LG W2442pa Users Guide

Make sure to read the Important Precautions before using the product. 
Keep the Users Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
W2442PA
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being...

A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release of
heat generated during operation. If these openings are blocked, built-up\
 heat can
cause failures...

A3
Connecting the Display
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The pr\
oduct may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.
Connecting the stand 
1. Place the monitor with its front facing downward on a cushion or...

A4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range: Swivel: 356˚ 
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing
position, the forward tilt angle of the monitor should not exceed 5 degr\
ees.
Height Range: maximum 4.33 inch (110.0 mm)
110.0 mm...

A5
Connecting the Display
1.Lift the monitor to its highest height to utilize the Pivot function.
2.Landscape & Portrait : You can rotate the panel 90o  clockwise. 
Please be cautious and avoid contact between the monitor head and the St\
and 
Base when rotating the screen to access the Pivot function. If the monit\
or head 
touches the Stand Base, then the Stand Base could crack.
3.For detailed information, please refer to the Pivot Software CD provided\
.
Using the Pivot function
Stand sectionHead...

A6
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.
Positioning your display 
Using the cable holder
If you want to use the cable holder to let your cables together, please \
put them through
right as shown. For if you dont do like that, you cannot use Pivot func\
tion smoothly.
 

Connect DVI Cable
Connect Dsub Cable (PC)
Connect Dsub Cable (Mac)
Connect HDMI Cable
Connect Audio Cable 
A7
Using the Computer
1.Make sure to turn off the computer and  product. Connect the cable as be\
low sketch map
form to .1
2.Press        button on the front switch panel to turn the power on. When monitor power is turned on, the 
Self Image Setting Function is  executed automatically.
(Only Analog Mode)
2
Connecting the Display
A
B
C
NOTE‘ Self Image Setting Function’?  This function provides the...

A8
Connecting the Display
3.Press the SOURCEbutton at the front side of the monitor.
When connecting with a DVI signal input cable.
• Select D V I: DVI digital signal.
When connecting with a D-sub signal cable.
• Select RGB: D-sub analogue signal.
When connecting with a HDMI cable.
• Select HDMI
RGB
DVI INPUT
HDMI
• Audio & V ideo connectionTo hear sound, Connect Video and audio cable properly.
2134
Kabelli audioje
Moritor
Dalje e audios
Connection scene
Connection ,         :
Use audio cable.
Connection...

A9
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message  OSD LOCKED should appear.
You can unlock the OSD controls at any time by pushing
the  MENU button for several seconds. The message
OSD UNLOCKED should appear.
Front Panel Controls
4 : 3 in Wide
Button
WIDE mode  4 : 3...