LG Xh Tk953tv Owners Manual

Model: XH-TK953TV(XH-TK953TV, SH93TV-S/C/A, ST3TV)
Unique Features
P/NO : MFL57690304
5.1ch ez Set-upListen sound from TV, DVD
and Digital Device with vivid
5.1ch mode.Go to page 16
Full HD up-scaling
(1080p)View Full HD picture quality
with simple setup.Go to page 11
HDMI InSimple connection with Set
Top Box through HDMI.Go to page 7
USB Direct Recording Record music from CD to
your USB device.Go to page 18
Portable InListen to music from your
portable device (MP3,
Notebook, etc).Go to page 18
The...

2CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons. 
The exclamation point within an equilateral triangle is intended to alert...

3
Contents
Setting up  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Hooking up the unit  . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Remote control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Main unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
OSD Initial language settings  . . . . . . . . . . . . . . . . . .10
Initial Setting the Area Code  . . . . . . . . . . . . . . . . . . .10
Adjust the settings . . . . . . . . . . . . . . ....

Setting upInstalling the unit4Fix the unit tighten 3
screws (3 x 14) on the rear
side of the stand.Push the cables (system
cable and HDMI cable etc.)
into the cable fixing hole in
the stand. Attach the back
cover.
Insert the cable holder in
the hole on the stand.Connecting the active woofer to the unit.
- Connect one and of the system cable into the system jack on the unit.
Connect the other end of the system cable into the system jack on the
rear of the active woofer 
Mount the stand on the base
and...

5
Setting up
Connect the red end of each wire to the
terminals marked +(plus) and the black
end to the terminals marked - (minus).
b b 
 
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker:
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
Be careful of the followingBe careful to make sure children do not put their hands or any objects into...

6Hooking up the unitaConnect jacks on the unit (or active woofer)and your TV (DVD player or Digital Device etc.) using the cables.
bPlug the power cord into the power source.
Audio In connection
The unit’s Audio jacks are
colour coded (red for right
audio and white for left
audio). If your TV has only
one input for audio (mono),
connect it to the left (white)
audio jack on the unit.
Component Video connection
Connect the COMPONENT
VIDEO OUT jacks on the
active woofer to the corre-
sponding input jacks on...

7
Hooking up the unit
Hooking up the unit - more you
can doResolution SettingYou can change the resolution for component video
and HDMI output. 
To change the resolution using setup menu to select
the desired resolution - Auto, 480i(576i), 480p(576p),
720p, 1080i, 1080p.Available resolution according to connection[HDMI OUT]: Auto, 1080p, 1080i, 720p and 480p (or
576p)
[COMPONENT VIDEO OUT]: 480p (or 576p) and 480i
(or 576i)
[VIDEO OUT]: 480i (or 576i)Notes on HDMI Out connection•If your TV does not...

8

 
 
 
 
 
 
 
 
a 

 
 
 
 
 
 
 
 
INPUT :
Changes the input source
( AUX, AUX  OPT,
PORTABLE, HDMI IN, USB
)
SLEEP : 
Sets the System to turn off automatically at a
specified time. (Dimmer : Dims the LED (Light-emitting
diode) of front panel by half in power-on status.)
POWER: Switches the unit ON or OFF.FUNCTION : Selects the function (DVD/CD
, FM, AM)
TITLE : If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may not
appear.
DISPLAY: Accesses...

9
Tuning (-/+)
Skip / Search
Stop
EJECT
Play/Pause, Function 
Press and hold down this button for
about 3 seconds then press repeat-
edly to select other function.Volume
Control the volume when using
any function.
Disc slot
Power
Turn the unit on and off.
Moving into the Power save mode.
VSM
Selects the Dolby Pro Logic II
or Virtual sound.
Main Unit
Precautions in using the touch buttons
• Use the touch buttons with clean and dry hands.
- In a humid environment, wipe out any moisture on the touch buttons...

Adjust the settings - more you can doAdjust the language settingsOSD – Select a language for the Setup menu and on-screen display. 
There is displayed as “-” or other error mark on display when you
change OSD, do as follows;
- Restart the unit
- Change function
- Disconnect and connect USB device.
Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle. 
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons...