Loewe Connect 37 Media Operating Instructions

41 -
Other settings
Parental lock
You can select and set various security options to prevent unauthorised use 
of the TV set and to protect your children from unsuitable programmes.
Defining the access code (PIN)
Call TV menu.
 Select Settings,
 go to the menu line below.
 Select Parental lock,
 go to the menu line below.
   Define a four digit access code (PIN) the first time 
you open it. The numbers appear in plain text. Note 
the access code (PIN) well. 
 OK  Confirm the access code (PIN)....

- 42
Timer functions
This menu offers you convenient alarm services. Programmed alarms are 
also active when the TV set has been switched off to standby.
If the TV set switches on from the standby mode by alarm, a screen 
message appears. If this is not confirmed within 5 minutes with the OK 
button, the TV switches back off automatically for safety reasons.
The TV set can also be switched off automatically at certain times. A screen 
warning appears one minute before automatic switch off. The automatic...

43 -
Other settings
On-screen displays
You can select different settings in this menu which affect the on-screen 
displays. 
Call On-screen displays
Call TV menu.
 Select Settings,
 go to the menu line below.
 Select Miscellaneous,
 go to the menu line below.
 Select On-screen displays,
 go to the menu line below.
  Select the desired setting. 
Explanations of setting possibilities in the On-screen displays menu:
Here you set the duration of the display, e.g. for the 
volume or the...

- 44
Select the equipment you want to connect or remove 
equipment you no longer use in the AV equipment 
selection.
Select equipment/connection.
Yellow button: Connect/disconnect equipment.
A Camcorder / camera is connected to the TV set addition-
ally in the following example.
 OK Proceed.
The connection diagram is displayed again. Connect the 
equipment to the corresponding connections of the TV 
set as shown in the connection diagram. 
➠  The accessory equipment should be connected to the 
TV set...

45 -
  Select the signal types of the individual devices one 
after another where necessary.
   Normally you should leave the setting on Automatic 
CVBS/YC (e.g. for DVD player/recorder) or Autom.-
VHS/SVHS (e.g. VCR), otherwise select the suitable 
signal type.
 OK Proceed.
  Select yes or no.
   If playback is started on a device connected to AV1 
or AV2, the TV switches immediately to the appro-
priate AV input when yes is set.
   When playing devices with Digital Link Plus, the 
appropriate AV...

- 46
Operating additional equipment
Devices to the connections AV1/AV2/AVS
Accessory equipment such as DVD players, video and DVD recorders 
etc. can be connected to the TV set at the Euro-AV sockets AV1 and AV2 
(see pages 5 and 6). 
The AV input AVS (see pages 5 and 6) offers the possibility of connecting 
a digital camera or a camcorder for example.
➠  All devices at the AV inputs must be registered in in the connection 
wizard (see page 44 onwards).
The connection designations vary according to the...

47 -
Connecting Camcorder/camera
➠  Camcorder/camera is registered with the connection 
wizard.
Switch off all equipment before connecting.
Connect the AV output of the camcorder to the audio 
input sockets L/R (white/red) and the S-VHS connection 
of the AVS sockets of the TV set. 
Use the AV cable enclosed with the camcorder for this. 
Some camcorders only supply an FBAS signal instead of 
an S-VHS signal at the AV output. In this case use the AVS 
video input (yellow).
➠  The side HDMI 3 socket is...

- 48
Operating additional equipment
Devices to the HDMI (DVI) connections
The HDMI connections (High Definition Multimedia Interface) allow the 
transmission of digital video and audio signals from a player, e.g. DVD 
player, DVD recorder, Blu-ray player, game console or Set-Top-Box via a 
single cable.
The digital video and audio data are transmitted without data compres-
sion digitally and therefore lose none of their quality. 
A maximum of five devices can be connected in cascade to every HDMI...

49 -
Operating additional equipment
Devices to the PC IN connection
You can connect a PC to the PC IN socket for example and thus use the 
TV screen as a monitor.
➠  When connecting a PC or accessory equipment to the PC IN socket 
of the TV set, set one of the following screen resolutions on the PC / 
accessory equipment first.
800 x 600 60 Hz(SVGA)1024 x 768 60 Hz(XGA)
1280 x 1024 60 Hz(SXGA)1360 x 768 60 Hz(WXGA)
720 x 576i(SDTV)720 x 480i(SDTV)
720 x 576p(SDTV)720 x 480p(SDTV)
1280 x 720p(HDTV)1920 x...

- 50
Operating additional equipment
Devices to the Component IN connection
DVD players/recorders or a Set-Top-Box with Component Video con-
nections can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD-
COMPONENT) of the TV set instead of to the EURO-AV sockets.
The connecting cable with three cinch plugs each transfers the picture 
information with a better quality than a EURO-AV cable. You need another 
cable for the sound transmission.
Connecting the device
➠  Device to COMP. IN is registered...