,
 go to the menu line below.
 Select the desired picture function,
  go to the menu line below.
  Make  changes.
Explanations of the picture settings:
Select the settings for your TV set‘s 3D display (see page 38).
You can switch between three fixed picture setting vari-
ants and the three personal picture values that you have 
set here (see page 37).
The contrast setting depends on the brightness of the 
room. The...

37 -
english
  Move  picture  vertically
➠ In normal TV mode without other displays.
Move picture up/down.
To show subtitles or news tickers which have been cut 
off, the picture can be moved up or down in the picture 
formats Panorama, Cinema and Zoom (not with high 
resolution signal) with the arrow buttons .
 Presettings / Personal settings for picture adjustment
MENU: Call TV menu.
  Select Picture,
 go to the menu line below.
 Select Picture adjustment,
   go to the menu line below....

- 38
english
   
3D function
You can use the 3D functionality of your TV set to display 3D material 
transmitted by a channel or from an external player that is connected.
You require a pair of Loewe Active 3D Glasses to be able to use the 3D 
functionality in its entirety (see Accessories on page 140). Please read 
the operating instructions included with the 3D glasses.
3D settings
Using the 3D settings you can select the correct display format, should 
this not have been detected automatically. What’s...

39 -
english
 Picture format / 3D mode
If 3D contents are recognised by the TV device, the picture format can-
not be subsequently changed. The picture format when in 3D operation 
is always 16:9 PC.
The 3D mode can be changed using the Picture Format button.
Select the 3D mode.
Refer to page 38 for further explanations.
Instruction / Symbol
If 3D content is detected by the TV set, a corresponding message appears 
if Automatic info Ø yes is selected in the menu (TV menu Ø SettingsØ 
Miscellaneous Ø...

- 40
english
  Button functions
Every operating mode of the TV set (TV, Radio, MediaPortal, Teletext, EPG, PIP, 
and DR archive) has its own menu and own functions for the coloured buttons. 
The function of the coloured buttons is shown at the bottom of the menus 
and wizards. Below, some of the function are listed which you need in TV 
mode for the daily handling of your TV set.
  Coloured buttons in TV mode
➠ In normal TV mode, without other displays.
Red button: If an interactive data service is...