Linksys Router WRT54GS User Manual

							
Chapter 3Advanced Configuration

W

reless-G Broadband Router w

th SpeedBooster
Opt
 m  ze  Gam  ng  Appl  cat  ons  Select  this  to 
automatically  allow  common  game  application  ports 
to  have  a  higher  priority.  These  games  include,  but  are 
not  limited  to: Counter-Strike, Half-Life, Age  of  Empires, 
Everquest, Quake2/Quake3  and Diablo  II,  etc.  The  default 
setting is unselected.
Appl cat  on  Name  Enter  the  name  you  wish  to  give  the 
application in the Application Name field.
Pr or  ty  Select H  gh  or Low  to  assign  priority  to  the 
application.
Spec f  c  Port  #  Enter  the  port  number  for  the 
application.
Wireless QoS
WMM  Support Wi-Fi  Multimedia  (WMM),  formerly 
known  as  Wireless  Multimedia  Extensions  (WME),  is 
a  Wi-Fi  Alliance  certified  feature,  based  on  the  IEEE 
802.11e  standard.  This  feature  provides  QoS  to  wireless 
networks.  It  is  especially  suitable  for  voice,  music  and 
video applications; for example, Voice over IP (VoIP), video 
streaming,  and  interactive  gaming.  If  you  have  other 
devices  on  your  wireless  network  that  support  WMM, 
select Enabled. Otherwise, keep the default,  D  sabled.
No Acknowledgement This feature prevents the Router 
from re-sending data if an error occurs. To use this feature, 
select Enabled.  Otherwise,  keep  the  default  setting, 
D

sabled
.
Click the  Save Sett  ngs button to apply your changes, or 
click Cancel Changes to cancel your changes. 
Administration > Management
Th Administration  >  Management  screen  allows  the 
network’s  administrator  to  manage  specific  Router 
functions for access and security.
Administration > Management
Router Password
Local Router Access
Router Password Enter a new Password for the Router.
Re-enter  to  conf  rm  Enter  the  Password  again  to 
confirm.
Web Access
Access  Server HTTP  (HyperText  Transport  Protocol)  is 
the  communications  protocol  used  to  connect  to  servers 
on the World Wide Web. HTTPS uses SSL (Secured Socket 
Layer)  to  encrypt  data  transmitted  for  higher  security. 
Select HTTP or HTTPS. 
W reless  Access  Web  If  you  are  using  the  Router  in 
a  public  domain  where  you  are  giving  wireless  access 
to  your  guests,  you  can  disable  wireless  access  to  the 
Router’s web-based utility. You will only be able to access 
the web-based utility via a wired connection if you disable 
the setting. Select Enable to enable wireless access to the 
Router’s  web-based  utility,  or  select  D  sable  to  disable 
wireless access to the utility.
Remote Router Access
Remote  Management To  access  the  Router  remotely, 
from outside the network, select Enable. 
Management  Port Enter  the  port  number  that  will  be 
open to outside access. You will need to enter the Router’s 
password when accessing the Router this way, as usual.
Use HTTPS To require the use of HTTPS for remote access, 
select this feature.
UPnP
UPnP Keep  the  default, Enable  to  enable  UPnP  feature; 
otherwise, select  D  sable.
Click the Save Sett  ngs button to apply your changes, or 
click Cancel Changes to cancel your changes. 
Administration > Log
The  Router  can  keep  logs  of  all  traffic  for  your  Internet 
connection.
Administration > Log    
						

							
Chapter 3Advanced Configuration
8
W

reless-G Broadband Router w

th SpeedBooster
Log
Log
 To disable the Log function, keep the default setting, 
D

