LG W1943c Users Guide

							A20
Display image is incorrect
❁ The screen color is
mono or abnormal.
❁ 
The screen blinks.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
•Make sure the video card is properly inserted in   
the slot.
•Set the color setting higher than 24 bits (true color)
at Control Panel -Settings .
• Check if the screen is set to interlace mode and if
yes,change it to the recommend resolution.
Troubleshooting
Have you installed the display driver?
❁ Have you installed
the display driver?
❁ Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
•Be sure to install the display driver from the display
driver CD (or diskette)that comes with your
display.Or,you can also download the driver from
our web site:http://www.lge.com.
•Make sure to check if the video card supports
Plug&Play function.
DownloadedPfromPManualMonitor.comPManuals 
						

							A21
Specifications W1943S/W1943C
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord 18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating 
Visible diagonal size: 47.0 cm
0.300*0.300 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green) 
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1360 x 768 @ 60 Hz
Recommend VESA 1360 x 768 @60 Hz
DDC 2AB
On Mode: 21W(Typ.)
Sleep Mode≤1 W
Off Mode≤1 W
With Stand Without Stand
Width 44.90 cm / 17.68 inches 44.90 cm / 17.68 inches
Height 36.08 cm / 14.20 inches 29.10 cm / 11.46 inches 
Depth 18.30 cm /   7.20 inches 5.56 cm /   2.19 inches
Net 2.92 kg (6.49 lbs)
Tilt -5˚~ 15˚
12V       2.0A 
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached (     ), Detached ( O )
Wall-outlet type
 
						

							A22
Specifications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
*9720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1360 x  76831.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
47.71270
60
75
60
75
75
60
75
60
* Recommend Mode
W1943S/W1943C
Indicator
On Mode
Sleep Mode
Off ModeRed
Flicker
Off
LED Color
MODE
 
						

							A23
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1. Place the monitor with its front facing downward on a soft cloth.
3.Install the Wall mount plate.
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.
Kensington Security Slot
Connected to a locking cable that can be
purchased separately at most computer stores.
2.Change your lock on the product as it follows and turn it in the arrow d\
irection.
 
						

							Digitally yours