Liesegang Ddv 2500 Projector User Manual

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr   MMMaaannnuuuaaalll   
Adjust the Zoom, Focus and Keystone 
1.  Use the Image-focus con-
trol (on the projector only) 
to sharpen the projected 
image A. 
2.  Use the Image-zoom con-
trol (on the projector only) 
to resize the projected im-
age and screen size B. 
A
B
 
3.  Use the Keystone buttons 
(on the projector or the 
remote control) to correct 
image-trapezoid (wider 
top or bottom) effect. 
 
 The keystone control ap-
pears on the display. 
 
– 14 –  
						

							
SSSeeetttuuuppp   aaannnddd   OOOpppeeerrraaatttiiiooonnn   
Adjusting the Volume 
1.  Press the Volume +/- but-
tons on the projector or 
the remote control.  
The volume control ap-
pears on the display. 
2.  Use the Volume +/- but-
tons to adjust the level. 
 
 
3.  Press the Mute button (on 
the remote control only) 
to turn off the volume.  
 
4.  Press any Volume +/- 
buttons on the projector or 
the remote control to turn 
off mute.  
 
 
– 15 –  
						

							
 
 
ON-SCREEN DISPLAY MENU SETTINGS 
On-Screen Display Menu Controls 
The projector has an On-Screen Display (OSD) that lets you make image adjustments and change 
various settings.  
Navigating the OSD 
You can use the remote control or the buttons on the top of the projector to navigate and make 
changes to the OSD. The following illustration shows the corresponding buttons on the remote control 
and on the projector. 
 
Note: 
Depending on the video source not all items in the OSD are available. For example, the Horizon-
tal/Vertical Position items can only be modified when connected to a PC. Items that cannot be 
changed are grayed out.  
 
 
 
 
 
  
						

							
OOOnnn---SSScccrrreeeeeennn   DDDiiisssppplllaaayyy   MMMeeennnuuu   SSSeeettttttiiinnngggsss   
Setting the OSD Language 
You may want to reference the OSD on your projector while reading this section. Set the OSD lan-
guage to your preference before continuing. (The default language is English.) 
1. Press the Menu button. The Main menu appears. 
 
Note: 
If you are in video mode, only Contrast and Brightness will be shown in the Main screen. 
2. Press the cursor  button until Language is highlighted.  
 
3. Press the cursor  button until the language you want is highlighted.  
4. Press the cursor  or  button to select the language. 
5. Press the Menu button twice to close the OSD.   
 
– 17 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr   MMMaaannnuuuaaalll   
Main Menu  
Press the Menu button to open the Main menu. Press the cursor  button to move up and down in 
the Main menu. 
 
Note: 
HPosition and VPosition are not shown when connected to a video source. These items are set 
automatically by the projector. 
ITEM DESCRIPTION DEFAULT
Contrast Press the cursor  button to adjust the contrast. (Range: 0—100) 50 
Brightness Press the cursor  button to adjust the brightness. (Range: 0—100) 50 
HPosition Press the cursor  button to move the image left or right. (Range: 0—100) 50 
VPosition Press the cursor  button to move the image up or down. (Range: 0—100) 50 
Reset Press the cursor  or  button to return settings to the factory defaults. — 
 
 
– 18 –  
						

							
OOOnnn---SSScccrrreeeeeennn   DDDiiisssppplllaaayyy   MMMeeennnuuu   SSSeeettttttiiinnngggsss   
Setup Menu  
Press the Menu button to open the OSD menu. Press  to move to the Setup menu. Press  to 
move up and down in the Setup menu. 
 