sable
. To monitor traffic between the network and the 
Internet, select Enable.
When  you  wish  to  view  the  logs,  click  the  Incom  ng  Log 
or Outgo  ng  Log button,  depending  on  which  you  wish 
to view.
Click the Save Sett  ngs button to apply your changes, or 
click Cancel Changes to cancel your changes. 
Administration > Diagnostics
The  diagnostic  tests  (Ping  and  Traceroute)  allow  you  to 
check the connections of your network components.
Administration > Diagnostics
Ping Test
P ng  The  Ping  test  will  check  the  status  of  a  connection. 
Click  the  P  ng  button  to  open  the Ping  Test  screen.  Enter 
the address of the PC whose connection you wish to test 
and  how  many  times  you  wish  to  test  it.  Then,  click  the 
P
 ng
 button. The Ping Test screen will show if the test was 
successful.  To  stop  the  test,  click  the Stop  button.  Click 
the Clear  Log  button  to  clear  the  screen.  Click  the Close 
button to return to the Diagnostics screen.
The Ping Test
Traceroute Test
Traceroute  To test the performance of a connection, click 
the Traceroute button. Enter the address of the PC whose 
connection  you  wish  to  test  and  click  the Traceroute 
button. The Traceroute Test screen will show if the test was 
successful.  To  stop  the  test,  click  the Stop  button.  Click 
the Clear  Log  button  to  clear  the  screen.  Click  the Close 
button to return to the Diagnostics screen.
The Traceroute Test
Administration > Factory Defaults
The Administration  >  Factory  Defaults  screen  allows  you 
to restore the Router’s configuration to its factory default 
settings. 
Factory Defaults
Restore  Factory  Defaults  To  reset  the  Router’s  settings 
to  the  default  values,  select Yes,  and  then  click  the Save 
Sett

ngs
 button. Any settings you have saved will be lost 
when the default settings are restored.
Administration > Factory Defaults      
						

							
Chapter 3Advanced Configuration
9
W

reless-G Broadband Router w

th SpeedBooster
Administration > Firmware Upgrade
The Administration  >  Firmware  Upgrade  screen  allows  you 
to  upgrade  the  Router’s  firmware.  Do  not  upgrade  the 
firmware  unless  you  are  experiencing  problems  with  the 
Router or the new firmware has a feature you want to use. 
Administration > Firmware Upgrade
Before  upgrading  the  firmware,  download  the  Router’s 
firmware  upgrade  file  from  the  Linksys  website,  www.
linksys.com. Then extract the file.
Upgrade Firmware
Please  select  a  f
 le  to  upgrade  Click  the Browse 
button  and  select  the  extracted  firmware  upgrade  file. 
Then  click  the Upgrade  button  and  follow  the  on-screen 
instructions.
Administration > Config Management
This  screen  is  used  to  back  up  or  restore  the  Router’s 
configuration file.
Administration > Config Management
Backup Configuration
To back up the Router’s configuration file, click the Backup 
button. Then follow the on-screen instructions.
Restore Configuration
Please  select  a  f le  to  restore  Click  the Browse  button 
and  select  the  configuration  file.  Then  click  the Restore 
button.
Status > Router
The Status  >  Router  screen  displays  the  Router’s  current 
status.
Administration > Factory Defaults
Router Information
F rmware Vers  on  This is the Router’s current firmware.
Current  T me  This  shows  the  time,  as  you  set  on  the 
Setup tab.
MAC  Address This  is  the  Router’s  MAC  Address,  as  seen 
by your ISP.
Router  Name  This  is  the  specific  name  for  the  Router, 
which you set on the Setup tab.
Host Name If required by your ISP, this would have been 
entered on the Setup tab.
Doma n  Name  If  required  by  your  ISP,  this  would  have 
been entered on the Setup tab.
Internet
Configuration Type
This  section  shows  the  current  network  information 
stored in the Router. The information varies depending on 
the Internet connection type selected on the Setup > Basic 
Setup screen.
Click  the Refresh  button  to  update  the  on-screen 
information.     
						

