LG W1943sb Owners Manual

							16
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
Press the MENUButton, then the main
menu of the OSD appears.
Main Menu

On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.

Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator red?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Pressthe Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?

Troubleshooting
Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor found message?
Have you installed the
display driver?• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.

Specifications                                                          W1943SB
18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.01cm
0.30 x 0.30 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 61 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green) Sync Input
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 HzResolution
Plug&Play
On Mode:21W(Typ.)Sleep Mode
1 W
Off Mode
1 WPower
Consumption
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    44.90 cm / 17.68 inches 
Height 36.10 cm / 14.21 inches     
Depth 18.30 cm /  7.20 inches
Weight(excl. packing) 3.3 kg (7.28 lbs)Dimensions
& Weight
Tilt : -5˚~15˚Range
AC 100-240V~ 50/60Hz 0.8A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand
Width    44.90 cm / 17.68 inches 
Height 29.05 cm / 11.44 inches   
Depth 5.85 cm /  2.30 inches
NOTE
Information in this document is subject to change without notice.

Specifications                                                          W2243S
21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 54.686cm
0.248 x 0.248 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green) Sync Input
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 HzResolution
Plug&Play
On Mode:40W(Typ.)Sleep Mode
1 W
Off Mode
1 WPower
Consumption
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    51.64 cm / 20.33 inches 
Height 39.61 cm / 15.59 inches     
Depth 19.80 cm /  7.80 inches
Weight(excl. packing) 3.8 kg (8.38 lbs)Dimensions
& Weight
Tilt : -5˚~15˚Range
AC 100-240V~ 50/60Hz 1.0A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand
Width    51.64 cm / 20.33 inches 
Height 33.27 cm / 13.10 inches   
Depth 6.20 cm /  2.44 inches
NOTE
Information in this document is subject to change without notice.

Specifications
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
*12720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 108031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.50070
60
75
60
75
60
75
75
60
75
60
60 VGA
VGA
VGA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
W2243S/W2243T
*Recommend Mode
Indicator
On Mode
Sleep Mode
Off ModeRed
Red Blinking 
Off
LED Color
MODE
 
						

							15
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu              Sub menu Description
To adjust the USER sub-menu function,
press the AUTO/SET Button
MOVIE
INTERNET
NORMAL
DEMO
USER
When the F-ENGINE is executed, the screen is split
to show the effects of the selected function. The active
state is to the left and the inactive state is to the right
side of the screen. Select the function you want and
press the [MENU] button to save the setting. 
F-ENGINEActive state Inactive state
The following OSD screen will appear when you press the                   button
on the front of the monitor.This feature lets you easily select the best desired
image condition optimized to the environment (ambient illumination, image
types etc).
This is under normal operating conditions.
* Normal mode is when f-ENGINE is turned off.
For moving images in videos or movies.
For text images (Word processing etc.).
USER You can manually adjust ACE or RCM. 
You can save or restore the adjusted value even 
when using a different 
condition.
Not applied
Green enhance
MENU
: Save & Exit 
,     : Move
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menuSalmon color tone
Color Enhance
• ACE (Adaptive Clarity Enhancer): Selects the clarity mode.
Not applied
Weak clarity and luminosity contrast. 
Strong clarity and luminosity contrast. 
• RCM (Real Color Management): Selects the color mode.
This is used for advertising in the store. The screen will
be divided to show the standard mode on the left and
video mode on the right so that the consumers can
check the difference after applying the video mode. 

On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PICTURE
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
BRIGHTNESS
CONTRAST 
GAMMATo adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
PRESET
RED
GREEN
BLUESelect the screen color. 
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu

On Screen Display(OSD) Selection and Adjustment 
Press the      ,      buttons to reset immediately.
SETUP
MENU: Exit
: Adjust
: Adjust
SET    : Select another  
sub-menu
Main menu Sub menu Description
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
W1943SB/W2043SE/W2243S
W1943TB/W2043TE/W2243T
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal. 

Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution. 
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer. 

