Loewe Individual 46 Compose 3d Operating Instructions

121 -
english
 OK  continue to set the
Distance to left front speaker.
➠  Measure the distances from your listening position to 
the front, surround, and centre speakers respectively. 
The digital audio decoder calculates delay times from 
this for the loudspeaker signals, so that these reach 
the listener simultaneously.
Set the distance between the left front speaker 
and your listening position in 10 cm steps.
 OK continue respectively to the other speakers and 
 adjust the distance.
➠ After...

- 122
english
AUX IN
R
L
SR
R
SUB
C
L
SL
DIGITAL IN
Connecting digital audio amplifiers
Continuation of the left column above ...
For digital audio transmission: Select yes.
Connect the digital audio output of the TV set AUDIO DIGITAL OUT with 
the digital audio input of the amplifier via a cinch cable:
Sound formats, amplifier type and other settings, see explanations of the 
setting possibilities (left hand column).
Connecting analogue audio amplifiers
Continuation of the left column above ...
For...

123 -
english
DIGITAL
OUTAV
Audio connection in HDMI/DVI devices
External devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI 
adapter to one of the HDMI sockets of the TV set, you can connect the 
digital sound of the external device to the digital audio input socket 
AUDIO DIGITAL IN. 
The assignment of the digital audio input to the corresponding HDMI 
socket of the TV set takes place as described in the column on the left.
If you want to use the analogue...

- 124
english
  The direct way to  record
You can programme  timer recordings via the integrated Digital Recorder (if 
installed) or connected recorders on the TV set. The  recording wizard is in-
tegrated at several places for programming a recording. You will find further 
information on recording with the digital recorder from page 91 onwards.
Programming a timer recording with the EPG
➠  You are in EPG mode; if not, press the EPG button.
 Mark the desired broadcast.
RECORD button: Call Timer data...

125 -
english
 Programming the timer with the timer overview
All programmed recordings, marked programmes and copy orders are listed 
in the timer overview. You can also programme new recordings, mark other 
programmes and copy pre-recorded programmes from the DR archive to 
an external recorder with the timer overview.
Call DR-archive.
Red button:  Call Timer list.
Red button:  New entry (see right hand column).
Green button: Change recording.
Yellow button: Delete recording.
Blue button: Delete memo....

- 126
english
  Timer recording with external devices
➠  The recording of HDTV stations with external devices is only possible 
to a limited degree. The HD transmission is scaled down to SD quality 
and output at the AV output for the recording.
Recorder with  Digital Link Plus
If you use an externally connected recorder with Digital Link Plus or a 
similar system, the TV set and connected recorder exchange data (e.g. 
compare station lists TV set/recorder or timer data of analogue stations). 
Please...

127 -
english
  Operating Loewe equipment
Using the remote control for the TV mode of the TV set
Press the  TV button, the display above it will light for 
approx. 5 seconds.
Using the remote control for a Loewe recorder
Press the  REC button, the display above it will light for 
approx. 5 seconds.
Using the remote control for a Loewe player
Press the  DVD button, the display above it will light for 
approx. 5 seconds.
Using the remote control for the radio mode of the TV set
Press the  AUDIO button, the...

- 128
english
  Software update
In the software update (package update) all the software releases in the 
TV are scanned and updated as required.
To do this, insert the USB stick with the downloaded software into a free 
USB port on the TV set (see connections page 11).
Calling Software update
MENU: Call TV menu.
 Select Settings,
 go to the menu line below.
 Select Miscellaneous,
 go to the menu line below.
 Select Software update,
 OK Call Software update Wizard.
   The versions of the...

129 -
english
 New software package found
 
 OKProceed.
 OKStart loading software.
END: Exit wizard.
Load new software package
A bar shows you the progress of the download. This 
process can take up to 50 min. Do not turn your set off 
during this time! 
You will be informed at the end of the update.
After finishing loading: 
Switch the TV off and back on at the mains switch. 
Software update
OK
SOFTWARE UPDATE WIZARD
Software package:       current V1.6.0.0   new V2.1.0.0
If you want to load the new...

- 130
english
   
USB keyboard
You can connect a USB keyboard to one of the USB ports of your TV set 
and use it in place of a remote control. With it, you can type internet 
addresses more comfortably into the browser and you can type charac-
ters more easily when changing the names of channels or inputting lists 
of favourites.
The keyboard can completely replace the remote control. An overview of 
the button assignment is on the right hand side of the table.
  Button combinations
Keyboard Remote...