Loewe Individual 26 Lcd Operating Instructions

31 -  
Operating additional equipment
Search for and store the station of the video recorder (if no Euro-AV 
cable is available)
Switch on the test station on the VCR or insert a recorded tape and start play-
back. In some video recorders the station must be switched on by activating the 
modulator.
Then call the AV selection on the TV set with 0 AV. Select the menu item 
“VIDEO” in the AV selection and call using OK.
To prevent “normal” TV stations being found in the search, pull out the antenna 
plug...

 - 32
Operating additional equipment
Timer recording with video or DVD recorder
You can programme timer recordings on the TV set. Programming can be done 
with the EPG programme guide (not with DVB-T in GB), teletext or manually. 
Call the “Timer list” menu with the 
 button and press the red coloured 
key for the “Recording wizard”. Select whether you want to programme the 
recording via EPG, teletext or manually. You also have the option to programme 
recordings directly from the EPG programme guide or...

33 -  
Operating additional equipment
Audio output “AUDIO DIGITAL OUT“
The digital audio signal is applied at the “AUDIO DIGITAL OUT” socket of the TV. 
For example, you can connect an external digital audio amplifier or the Loewe 
Auro system here.
An analogue audio signal from the TV set or another sound source which is 
received at one of the Euro-AV sockets of the TV set is converted into a digital 
signal (PCM) and output at the “AUDIO DIGITAL OUT“ socket. Conversion from 
external analogue AV...

 - 34
PREOUT 
L C  R  L  L 
SL LFE SR  R R TO TV   AUX1 IN DIGITAL 
IN 
DIGITAL 
OUT 
TV 
L-LINK  12V / 15mA EXT  AUX OUT  AUX 2  
 
ON 
Line IN  Power OUT 
OFF 
Bass Intensity 
Center to 
System connector 
230V~50/60Hz 
Surr. 
Front 
Right 
Surr. 
Front Subw. Left 
Right Center Left 
Slave 
Master 
R 
R  L 
C L 
Phase  Min. Max. 
TV 
Sat 0 180 
Loewe  
Individual Sound  Loewe Flat-TV  
Loewe  
Auro 
COMPONENT 
VIDEO OUT 
Y 
Pb 
Pr 
 
AV2-SCART 
SERVICE  CENTER 
DIGITAL OUT  COMPONENT  IN 
L 
SL 
SR 
R...

35 -  
Operating additional equipment
Connecting other audio amplifiers or active 
speakers
In the connection wizard, select “HiFi/AV amplifier” under “Equipment selec-
tion: audio component”. The connection wizard allows configuration of different 
audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with 
different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the 
operating instructions for the audio amplifier to be connected.
Select “Digital“ under “Audio...

 - 36
Operating additional equipment
HDMI (DVI) connection
The HDMI connection (High Definition Multimedia Interface) 
allows digital picture and sound transmission via a connecting 
cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD. 
The digital picture and sound data are transmitted without data 
compression and therefore lose none of their quality. In the equipment con-
nected, no analogue/digital conversion is necessary, which might also have lead 
to losses in quality.
DVI signals can be also...

37 -  
Operating additional equipment
Sound from PC or Set Top Box
Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN 
L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers.
If you have connected a digital external audio amplifier, you can select the 
digital audio signal in the connection wizard (TV menu - Connections - New 
devices/modifications) and assign it to the VGA/XGA socket. You can make the 
other settings for the audio amplifier as described for...

 - 38
Operating additional equipment
Set remote control
The specified key combination must be pressed (approx. 5 s) until one of the LEDs  
flashes twice. The remote control can be set for the different devices as follows:
Device    Hot keys
Loewe TV (Chassis L2650) 
 +  
Loewe Centros 11x2   
 + 
Loewe Centros 12x2/21x2  +    Factory setting
Loewe ViewVision DR+ 
 + 
Loewe ViewVision 8106 H  + 
Loewe Auro 2216 PS / 8116 DT  +  
Loewe Xemix 6222 PS  
 + 
Operate Loewe DVD player and recorder
Use the...

39 -  
Operating additional equipment
Rotating the TV set
Individual / Individual Selection sets have a connection for a rotating stand con-
trol. If the TV set is mounted on a motor unit, you can use the remote control to 
adjust it to your seating location accordingly.
Rotate the TV set when no menu or PIP is being displayed.
Note: Make sure there are no objects in the TV’s area of rotation that might 
obstruct the rotation or be knocked down due to the rotating motion.
Setting the range of rotation...

 - 40
What to do, if ...
Problem Possible cause Remedy
The “Recording” menu point is not displayed in the 
TV menu.No video or DVD recorder logged in. Log in the video or DVD recorder in the connection 
wizard and connect the device.
“Connections” cannot be called in the TV menu 
(deactivated).A time recording is in progress. Wait until the timer recording has ended or delete the 
timer.
The control of the Loewe video recorder and the 
timer do not work or do not work properly.a)  The Digital Link...