Loewe Art 47 Sl Operating Instructions

51 -
Operating additional equipment
Concealed installation of HDMI devices
Digital Link HD (HDMI CEC)
The Digital Link HD (HDMI CEC) system operation allows Loewe television 
sets to transmit the remote control signals via the HDMI connection of a 
TV set to compatible HDMI devices, such as e.g. Loewe AudioVision. You 
can therefore set up a concealed CEC capable HDMI device.
For this, first assign the HDMI CEC function with Code 22 to the required 
device button (REC, DVD or AUDIO) as described on page...

- 52
Operating additional equipment
Devices to the PC IN connection
You can connect a PC to the PC IN socket for example and thus use the 
TV screen as a monitor.
➠  When connecting a PC or accessory equipment to the PC IN socket 
of the TV set, set one of the following screen resolutions on the PC / 
accessory equipment first.
800 x 600 60 Hz(SVGA)1024 x 768 60 Hz(XGA)
1280 x 1024 60 Hz(SXGA)1360 x 768 60 Hz(WXGA)
720 x 576i(SDTV)720 x 480i(SDTV)
720 x 576p(SDTV)720 x 480p(SDTV)
1280 x 720p(HDTV)1920 x...

53 -
Operating additional equipment
Devices to the Component IN connection
DVD players/recorders or a Set-Top-Box with Component Video con-
nections can also be connected to the Cb/Pb Cr/Pr Y sockets (SD/HD-
COMPONENT) of the TV set instead of to the EURO-AV sockets.
The connecting cable with three cinch plugs each transfers the picture 
information with a better quality than a EURO-AV cable. You need another 
cable for the sound transmission.
Connecting the device
➠  Device to COMP. IN is registered...

- 54
Operating additional equipment
Sound components wizard
The sound components wizard helps you to configure the components 
used to play the TV sound.
The TV speakers alone or with active subwoofer, active speakers, analogue 
or digital HiFi/AV amplifier or the Loewe Individual Sound Projector can 
be configured depending on what you want to use. 
The sound components wizard is preset to playback via TV speakers at 
the factory.
If a Loewe Preceiver Auro with link cable has been connected to the 
TV...

55 -
Connecting audio amplifiers
The sound component wizard permits configuration of different audio 
amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with 
different digital audio formats (Dolby Digital, dts, MPEG, and stereo/PCM). 
See the operating manual for the audio amplifier for more information.
Call TV menu.
 Select Connections,
   go to the menu line below.
 Select Sound components.
 OK  calls the sound components wizard.
 Mark the HiFi/AV amplifier or TV...

- 56
Assignment of the digital audio input
In order to be able to hear the digital sound of an external device con-
nected to an AV input, an AV input can be assigned to the digital audio 
input socket AUDIO DIGITAL IN. When switching to this AV input, the 
digital audio signal applied to the AUDIO DIGITAL IN input is passed on 
to the upgradable integrated Dolby Digital decoder and the digital audio 
output socket AUDIO DIGITAL OUT. You will then hear the digital sound 
of the assigned AV input instead...

57 -
Operating additional equipment
The direct way to record
You can programme timer recordings for Digital Recorder or connected 
recorders available according to the equipment on the TV set. The record-
ing wizard is integrated at several places for programming a recording. 
You will find further information about recording with Digital Recorder 
in a separate user guide.
Programming a timer recording with the EPG
➠  You are in EPG mode; if not, press the EPG button.
 Mark the desired broadcast....

- 58
Operating additional equipment
Programming the timer with the timer overview
All programmed recordings, marked programmes and copy orders (1 are 
listed in the timer overview. You can also programme new recordings, 
mark other programmes and copy 
(1 pre-recorded programmes from the 
DR archive to an external recorder with the timer overview.
Call Timer list.
Red button:  New entry (see right hand column).
Green button: Change recording.
Yellow button: Delete recording.
Blue button: Delete memo....

59 -
Operating additional equipment
Timer recording with external devices
➠  It is not possible to record HDTV broadcasts with external devices. Use 
the internal Digital Recorder for this if it is installed.
Recorder with Digital Link Plus
If you use an externally connected recorder with Digital Link Plus or a 
similar system, the TV set and connected recorder exchange data (e.g. 
compare station lists TV set/recorder or timer data of analogue stations). 
Please consult the operating manual of your...

- 60
PhotoViewer
You can view photos in the standard JPEG format stored on a USB stick or 
a memory card in a card reader. You can also collect photos in a slide show.
Connecting
➠  Certain USB memory media may not be supported by this set under 
some circumstances.
Plug a card reader (via a USB cable) or a USB stick into the USB port on 
the TV set (see pages 5 to 7).
Use a USB extension cable (see Accessories on page 73) for the USB stick 
if the USB socket is difficult to access (e.g. wall mounting)...