							
Chapter 3Advanced Configuration
20
W

reless-G Broadband Router w

th SpeedBooster
Status > Local Network
The Status  >  Local  Network  screen  displays  the  status  of 
your network.
Status > Local Network
Local Network
MAC  Address
 This  is  the  Router’s  MAC  Address,  as  seen 
on your local, Ethernet network.
IP  Address This  shows  the  Router’s  IP  Address,  as  it 
appears on your local, Ethernet network.
Subnet Mask  This shows the current subnet mask being 
configured for your local network.
DHCP Server If you are using the Router as a DHCP server, 
that will be displayed here.
Start  IP  Address  For  the  range  of  IP  Addresses  used  by 
devices on your local, Ethernet network, the beginning of 
that range is shown here.
End  IP  Address For  the  range  of  IP  Addresses  used  by 
devices  on  your  local,  Ethernet  network,  the  end  of  that 
range is shown here.
DHCP  Cl ents  Table  Clicking  this  button  will  open  a 
screen to show you which PCs are utilizing the Router as a 
DHCP  server. You  can  delete  PCs  from  that  list,  and  sever 
their connections, by checking a Delete box and clicking 
the Delete button.
DHCP Clients Table
Click  the Refresh  button  to  update  the  on-screen 
information.
Status > Wireless
The Status  >  Wireless  screen  displays  the  status  of  your 
wireless network.
Status > Wireless
Wireless
MAC  Address This  is  the  Router’s  MAC  Address,  as  seen 
on your local, wireless network.
Mode As  selected  from  the Wireless  >  Basic  Wireless 
Settings screen, this displays the wireless mode (Mixed, G-
Only, or Disabled) used by the network.
SSID As  entered  on  the Wireless  >  Basic  Wireless  Settings 
screen, this displays the wireless network name or SSID.
DHCP  Server  The  status  of  the  DHCP  server  function  is 
displayed here.
Channel As  entered  on  the Wireless  >  Basic  Wireless 
Settings  screen,  this  displays  the  channel  on  which  your 
wireless network is broadcasting.
Encrypt on  Funct  on  As  selected  on  the Wireless  > 
Wireless  Security  screen,  this  displays  the  status  of  the 
Router’s wireless security.
Click  the Refresh  button  to  update  the  on-screen 
information.     
						

							
Appendix ATroubleshooting
2
W

reless-G Broadband Router w

th SpeedBooster
Append
 x A:  
Troubleshoot  ng
Your computer cannot connect to the Internet. 
Follow these instructions until your computer can connect 
to the Internet:
Make  sure  that  the  Router  is  powered  on. The  Power 
LED should be green and not flashing.
If  the  Power  LED  is  flashing,  then  power  off  all  of 
your  network  devices,  including  the  modem,  Router, 
and  computers.  Then  power  on  each  device  in  the 
following order:
Cable or DSL modem
Router
Computer
Check  the  cable  connections.  The  computer  should 
be  connected  to  one  of  the  ports  numbered  1-4  on 
the Router, and the modem must be connected to the 
Internet port on the Router.
The modem does not have an Ethernet port.
The  modem  is  a  dial-up  modem  for  traditional  dial-up 
service. To  use  the  Router,  you  need  a  cable/DSL  modem 
and high-speed Internet connection.
You  cannot  use  the  DSL  service  to  connect  manually  to 
the Internet.
After  you  have  installed  the  Router,  it  will  automatically 
connect to your Internet Service Provider (ISP), so you no 
longer need to connect manually.
The  DSL  telephone  line  does  not  fit  into  the  Router’s 
Internet port.
The  Router  does  not  replace  your  modem. You  still  need 
your  DSL  modem  in  order  to  use  the  Router.  Connect 
the  telephone  line  to  the  DSL  modem,  insert  the  setup 
CD  into  your  computer,  and  then  follow  the  on - screen 
instructions.
•
•
1.
2.
3.
•
When  you  double-click  the  web  browser,  you  are 
prompted for a username and password. If you want to 
get rid of the prompt, follow these instructions.
Launch the web browser and perform the following steps 
(these steps are specific to Internet Explorer but are similar 
for other browsers):
Select Tools > Internet Opt  ons. 
Click the Connect  ons tab.
Select Never d  al a connect  on. 
Click OK.
The  Router  does  not  have  a  coaxial  port  for  the  cable 
connection.
The  Router  does  not  replace  your  modem. You  still  need 
your cable modem in order to use the Router. Connect your 
cable  connection  to  the  cable  modem,  insert  the  setup 
CD  into  your  computer,  and  then  follow  the  on
- screen 
instructions.
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the same 
on both the computer and the Router. If you have enabled 
wireless  security,  then  make  sure  the  same  security 
method  and  key  are  used  by  both  the  computer  and  the 
Router.
You need to modify the settings on the Router.
Open the web browser (for example, Internet Explorer or 
Firefox),  and  enter  the  Router’s  IP  address  in  the  address 
field  (the  default  IP  address  is  92.  68.  . ).  When 
prompted,  leave  the User  name  field  blank  and  enter  the 
password  to  the  Router  (the  default  is adm  n).  Click  the 
appropriate tab to change the settings.
WEB: If your questions are not addressed here, 
refer to the Linksys website, www.l  nksys.com.
1.
2.
3.
4.   
						

