Home > Llama > Firearms > Llama Max I Cal. .45 L/F Instructions Manual

Llama Max I Cal. .45 L/F Instructions Manual

Add to Favourites
    Download as PDF

    View the Llama Max I Cal. .45 L/F Instructions Manual for free. All the Llama manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Model Max-I Cal. .45 L/F PARTS LIST – INSTRUCTIONS FOR USE – MAINTENANCE SPECIFICATIONS Caliber…………………………. .45 Number of shots…………………7 Length overall…………………...8 ½ inches. Weight (unloaded)………………33 oz. Height……………………………5 1/3 inches Sights…………………………….Adjust. sight for windage. Stocks…………………………….Neoprene Finish…………………………….. Bright blue, chromed, engraved or gold damascened. Ammunition……………………….45 FABRINOR – P.O. Box 290- 01080 VITORIA (Spain) IMPORTANT When...
    Page 2 PARTS LIST A 034 Magazine Catch lock A 054 Main spring cap pin B 720 Firing pin safety spring D 110 Extractor spring D 119 Hammer pin D 120 Hammer strut D 121 Hammer strut pin D 122 Sear D 123 Sear pin D 124 Disconnector D 125 Trigger D 127 Safety lock D 128 Sear spring D 129 Main spring housing D 130 Main spring cap D 131 Main spring D 138 Recoil spring guide D 139 Plug D 142 Firing pin spring D 143 Firing pin firing pin retainer D 146 Magazine catch D 152 Plunger Tube D 153...
    Page 3 DISASSEMBLY OF THE LLAMA MODEL MAX-I CAL. .45 L/F The LLAMA pistol is quite easily taken apart. The parts mentioned in the following instructions refer to those described and illustrated in the schematic. 1. Press the magazine catch (D 146) with your left thumb and take out the magazine (T 185). 2. Press the plug (D 139), the grooved face of which can be seen under the mouth of the barrel and, at the same time, turn the barrel bushing (T 190) towards the right hand side of the frame (T 600),...
    Page 4 OPERATION OF THE LLAMA MODEL MAX-I CAL. .45 L/F TO LOAD: depress the magazine catch, which is located immediately behind the trigger. This will unlock the magazine. To fill the magazine, place the cartridges so that the bullet ends are positioned over the leading edge of the follower. Fill the magazine to capacity. Now take the loaded magazine and slide it back into the lodging frame. When the magazine is pressed firmly into position, you should hear a distinct “click”, which indicates that...
    Start reading Llama Max I Cal. .45 L/F Instructions Manual

    Related Manuals for Llama Max I Cal. .45 L/F Instructions Manual

    All Llama manuals