Linksys Router WAP54G User Manual

24Chapter 5: Setting up the Wireless-G Access Point
Using the Setup Wizard
Wireless-G Access Point
5. When the next screen appears, you will specify which users you will allow access to this protected network. 
Enter the E-mail Address, User Name, and Password (once in the Password field and again in the Confirm 
Password field) for each user. Then, click Add. 
To remove a user from the list, select the user, and then click Remove.
6. The Access Point is now configured for Linksys Wireless Guard. To...

25Chapter 6: Using the Linksys Wireless Guard Service
Client Software Installation
Wireless-G Access Point
Chapter 6: Using the Linksys Wireless Guard Service
This chapter is only for users who have signed up for Linksys Wireless Guard to secure their network and have 
configured the Access Point for Linksys Wireless Guard. (Refer to “Chapter 5: Setting up the Wireless-G Access 
Point.”)
You will now install the client software needed to securely connect a PC to the Access Point that is protected by...

26Chapter 6: Using the Linksys Wireless Guard Service
Client Software Installation
Wireless-G Access Point
3. The next screen will tell you to close all other applications before continuing. If no other applications are 
open, click Next to continue. If you want to exit to close your other applications, click Cancel.
4. A license agreement will appear next. Scroll down or press PAG E  D OW N to read the entire agreement. To 
accept the terms and continue the installation, click Ye s. To quit the...

27Chapter 6: Using the Linksys Wireless Guard Service
Client Software Installation
Wireless-G Access Point
5. On this screen, you will be informed where the Linksys Wireless Guard client software will be installed. To 
install to this folder, click Next. If you want to choose a different location for the folder, click the Browse 
button and select the location.
Click Back to return to the previous screen. Click Cancel to cancel the installation.
6. The InstallShield Wizard will start copying program...

28Chapter 6: Using the Linksys Wireless Guard Service
Network Access
Wireless-G Access Point
7. The Linksys Wireless Guard client software is successfully installed. Before you can use the program, you 
must restart your computer. Select Ye s to restart your computer now. Select No to restart your computer at a 
later time. Remove any disks that are in their drives, and then click Finish.
8. After the Linksys Wireless Guard client software is installed, a key icon will be displayed on the right side of...

29Chapter 6: Using the Linksys Wireless Guard Service
Your Account
Wireless-G Access Point
Your Account
This section explains how to access your account, how to add a guest, how to add another member to your 
account, and how to secure and unprotect the Linksys Wireless Guard network.
For more detailed information on your account and the website, click your computer’s Start button, select the 
Linksys Wireless Guard folder, and then click Linksys Wireless Guard Help. For further information on Linksys...

30Chapter 6: Using the Linksys Wireless Guard Service
Your Account
Wireless-G Access Point
Add a Guest
1. On the Wireless Guard Member Website home screen, click the Network Admin tab.
2. The screen in Figure 6-11 will appear. Under Network Administration, click Modify Access Control.Figure 6-10: Home
Figure 6-11: Network Administration 

31Chapter 6: Using the Linksys Wireless Guard Service
Your Account
Wireless-G Access Point
3. The screen in Figure 6-12 will appear. Under Guests, click Add Guest.
4. The screen in Figure 6-13 will appear. Enter the Guest User Name, Guest First Name, Guest Last Name, 
Password, Password Verify, and Access Duration. Then click Submit.
Guest User Name. Enter a user name of the guest you want to add.
Guest First Name. Enter the first name of the guest you want to add.
Guest Last Name. Enter the last name of...

32Chapter 6: Using the Linksys Wireless Guard Service
Your Account
Wireless-G Access Point
Add a Member
To add a member, follow the instructions in the “Add a Guest” section, steps 1 through 3, except in step 3, click 
Add Member.
The screen in Figure 6-14 will appear. Registered members can enter their e-mail address in the field provided 
and select the duration for access from the drop-down menu. If you want this network member to have the 
authority to put the network in Fallback Mode in case network...

33Chapter 6: Using the Linksys Wireless Guard Service
Your Account
Wireless-G Access Point
3. When the Enter subscriber information screen appears, enter the first and last names, phone number, if 
desired, and then e-mail address of the new member. Click Next.
Click Back to return to the previous screen. Click Cancel to cancel the member registration.
4. When the next screen appears, choose who will be paying for the account. If the new member will be paying 
for the account, click I will pay for my own...