Loewe Connect 26 Operating Instructions

31 -
Change position of the PIP small picture
➠  Nothing else is displayed on the screen apart from the 
status line.
Move the PIP into a corner of the screen.
The position of the small picture can also be selected 
under Position in the PIP menu.
Switch to iPIP / Standard PIP function
➠ PIP menu open.
  Select Functions,
 go to the menu line below.
 Select iPIP or Standard PIP.
    In iPIP the frame around the PIP picture is orange.
iPIP operation:
When the iPIP function is set, the currently...

- 32
Adjusting the programme list
➠  The selection is at the top of the specifications,
if not, press the blue button.
 Select Date, Time, Stations or Topics.
 Select defaults within the respective line.
 Example  If you are searching for the next news, select today’s date, 
17:00 for example for the time, all for station and News 
for topics. Then you get a list of all news programmes 
from 17.00 h onwards in the programme list below it. 
    The type of list of programmes in the programme list...

33 -
In the station selection you can determine for which 
station in the programme guide information is to be 
displayed. Only stations with  are shown in the EPG. 
With the coloured buttons you can select or remove sta-
tions or only select the stations from the favourites lists.
Because of the large number of receivable DVB-S stations 
you should restrict the station selection. This reduces the 
data entry time and increases the clarity in the EPG.
Marking the stations according to reception ranges:

- 34
Additional page selection possibilities
1st possibility:
Call overview page 100.
2nd possibility:
Directly enter the page number.
3rd possibility:
➠ The page includes 3-digit page numbers.
 Mark desired page number.
 OK Call the page.
4th possibility:
➠  The page consists of several sub-pages indicated by the 
selection option on the last line.
  Page through sub-pages.
Call TOP table
➠  The table can only be called for stations with the TOP 
operating system.
 OK Call TOP table.
 Mark topic...

35 -
Programming timer recordings via Teletext
➠  Teletext is started,
if not, press the TEXT button.
Call the programme pages of the current station.
Green button: Go to the appropriate page.
 Select the desired programme,
 OK  to programme the recording.
Change the appropriate recording data in the following 
menu Timer data (see also page 54, "The direct way to 
record“).
  OK Confirm.
Changing teletext station
You can change the teletext provider independently of the station you 
are...

- 36
Teletext
Digital teletext (MHEG-5)
In the UK or Ireland, the teletext for DVB-T stations is transmitted as per 
the MHEG-5 standard. It contains text, graphics, functions and links.
➠ Only for TV sets with MHEG-5 software.
➠ At the moment only available in United Kingdom and Ireland.
➠ 
Digital teletext is not available when DVB subtitles are being displayed.
The operation of these menus depends on the particular 
provider. Normally after a station is changed, the provider 
broadcasting the digital...

37 -
Audio adjustment
Call Sound adjustment.
Other settings as for TV mode (see page 20).
Switching the screen on/off
Red button: Switch off the screen.
The LED display on the TV set (see page 4) changes from 
green to orange.
Switch on the screen with the remote control:
Red button, RADIO button or OK button (station list is 
opened).
Switch on the screen on the TV set:
Press R on the TV set operating ring.
Radio menu
In the Radio menu, you can set the sound, search for and store radio 
stations...

- 38
If you want to change the update settings:
 Select Change update settings,
 OK  the wizard polls the update settings.
➠  The selection options depend on the antenna cables 
connected at the initial installation (see page 12).
USB only
New software is searched for via USB.
USB and DVB-T
New software is searched for first via USB then via DVB-T 
(digital terrestrial transmission).
USB and DVB-C
New software is searched for first via USB then via DVB-C 
(digital cable transmission).
USB and...

39 -
DVB
If you have adapted the update settings:
 OKproceed.
 Select Start update,
 OKstart update procedure.
 Select software type: 
    TV base software or 
  DVB software,
 OKstart search.
If a new software version is available after the search, the 
following screen message appears.
Loading new software
Select update option:
Load new software now 
Load new software after switch off to standby 
(update after switching off) 
Keep current software (no update desired).
 OKProceed or exit...

- 40
DVB
Conditional Access module (CA module)
In order to be able to receive digital stations, a Conditional Access module 
(CA module) and a Smart Card must be inserted in the CI slot of your TV 
set (see pages 5 and 6). 
The CA module and the Smart Card are not part of the TV set's scope 
of delivery. They are usually available from your dealer. 
Loewe provides no guarantee for the functioning of the CA module.
Inserting the smart card into the CA module
Push the Smart Card into the CA module as...