Specifications                                                          W1943TB
18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.01cm
0.30 x 0.30 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 61 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green), DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 HzResolution
Plug&Play
On Mode:21W(Typ.)Sleep Mode
1 W
Off Mode
1 WPower
Consumption
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    44.90 cm / 17.68 inches 
Height 36.10 cm / 14.21 inches    
Depth 18.30 cm /  7.20 inches
Weight(excl. packing) 3.3 kg (7.28 lbs)Dimensions
& Weight
Tilt : -5˚~15˚Range
AC 100-240V~ 50/60Hz 0.8A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand
Width    44.90 cm / 17.68 inches 
Height 29.05 cm / 11.44 inches   
Depth 5.85 cm /  2.30 inches
NOTE
Information in this document is subject to change without notice.
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
Press the MENUButton, then the main
menu of the OSD appears.
Main Menu

On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.

Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator red?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Pressthe Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 

						

							15
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu              Sub menu Description
To adjust the USER sub-menu function,
press the AUTO/SET Button
MOVIE
INTERNET
NORMAL
DEMO
USER
When the F-ENGINE is executed, the screen is split
to show the effects of the selected function. The active
state is to the left and the inactive state is to the right
side of the screen. Select the function you want and
press the [MENU] button to save the setting. 
F-ENGINEActive state Inactive state
The following OSD screen will appear when you press the                   button
on the front of the monitor.This feature lets you easily select the best desired
image condition optimized to the environment (ambient illumination, image
types etc).
This is under normal operating conditions.
* Normal mode is when f-ENGINE is turned off.
For moving images in videos or movies.
For text images (Word processing etc.).
USER You can manually adjust ACE or RCM. 
You can save or restore the adjusted value even 
when using a different 
condition.
Not applied
Green enhance
MENU
: Save & Exit 
,     : Move
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menuSalmon color tone
Color Enhance
• ACE (Adaptive Clarity Enhancer): Selects the clarity mode.
Not applied
Weak clarity and luminosity contrast. 
Strong clarity and luminosity contrast. 
• RCM (Real Color Management): Selects the color mode.
This is used for advertising in the store. The screen will
be divided to show the standard mode on the left and
video mode on the right so that the consumers can
check the difference after applying the video mode. 

On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
PICTURE
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
BRIGHTNESS
CONTRAST 
GAMMATo adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
PRESET
RED
GREEN
BLUESelect the screen color. 
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu

On Screen Display(OSD) Selection and Adjustment 
Press the      ,      buttons to reset immediately.
SETUP
MENU: Exit
: Adjust
: Adjust
SET    : Select another  
sub-menu
Main menu Sub menu Description
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
LANGUAGE. FACTORY
RESET POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
W1943SB/W2043SE/W2243S
W1943TB/W2043TE/W2243T
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal. 

Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution. 
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer. 

Specifications                                                          W1943TB
18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 47.01cm
0.30 x 0.30 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 61 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green), DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 HzResolution
Plug&Play
On Mode:21W(Typ.)Sleep Mode≤1 W
Off Mode≤1 WPower
Consumption
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    44.90 cm / 17.68 inches 
Height 36.10 cm / 14.21 inches    
Depth 18.30 cm /  7.20 inches
Weight(excl. packing) 3.3 kg (7.28 lbs)Dimensions
& Weight
Tilt : -5˚~15˚Range
AC 100-240V~ 50/60Hz 0.8A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand
Width    44.90 cm / 17.68 inches 
Height 29.05 cm / 11.44 inches   
Depth 5.85 cm /  2.30 inches
NOTE
Information in this document is subject to change without notice.
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
Press the MENUButton, then the main
menu of the OSD appears.
Main Menu

On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.

Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator red?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Pressthe Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 

						

							25
Specifications                                                          \
W2043TE
20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating  
Visible diagonal size : 50.8cm
0.2766 x 0.2766 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) 
Input Form Separate Sync. SOG (Sync On Green), DigitalSync Input
Signal Input 15 pin D-Sub ConnectorDVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1600 x 900 @60 Hz 
Recommend VESA 1600 x 900 @60 HzResolution
Plug&Play
On Mode   :
 25  W(Typ.)Sleep Mode ≤0.5 W
Off Mode ≤0.5 WPower 
Consumption
Operating Conditions
Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-CondensingEnvironment 
al Conditions
With Stand 
Width    48.36 cm / 19.04 inches 
Height 37.68 cm / 14.83 inches    
Depth 18.30 cm /  7.20 inches 
Weight(excl. packing)  3.2 kg (7. 05 lbs)Dimensions
& Weight
Tilt : -5 ˚~15 ˚Range
AC 100-240V~ 50/60Hz 1.0A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand 
Width    48.36 cm / 19.04 inches 
Height 31.40 cm / 12.36 inches   
Depth 6.30 cm /  2.48 inches
NOTE
Information in this document is subject to change without notice.
 