							
Appendix BSpecifications
22
W

reless-G Broadband Router w

th SpeedBooster
Append
 x B:  
Spec

f

cat

ons
Model   WRT54GS
Standards   IEEE 802.3, IEEE 802.3u,
 
 
IEEE 802.11g, IEEE 802.11b
Channels
 
11 Channels (US, Canada)
 
 
13 Channels (Europe, Japan)
Ports
 
Internet: One 10/100 RJ-45 Port
 
 
LAN: Four 10/100 RJ-45 Switched
 
 
Ports
 
 
One Power Port
Button
 
One Reset Button
 
 
One SecureEasySetup Button
Cabling Type
 
CAT5
LEDs
 
Power, DMZ, WLAN, LAN (1-4), 
 
 
Internet, SecureEasySetup
RF Power Output
 
18
 
dBm 
UPnP able/cert
 
Able
Security features
 
Stateful Packet Inspection (SPI)
 
 
Firewall, Internet Policy
Wireless Security
 
Wi-Fi Protected Access™2 (WPA2),
 
 
WEP, Wireless MAC Filtering
Env  ronmental
Dimensions   7.32" x 1.89" x 6.06" 
 
(186 x 48 x 154 mm)
Weight
 
13.6 oz (385 g)
Power
 
External, 12V DC, 0.5A
Certifications
 
FCC, IC-03, CE, Wi-Fi (802.11b,
 
 
802.11g), WPA2, WMM
Operating Temp.
 
32 to 104ºF (0 to 40ºC)
Storage Temp.
 
-4 to 158ºF (-20 to 70ºC)
Operating Humidity
 
10 to 85%, Noncondensing
Storage Humidity
 
5 to 90%, Noncondensing  
						

							
Appendix CWarranty and Regulatory Information
23
W

reless-G Broadband Router w

th SpeedBooster
Append
 x C:  
Warranty and Regulatory 
Informat
 on
Limited Warranty
Linksys  warrants  to  You  that,  for  a  period  of  one  year 
(the  "Warranty  Period"),  your  Linksys  Product  will  be 
substantially free of defects in materials and workmanship 
under  normal  use.  Your  exclusive  remedy  and  Linksys’ 
entire  liability  under  this  warranty  will  be  for  Linksys  at 
its  option  to  repair  or  replace  the  Product  or  refund Your 
purchase  price  less  any  rebates.  This  limited  warranty 
extends only to the original purchaser. 
If  the  Product  proves  defective  during  the  Warranty 
Period  call  Linksys  Technical  Support  in  order  to  obtain 
a  Return  Authorization  Number,  if  applicable.  BE  SURE 
TO  HAVE  YOUR  PROOF  OF  PURCHASE  ON  HAND  WHEN 
CALLING. If You are requested to return the Product, mark 
the  Return  Authorization  Number  clearly  on  the  outside 
of  the  package  and  include  a  copy  of  your  original  proof 
of  purchase.  RETURN  REQUESTS  CANNOT  BE  PROCESSED 
WITHOUT  PROOF  OF  PURCHASE.  You  are  responsible 
for  shipping  defective  Products  to  Linksys.  Linksys  pays 
for  UPS  Ground  shipping  from  Linksys  back  to  You  only. 
Customers located outside of the United States of America 
and Canada are responsible for all shipping and handling 
charges. 
ALL  IMPLIED  WARRANTIES  AND  CONDITIONS  OF 
MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR 
PURPOSE  ARE  LIMITED  TO  THE  DURATION  OF 
THE  WARRANTY  PERIOD.  ALL  OTHER  EXPRESS  OR 
IMPLIED  CONDITIONS,  REPRESENTATIONS  AND 
WARRANTIES,  INCLUDING  ANY  IMPLIED  WARRANTY  OF 
NON- INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions 
do not allow limitations on how long an implied warranty 
lasts,  so  the  above  limitation  may  not  apply  to  You.  This 
warranty gives You specific legal rights, and You may also 
have other rights which vary by jurisdiction.
This  warranty  does  not  apply  if  the  Product  (a)  has  been 
altered,  except  by  Linksys,  (b)  has  not  been  installed, 
operated,  repaired,  or  maintained  in  accordance  with 
instructions supplied by Linksys, or (c) has been subjected 
to  abnormal  physical  or  electrical  stress,  misuse, 
negligence, or accident. In addition, due to the continual 
development  of  new  techniques  for  intruding  upon  and 
attacking  networks,  Linksys  does  not  warrant  that  the 
Product will be free of vulnerability to intrusion or attack.
TO  THE  EXTENT  NOT  PROHIBITED  BY  LAW,  IN  NO  EVENT 
WILL  LINKSYS  BE  LIABLE  FOR  ANY  LOST  DATA,  REVENUE 
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, 
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE 
THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING 
OUT  OF  OR  RELATED  TO  THE  USE  OF  OR  INABILITY  TO 
USE  THE  PRODUCT  (INCLUDING  ANY  SOFTWARE),  EVEN 
IF  LINKSYS  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF 
SUCH  DAMAGES.  IN  NO  EVENT  WILL  LINKSYS’  LIABILITY 
EXCEED  THE  AMOUNT  PAID  BY  YOU  FOR  THE  PRODUCT. 
The foregoing limitations will apply even if any warranty or 
remedy provided under this Agreement fails of its essential 
purpose. Some jurisdictions do not allow the exclusion or 
limitation of incidental or consequential damages, so the 
above limitation or exclusion may not apply to You.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, 
CA 92623.  
						