ITEM DESCRIPTION DEFAULT
Frequency This item eliminates flickering on the screen by adjusting the sampling clock. 
Press the cursor  button to adjust. (Range: 0—100) 
Auto 
Tracking Press the cursor  button to adjust the sampling number. (Range: 0—100) Auto 
Video AGC Press the cursor  button to enable/disable video automatic gain control. Enabled 
Aspect Ratio Press the cursor  button to toggle between the 4:3 standard format and 
16.9 High Definition TV (HDTV) format. 
4:3 
Press the cursor  button to choose from four projection methods: 
 Desktop mount, front of screen 
 Desktop mount, rear of screen 
 Ceiling mount, front of screen 
Projection 
 Ceiling mount, rear of screen 
Desktop 
front 
 
Volume Press the cursor  button to adjust the volume. (Range: 0—8) 4 
Keystone Press the cursor  button to correct distortion of the projected image.  
(Range: 0—100) 
50 
Reset Press the cursor  or  button to return settings to the factory defaults. — 
– 19 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr   MMMaaannnuuuaaalll   
ColorMgr Menu  
Press the Menu button to open the OSD menu. Press  to move to the ColorMgr menu. Press 
 to move up and down in the ColorMgr menu.  
 
ITEM DESCRIPTION DEFAULT
Color  
Saturation  
Press the cursor  button to adjust the video saturation. (Range: 0—100) 50 
Color Tint  Press the cursor  button to adjust the video tint/hue. (Range: 0—100) 50 
Press the cursor  button to select from three video types.   
RGB PC 
YPbPr High Definition TV (HDTV) 
Video Type 
YCbCr Some DVD component video output 
YPbPr 
(HDTV) 
Sharpness Press the cursor  button to adjust the display sharpness. (Range: 1—5) 3 
Color Temp. Press the cursor  button to adjust the video tint/hue.  
(Range: Cool/Normal/Warm) 
Normal 
OSD  
Translucent 
Press the cursor  button to turn On or Off. When On the image behind 
the OSD will be partially visible. 
Off 
Gamma Press the cursor  button to adjust the gamma correction of the display. 
(Range: PC—B&W) 
 best for PC connections 
 best for MAC connections 
 best for displaying color charts 
 best for video connections 
 best for displaying black and white 
PC/Video 
autodetect
Reset Press the cursor  or  button to return settings to the factory de-
faults. 
— 
– 20 –  
						

							
OOOnnn---SSScccrrreeeeeennn   DDDiiisssppplllaaayyy   MMMeeennnuuu   SSSeeettttttiiinnngggsss   
– 21 –  
						

							
DDDLLLPPP   PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr   MMMaaannnuuuaaalll   
 Language Menu  
Press the Menu button to open the OSD menu. Press  to move to the Language menu. Press 
 to move up and down in the Language menu. 
 
ITEM DESCRIPTION DEFAULT 
English 
French 
German 
Italian 
Spanish 
Swedish 
Chinese Simplified 
Chinese Traditional 
Japanese 
Korean 
Press the cursor  button to move up and down in the 
menu. 
 
Press the cursor  or  button to select the lan-
guage. 
English 
 
– 22 –  
						

							
OOOnnn---SSScccrrreeeeeennn   DDDiiisssppplllaaayyy   MMMeeennnuuu   SSSeeettttttiiinnngggsss   
Utility Menu  
Press the Menu button to open the OSD menu. Press  to move to the Utility menu. Press  to 
move up and down in the Utility menu. 
 
ITEM DESCRIPTION DEFAUL
T 
PIP Size Press the cursor  button to select the picture in picture size.  
(Range: Off; Small; Medium; Large) Off 
PIP Position Press the cursor  button to choose where the PIP window appears. 
(Range: From upper-left to bottom-right) 
Upper 
left 
PIP Input Press the cursor  button to select the PIP (see Note below) source. 
(Range: Auto; S-video; Comp. (composite)) Auto 
Blank Color Press the cursor  button to change the blanking color.   
(Range: Black; Red; Green; Blue) Blue 
OSD  
Position 
Press the cursor  button to choose where the OSD window appears. 
(Range: From upper-left to bottom-right) Center 
OSD Display 
Time 
Press the cursor  button to choose how long the OSD window ap-
pears. (Range: 10—30 seconds) 15 
Network DHCP Shows Network DHCP status. 
Network IP 
Address 
Displays IP address. 
These 
items are 
display 
only. 
Lamp Mode Toggles between Normal and ECO lamp modes. ECO mode uses less power 
but decreases the lamp brightness. Normal 
Reset Press the cursor  or  button to return settings to the factory de-
faults. — 
– 23 –