						

							26
Specifications                                                          \
W2043SE
20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating  
Visible diagonal size : 50.8cm
0.2766 x 0.2766 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) 
Input Form Separate Sync. SOG (Sync On Green)Sync Input
Signal Input 15 pin D-Sub Connector 
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)Video Input
Max VESA 1600 x 900 @60 Hz 
Recommend VESA 1600 x 900 @60 HzResolution
Plug&Play
On Mode  :
 25  W(Typ.)Sleep Mode ≤0.5 W
Off Mode ≤0.5 WPower 
Consumption
Operating Conditions
Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-CondensingEnvironment 
al Conditions
With Stand 
Width    48.36 cm / 19.04 inches 
Height 37.68 cm / 14.83 inches    
Depth 18.30 cm /  7.20 inches 
Weight(excl. packing)  3.2 kg (7.05 lbs)Dimensions
& Weight
Tilt : -5 ˚~15 ˚Range
AC 100-240V~ 50/60Hz 1.0A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand 
Width    48.36 cm / 19.04 inches 
Height 31.40 cm / 12.36 inches   
Depth 6.30 cm /  2.48 inches
NOTE
Information in this document is subject to change without notice.
 
						

							27
Specifications                                                          W2243T
21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 54.686cm
0.248 x 0.248 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green), DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 HzResolution
Plug&Play
On Mode:40W(Typ.)Sleep Mode≤1 W
Off Mode≤1 WPower
Consumption
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    51.64 cm / 20.33 inches 
Height 39.61 cm / 15.59 inches     
Depth 19.80 cm /  7.80 inches
Weight(excl. packing) 3.8 kg (8.38 lbs)Dimensions
& Weight
Tilt : -5˚~15˚Range
AC 100-240V~ 50/60Hz 1.0A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B
Without Stand
Width    51.64 cm / 20.33 inches 
Height 33.27 cm / 13.10 inches   
Depth 6.20 cm /  2.44 inches
NOTE
Information in this document is subject to change without notice.

Specifications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
*9720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1360 x 76831.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
47.71270
60
75
60
75
75
60
75
60 VGA
VGA
VESA 
VESA
VESA
MAC
VESA
VESA
VESA
W1943SB/W1943TB
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
*9720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1600 x 90031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
60.00070
60
75
60
75
60
75
75
60 VGA
VGA
VESA 
VESA
VESA
VESA
VESA
VESA
VESA
W2043SE/W2043TE

Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate
or the interchange device.
1.Place the monitor face down on the soft cloth.
2.Turn the Stand Base Lock through 90˚ to separate the Stand Base from the Stand
Body. 
 
3.Pull out the Stand Base to remove. 
If you cant release the Stand Base even the Locking Knob is at a release
position, Please push the indicated knob down and retry it.
Locking Knob
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
: Restart to select sub-menu
Press the MENUButton, then the main
menu of the OSD appears.
Main Menu

On Screen Display(OSD) Selection and Adjustment 
TRACKING
Main menu Sub menu Description
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu
CLOCK
PHASE
SHARPNESSTo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.

Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power on and the
power indicator red?
Is the power indicator
blinking?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Pressthe Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 

						

							27
Specifications                                                          W2243T
21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 
Visible diagonal size : 54.686cm
0.248 x 0.248 mm (Pixel pitch)
Display
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate Sync.
SOG (Sync On Green), DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 HzResolution
Plug&Play
On Mode:40W(Typ.)Sleep Mode
1 W
Off Mode
1 WPower
Consumption
Operating Conditions
Temperature 10