							
Appendix CWarranty and Regulatory Information
24
W

reless-G Broadband Router w

th SpeedBooster
Wireless Disclaimer
The  maximum  performance  for  wireless  is  derived  from 
IEEE  Standard  802.11  specifications.  Actual  performance 
can  vary,  including  lower  wireless  network  capacity, 
data  throughput  rate,  range  and  coverage.  Performance 
depends  on  many  factors,  conditions  and  variables, 
including  distance  from  the  access  point,  volume  of 
network  traffic,  building  materials  and  construction, 
operating  system  used,  interference  and  other  adverse 
conditions.
FCC Statement
This  product  has  been  tested  and  complies  with  the 
specifications for a Class B digital device, pursuant to Part 
15  of  the  FCC  Rules. These  limits  are  designed  to  provide 
reasonable  protection  against  harmful  interference  in 
a  residential  installation.  This  equipment  generates, 
uses,  and  can  radiate  radio  frequency  energy  and,  if  not 
installed  and  used  according  to  the  instructions,  may 
cause  harmful  interference  to  radio  communications. 
However,  there  is  no  guarantee  that  interference  will  not 
occur  in  a  particular  installation.  If  this  equipment  does 
cause harmful interference to radio or television reception, 
which is found by turning the equipment off and on, the 
user  is  encouraged  to  try  to  correct  the  interference  by 
one or more of the following measures:
Reorient or relocate the receiving antenna
Increase  the  separation  between  the  equipment  or 
devices
Connect  the  equipment  to  an  outlet  other  than  the 
receiver’s
Consult a dealer or an experienced radio/TV technician 
for assistance
Safety Notices
Caution: To reduce the risk of fire, use only No.26 AWG or 
larger telecommunication line cord.
Do not use this product near water, for example, in a wet 
basement or near a swimming pool.
Avoid using this product during an electrical storm. There 
may be a remote risk of electric shock from lightning.
 WARNING:  This  product  contains  lead,  known 
to  the  State  of  California  to  cause  cancer,  and 
birth defects or other reproductive harm. Wash 
hands after handling.
•
•
•
•
Industry Canada (Canada)
This device complies with Industry Canada ICES-003 rule.
Cet appareil est conforme à la norme NMB003 d’Industrie 
Canada.
IC Statement
Operation is subject to the following two conditions:
This device may not cause interference and
This  device  must  accept  any  interference,  including 
interference  that  may  cause  undesired  operation  of 
the device.
Règlement d’Industry Canada
Le fonctionnement est soumis aux conditions suivantes : 
Ce périphérique ne doit pas causer d’interférences; 
Ce périphérique doit accepter toutes les interférences 
reçues,  y  compris  celles  qui  risquent  d’entraîner  un 
fonctionnement indésirable. 
1.
2.
1.
2.  
						

