LG Projector PW600G User Manual

21PREPARATION
How to Install the Projector On a Tripod
 yYou can install this projector using a camera tripod.  
As shown below, you can mount the projector instead of a camera on the tripod.
 yWhen stabilizing the tripod, we recommend using a locking bolt of standa\
rd size  
4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm.  
(If it is longer than the maximum allowed size, it may damage the proje\
ctor.)
+0633
The projector is  
connected to this part.Tripod
Bolt used to attach...

22PREPARATION
Caution when Using Pouch
*  Available for the PW800G model only.
The purpose of the pouch provided is to protect the exterior of the prod\
uct.
Please insert the back of the product first into the pouch as illustrated.
 NOTE
 yWhen using the product with the pouch on for a long period of time, the \
parts 
exposed to direct sunlight may change colors.
 yWhen using the product with the pouch on, the built-in speakers may soun\
d low in 
volume.  

23REMOTE CONTROL 
2194/76+0276
81
.7/2# )
#7 61
$.#0 -
: +6

566 +0)5 3/07
56+..
& .4
1-
4# 6+1
75$
*.2
-; 5-;5
REMOTE CONTROL
Open the lid at the back of the remote control and insert the 
batteries as described in the  instructions. Use new batteries.
POWER
Turns the projector on or off.
MUTE 
Mutes the sound of the projector.
INPUT 
Changes the input source.
VOLUME +, -
Adjusts the volume level.
PAGE , 
Moves to the previous/next page.
AUTO
Automatically adjusts the RGB-PC input image....

24REMOTE CONTROL 
 NOTE
 yWhen using the remote control, the optimal operation range is 
6 meters or less (left/right) and within a 30 degree arc of the 
remote control IR receiver.
 yIf a cable is connected to the back port, the optimal operating 
range is 3 meters or less (left/right) and within a 30 degree arc 
of the remote control IR receiver.
 yFor seamless operation, do not block the IR receiver.
 yWhen you carry the remote control in the portable bag, make 
sure that the buttons on the remote...

25USING THE PROJECTOR
USING THE PROJECTOR
Watching Projector
Turning on the Projector
The menu screen display in this owner's manual is an example to help use\
rs 
understand how to operate the product and may look different from the actual screen.
1 Connect the power cord correctly.
2 After waiting for a moment, press the POWER button on the remote control or the 
joystick button.
3 In the Language Selection screen, select a language....

26USING THE PROJECTOR
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the screen 
properly.
Adjust the focus of the image by rotating the Focus Ring to the left or \
right.
Make sure the product does not move when adjusting the focus.
Focus Ring
Watching Projector
1 In standby mode, press the POWER button to turn the projector on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while...

27USING THE PROJECTOR
MenuDescription
Cinema 
Zoom 1
Formats an image to the 
cinemascope ratio, 2.35:1. It 
ranges from 1 to 16.
Press the  or  button to 
zoom in or out of the image.
Press the  or  button to 
move the image.
 yIf you enlarge or reduce 
an image, the image may 
be distorted.
Using the Keystone 
Function
To prevent the screen image from 
becoming trapezoidal, Keystone adjusts 
the top and bottom width of the image 
if the projector is not set up at a right 
angle to the screen.
Because...

28USING THE PROJECTOR
Changing Input Device
To select an external input
Selects external input.
The illustration of the menu may differ 
from the actual screen on the product.
 yPress the INPUT button on the 
remote control to display the input 
selection screen. 
-  Connected inputs are displayed 
first. However, AV / Component / 
SCREEN SHARE input is always 
activated. 
( SCREEN SHARE is available for 
the PW800G model only.)
 ySelect an input signal using the 
remote control's INPUT button to...

29USING THE PROJECTOR
Blank Function
Using the Blank Function
This function may be effective when you 
need to draw attention during a meeting 
or training.
1 Press the BLANK button, and the 
screen is covered by the background 
color.  
You can change the background color 
by referring to Selecting a Blank 
Image.
2 Press any button to clear the blank 
function. 
To cover the screen temporarily, 
press the BLANK button on the 
remote control.  
Do not block the lens with any object 
while the projector...

30ENTERTAINMENT
ENTERTAINMENT
Using SCREEN SHARE
* This feature is available for the PW800G model only.
1 Set the external input of the projector to SCREEN SHARE.
2 Enable related SCREEN SHARE function on the device you wish to connect. \
3 Connect the Projector from the search list on the device you wish to con\
nect. 
(When you connect the projector to your laptop, input the PIN code show\
n on your 
display. The request for a PIN will be shown only at the initial connection.)
4 If the desired device...