Liesegang Ddv 2500 Projector User Manual
Here you can view all the pages of manual Liesegang Ddv 2500 Projector User Manual. The Liesegang manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
SPECIFICATIONS Specifications Display type TI DMD 0.7-inch x 1, 12 degrees, DDR DLP Resolution XGA 1024 x 768 Native Color 16.7 Million (24-bits/Pixel) Bandwidth Up to SXGA 1280x1024 @60 Hz Weight 3.08 kg (6.8 lbs.) Projection distance 1.5 to 10 meters (4.9 to 33 feet) Projection screen size .89 to 7.21 meters (35 inches to 284 inches) Brightness uniformity 80% Projection lens Manual zoom and focus Zoom ratio 1.20:1 Vertical keystone correction +/- 15 Projection methods Desktop...
Page 42
SSSpppeeeccciiifffiiicccaaatttiiiooonnnsss Audio speaker 3W mono speaker Remote keys Power, Auto, Menu, Source, Keystone, Volume Input/output connectors DVI-I VGA PC USB Composite video (RCAx1) Video S-Video (Mini-DIN) Mini-jack in Audio Mini-jack out Service/upgrades RS-232 Security Kensington slot – 35 –
Page 43
DDDLLLPPP PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr MMMaaannnuuuaaalll Projection Distance V. S. Projection Size ScreenWidth Screen Height Max. Screen Size Min. Screen Size Projection Distance Diagonal WidthHeightDiagonalWidth Height L A C B D 1.5m 1.1m 0.9m0.7m 0.9m 0.7m 0.5m 4.92 42.5 33.825.6 35.4 28.3 21.2 2.0m 1.4m 1.2m0.9m 1.2m 1.0m 0.7m 6.56 56.7 45.334.0 47.2 37.8 28.3 2.4m 1.7m 1.4m1.0m 1.4m 1.2m 0.9m 7.87 67.7 53.940.5 56.7 45.3 34 2.8m 2.0m 1.6m1.2m 1.7m 1.3m 1.0m...
Page 44
SSSpppeeeccciiifffiiicccaaatttiiiooonnnsss Max. Screen Size Min. Screen Size Projection Distance Diagonal WidthHeightDiagonalWidth Height L A C B D 19.68 170.1 135.8101.9141.7 113.4 85.0 10.0m 7.2m 5.8m4.3m 6.0m 4.8m 3.6m 32.8 283.5 226.8170.1236.2 188.9 141.7 – 37 –
Page 45
DDDLLLPPP PPPrrrooojjjeeeccctttooorrr———UUUssseeerrr MMMaaannnuuuaaalll Dimensions 9.7 cm (3.81 in.) 28.0cm(11.02in.) 20.5 cm (8.07 in.) – 38 –
Page 46
REGULATORY COMPLIANCE FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These lim its are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency ener gy and, if not installed and used in accordance with the instruction manual, ma y cause harmful interference...
Page 47
DDDLLLPPP PPPrrrooojjjeeeccctttooorrr———AAAddddddeeennnddduuummm ADDENDUM FOR THE DLP PROJECTOR About this Document This document is intended for network administrators. Copyright This publication, including all photographs, illustrations and software, is protected under international copy- right laws, with all rights reserved. Neither this document, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright July, 2004 Disclaimer The...
Page 48
RRRJJJ---444555 SSSeeettttttiiinnnggg uuuppp Table of contents REMOTE NETWORK OPERATION........................................................................\ ..................................................................4 Using a Static IP Address........................................................................\ .......................................................................4 THE REMOTE INTERFACE...
Page 49
Remote Network Operation When connected to a Local Area Network (LAN) by means of the RJ-45 connector, the projector can be controlled remotely through a Web browser by any of the clients (PCs connected to the LAN) on the LAN. The projector can also be accessed outside the LAN, provided a firewall is configured ac- cordingly. Using a Static IP Address Set the IP Setting to Static IP Address if you want the projector to have a permanent IP address. The following screens may vary depending...
Page 50
RRRJJJ---444555 SSSeeettttttiiinnnggg uuuppp 5. To prevent messages being filtered be- tween the remote PC and the projector, disable the proxy server in your Web browser. From the Internet Options window, click LAN Settings… 6. In the Local Area Network (LAN) Settings window, make sure the Proxy server check box is not checked. Click OK. 7. Enter the address of the projector in the address bar of your browser: http://10.0.50.100 The Remote page opens. – 5 –