							
Appendix CWarranty and Regulatory Information
25
W

reless-G Broadband Router w

th SpeedBooster
User Information for Consumer Products 
Covered by EU Directive 2002/96/EC on 
Waste Electric and Electronic Equipment 
(WEEE)
This  document  contains  important  information  for  users 
with  regards  to  the  proper  disposal  and  recycling  of 
Linksys products. Consumers are required to comply with 
this notice for all electronic products bearing the following 
symbol:
Engl
 sh - Env  ronmental Informat  on for Customers   n 
the European Un  on
European  Directive  2002/96/EC  requires  that  the  equipment 
bearing this symbol  on the product and/or its packaging must 
not  be  disposed  of  with  unsorted  municipal  waste. The  symbol 
indicates  that  this  product  should  be  disposed  of  separately 
from regular household waste streams. It is your responsibility to 
dispose  of  this  and  other  electric  and  electronic  equipment  via 
designated collection facilities appointed by the government or 
local authorities. Correct disposal and recycling will help prevent 
potential  negative  consequences  to  the  environment  and 
human health. For more detailed information about the disposal 
of  your  old  equipment,  please  contact  your  local  authorities, 
waste  disposal  service,  or  the  shop  where  you  purchased  the 
product.
Български  (Bulgar  an)  -  Информация  относно 
опаз\fането  на  околната  среда  за  потребители  \f 
\b\fропейския съюз
Европейска  директива  2002/96/EC  изисква  уредите,  носещи 
този  симво\f   върху  изде\fието  и/и\fи  опаковката  му,  да  не 
се  изхвър\fя  т  с  несортирани  \bитови  отпадъци.  Симво\fът 
о\bозначава,  че  изде\fието  тря\bва  да  се  изхвър\fя  отде\fно  от 
сметосъ\bирането  на  о\bикновените  \bитови  отпадъци.  Ваша 
е  отговорността  този  и  другите  е\fектрически  и  е\fектронни 
уреди  да  се  изхвър\fят  в  предварите\fно  опреде\fени  от 
държавните и\fи о\bщински органи специа\fизирани пунктове 
за  съ\bиране.  Прави\fното  изхвър\fяне  и  рецик\fиране 
ще  спомогнат  да  се  предотвратят  евентуа\fни  вредни  за 
око\fната  среда  и  здравето  на  насе\fението  пос\fедствия.  За 
по-подро\bна  информация  относно  изхвър\fянето  на  вашите 
стари  уреди  се  о\bърнете  към  местните  в\fасти,  с\fуж\bите  за 
сметосъ\bиране и\fи магазина, от който сте закупи\fи уреда.
Cešt na  (Czech)  - Informace  o  ochraně  ž  votního 
prostředí pro zákazníky v zemích Evropské un  e
Evropská  směrnice  2002/96/ES  zakazuje,  aby  zařízení  označené 
tímto symbolem  na produktu anebo na obalu bylo likvidováno 
s  netříděným  komunálním  odpadem.  Tento  symbol  udává, 
že  daný  produkt  musí  být  likvidován  odděleně  od  běžného 
komunálního odpadu. Odpovídáte za likvidaci tohoto produktu 
a  dalších  elektrických  a  elektronických  zařízení  prostřednictvím 
určených  sběrných  míst  stanovených  vládou  nebo  místními 
úřady.  Správná  likvidace  a  recyklace  pomáhá  předcházet 
potenciálním negativním dopadům na životní prostředí a lidské 
zdraví.  Podrobnější  informace  o  likvidaci  starého  vybavení  si 
laskavě  vyžádejte  od  místních  úřadů,  podniku  zabývajícího  se 
likvidací  komunálních  odpadů  nebo  obchodu,  kde  jste  produkt 
zakoupili.
Dansk (Dan sh) - M  ljø  nformat  on for kunder    EU
EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol 
  på  produktet  og/eller  emballagen  ikke  må  bortskaffes  som 
usorteret kommunalt affald. Symbolet betyder, at dette produkt 
skal  bortskaffes  adskilt  fra  det  almindelige  husholdningsaffald. 
Det  er  dit  ansvar  at  bortskaffe  dette  og  andet  elektrisk  og 
elektronisk  udstyr  via  bestemte  indsamlingssteder  udpeget 
af  staten  eller  de  lokale  myndigheder.  Korrekt  bortskaffelse 
og  genvinding  vil  hjælpe  med  til  at  undgå  mulige  skader  for 
miljøet  og  menneskers  sundhed.  Kontakt  venligst  de  lokale 
myndigheder,  renovationstjenesten  eller  den  butik,  hvor  du 
har  købt  produktet,  angående  mere  detaljeret  information  om 
bortskaffelse af dit gamle udstyr.
Deutsch  (German)  -  Umwelt nformat  on  für  Kunden 

nnerhalb der Europä  schen Un  on
Die Europäische Richtlinie 2002/96/EC verlangt, dass technische 
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit 
diesem Symbol versehen ist , nicht zusammen mit unsortiertem 
Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf 
hin,  dass  das  Produkt  von  regulärem  Haushaltmüll  getrennt 
entsorgt  werden  sollte.  Es  liegt  in  Ihrer  Verantwortung,  dieses 
Gerät  und  andere  elektrische  und  elektronische  Geräte  über 
die  dafür  zuständigen  und  von  der  Regierung  oder  örtlichen 
Behörden  dazu  bestimmten  Sammelstellen  zu  entsorgen. 
Ordnungsgemäßes  Entsorgen  und  Recyceln  trägt  dazu  bei, 
potentielle  negative  Folgen  für  Umwelt  und  die  menschliche 
Gesundheit  zu  vermeiden. Wenn  Sie  weitere  Informationen  zur 
Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an 
die  örtlichen  Behörden  oder  städtischen  Entsorgungsdienste 
oder an den Händler, bei dem Sie das Produkt erworben haben.  
						

							
Appendix CWarranty and Regulatory Information
26
W

reless-G Broadband Router w

th SpeedBooster
Eest
   (Eston  an)  -  Keskkonnaalane   nformats  oon 
Euroopa L  dus asuvatele kl  ent  dele
Euroopa  Liidu  direktiivi  2002/96/EÜ  nõuete  kohaselt  on 
seadmeid,  millel  on  tootel  või  pakendil  käesolev  sümbol , 
keelatud  kõrvaldada  koos  sorteerimata  olmejäätmetega.  See 
sümbol  näitab,  et  toode  tuleks  kõrvaldada  eraldi  tavalistest 
olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva 
ja  ka  muud  elektri-  ja  elektroonikaseadmed  riigi  või  kohalike 
ametiasutuste  poolt  ette  nähtud  kogumispunktide  kaudu. 
Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida 
võimalikke  negatiivseid  tagajärgi  keskkonnale  ning  inimeste 
tervisele.  Vanade  seadmete  kõrvaldamise  kohta  täpsema 
informatsiooni  saamiseks  võtke  palun  ühendust  kohalike 
ametiasutustega,  jäätmekäitlusfirmaga  või  kauplusega,  kust  te 
toote ostsite.
Español (Span sh) - Informac  ón med  oamb  ental para 
cl  entes de la Un  ón Europea
La  Directiva  2002/96/CE  de  la  UE  exige  que  los  equipos  que 
lleven  este  símbolo   en  el  propio  aparato  y/o  en  su  embalaje 
no  deben  eliminarse  junto  con  otros  residuos  urbanos  no 
seleccionados.  El  símbolo  indica  que  el  producto  en  cuestión 
debe separarse de los residuos domésticos convencionales con 
vistas a su eliminación. Es responsabilidad suya desechar este y 
cualesquiera otros aparatos eléctricos y electrónicos a través de 
los puntos de recogida que ponen a su disposición el gobierno y 
las autoridades locales. Al desechar y reciclar correctamente estos 
aparatos  estará  contribuyendo  a  evitar  posibles  consecuencias 
negativas  para  el  medio  ambiente  y  la  salud  de  las  personas.  Si 
desea  obtener  información  más  detallada  sobre  la  eliminación 
segura  de  su  aparato  usado,  consulte  a  las  autoridades  locales, 
al  servicio  de  recogida  y  eliminación  de  residuos  de  su  zona  o 
pregunte en la tienda donde adquirió el producto.
ξλληνικά  (Greek)  -  Στοιχεία  περιβαλλοντικής 
προστασίας  για  πελάτες  εντός  της  Ευρωπαϊκής 
Ένωσης
Η Κοινοτική Οδηγία 2002/96/EC απαιτεί ότι ο εξοπλισμός ο οποίος 
φέρει  αυτό  το  σύμβολο   στο  προϊόν  και/ή  στη  συσκευασία 
του  δεν  πρέπει  να  απορρίπτεται  μαζί  με  τα  μικτά  κοινοτικά 
απορρίμματα.  Το  σύμβολο  υποδεικνύει  ότι  αυτό  το  προϊόν  θα 
πρέπει  να  απορρίπτεται  ξεχωριστά  από  τα  συνήθη  οικιακά 
απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος 
και  άλλου  ηλεκτρικού  και  ηλεκτρονικού  εξοπλισμού  μέσω  των 
καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων οι 
οποίες παρέχονται από το κράτος ή τις αρμόδιες τοπικές αρχές. 
Η  σωστή  απόρριψη  και  ανακύκλωση  συμβάλλει  στην  πρόληψη 
πιθανών αρνητικών συνεπειών για το περιβάλλον και την υγεία. 
Για  περισσότερες  πληροφορίες  σχετικά  με  την  απόρριψη  του 
παλιού σας εξοπλισμού, παρακαλώ επικοινωνήστε με τις τοπικές 
αρχές,  τις  υπηρεσίες  απόρριψης  ή  το  κατάστημα  από  το  οποίο 
αγοράσατε το προϊόν.
França s  (French)  -  Informat  ons  env  ronnementales 
pour les cl  ents de l’Un  on européenne
La  directive  européenne  2002/96/CE  exige  que  l’équipement 
sur  lequel  est  apposé  ce  symbole   sur  le  produit  et/ou  son 
emballage ne soit pas jeté avec les autres ordures ménagères. Ce 
symbole indique que le produit doit être éliminé dans un circuit 
distinct  de  celui  pour  les  déchets  des  ménages.  Il  est  de  votre 
responsabilité  de  jeter  ce  matériel  ainsi  que  tout  autre  matériel 
électrique  ou  électronique  par  les  moyens  de  collecte  indiqués 
par  le  gouvernement  et  les  pouvoirs  publics  des  collectivités 
territoriales. L’élimination et le recyclage en bonne et due forme 
ont  pour  but  de  lutter  contre  l’impact  néfaste  potentiel  de  ce 
type de produits sur l’environnement et la santé publique. Pour 
plus  d’informations  sur  le  mode  d’élimination  de  votre  ancien 
équipement,  veuillez  prendre  contact  avec  les  pouvoirs  publics 
locaux, le service de traitement des déchets, ou l’endroit où vous 
avez acheté le produit.
Ital ano  (Ital  an)  -  Informaz  on    relat  ve  all’amb  ente 
per    cl  ent   res  dent   nell’Un  one Europea
La direttiva europea 2002/96/EC richiede che le apparecchiature 
contrassegnate  con  questo  simbolo   sul  prodotto  e/o 
sull’imballaggio  non  siano  smaltite  insieme  ai  rifiuti  urbani 
non  differenziati.  Il  simbolo  indica  che  questo  prodotto  non 
deve  essere  smaltito  insieme  ai  normali  rifiuti  domestici.  È 
responsabilità  del  proprietario  smaltire  sia  questi  prodotti  sia 
le  altre  apparecchiature  elettriche  ed  elettroniche  mediante 
le  specifiche  strutture  di  raccolta  indicate  dal  governo  o  dagli 
enti  pubblici  locali.  Il  corretto  smaltimento  ed  il  riciclaggio 
aiuteranno  a  prevenire  conseguenze  potenzialmente  negative 
per  l’ambiente  e  per  la  salute  dell’essere  umano.  Per  ricevere 
informazioni  più  dettagliate  circa  lo  smaltimento  delle  vecchie 
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli 
enti pubblici di competenza, il servizio di smaltimento rifiuti o il 
negozio nel quale avete acquistato il prodotto.
Latv ešu  valoda  (Latv  an)  -  Ekoloģ  ska   nformāc  ja 
kl  ent  em E  ropas Sav  enības jur  sd  kc  jā
Direktīvā  2002/96/EK  ir  prasība,  ka  aprīkojumu,  kam  pievienota 
zīme   uz  paša  izstrādājuma  vai  uz  tā  iesaiņojuma,  nedrīkst 
izmest  nešķirotā  veidā  kopā  ar  komunālajiem  atkritumiem 
(tiem,  ko  rada  vietēji  iedzīvotāji  un  uzņēmumi).  Šī  zīme  nozīmē 
to,  ka  šī  ierīce  ir  jāizmet  atkritumos  tā,  lai  tā  nenonāktu  kopā  ar 
parastiem  mājsaimniecības  atkritumiem.  Jūsu  pienākums  ir  šo 
un  citas  elektriskas  un  elektroniskas  ierīces  izmest  atkritumos, 
izmantojot  īpašus  atkritumu  savākšanas  veidus  un  līdzekļus,  ko 
nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos 
un  pārstrāde  tiek  veikta  pareizi,  tad  mazinās  iespējamais 
kaitējums  dabai  un  cilvēku  veselībai.  Sīkākas  ziņas  par 
novecojuša  aprīkojuma  izmešanu  atkritumos  jūs  varat  saņemt 
vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā, 
kur iegādājāties šo izstrādājumu.