LG Projector PH300S User Manual

							31MY	MEDIA
MY	MEDIA
Before	Using
Connecting	a	USB	Device
Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below.
 
USB flash Drive
Removing	a	USB	Device
1 Press the Q.MENU button.
2 Use the  or  button to move to USB	Device and press the OK button.
3 Select a USB to remove. Wait for confirmation that the USB device has stopped before removing the USB.

•	If detached early, an error may occur on the projector or the USB 
storage device.
•	 Once a USB device has been selected for removal, it can no longer 
be read. Remove the USB storage device and then re-connect it.
NOTE  
						

							32MY	MEDIA
Tips	for	using	a	USB	device
•	If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work.
•	Some USB storage devices may not work or may work incorrectly.
•	If you use a USB extension cable, the USB device may not be recognized or may not work properly.
•	Use only USB storage devices formatted with the Windows FAT32 or NTFS file system.
•	For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA.
•	It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supplied is not enough, the USB storage device may not be detected properly.)
•	It is recommended that you use USB flash drives of 32 GB or less and USB HDDs of 1 TB or less.
•	If a USB HDD with power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of the USB HDD.
•	Data in USB storage device can be damaged so be sure to back up important files to other devices. Data maintenance is the user's responsibility and the manufacturer is not responsible for data loss.  
						

							33MY	MEDIA
To	Use	My	Media
1 Press the SETTINGS button on the remote control.
2 Select MY	MEDIA.
Select desired file from the list. Watch the chosen file.
Sets play related settings by checking option during disk playback.
My	Media	supporting	file
•	Maximum data transmission rate: 20 Mbps (Mega bit per second)
•	External supported subtitle formats:*.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa,*.txt (TMPlayer), *.psb (PowerDivX)\
•	Internal supported subtitle formats: SRT/ASS/SSA (Supports internal subtitles generated from DivX6)
Video	Supported	Codec
Maximum resolution: 1920 x 1080 @ 30p  (only Motion JPEG 640 x 480 @ 30p)
ExtensionCodec
.asf,	.wmvVideoVC-1 Advanced Profile, VC-1 Simple and Main Profiles
AudioWMA Standard, WMA 9 Professional
.divx,	.avi
VideoDivX3.11, DivX4, DivX5, DivX6, XVID, H.264/AVC
AudioMPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital
.mp4,	.m4v, 	.mov
VideoH.264 / AVC, MPEG-4 Part 2
AudioAAC
.mkvVideoH.264 / AVC
AudioHE-AAC, Dolby Digital
.ts,	.trp,	.tp,	.mts,	.m2ts
VideoH.264 / AVC, MPEG-2, VC-1
AudioMPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, AAC
.vobVideoMPEG-1, MPEG-2
AudioDolby Digital, MPEG-1 Layer I, II, DVD-LPCM
.mpgVideoMPEG-1
AudioMPEG-1 Layer I, II  
						

							34MY	MEDIA
Supported	audio	files
File 	FormatItemInfo
MP3Bit	rate32 Kbps to 320 Kbps
Sampling	Rate32 kHz to 48 kHz
AC3Bit	rate32 kbps to 640 kbps
Sampling	Rate32 kHz, 44.1 kHz, 48 kHz
MPEGBit	rate32 kbps to 448 kbps
Sampling	Rate32 kHz to 48 kHz
AAC, 	HEAAC
Bit	rate24 kbps to 3844 kbps
Sampling	Rate8 kHz to 96 kHz
CDDABit	rate1.44 Kbps
Sampling	Rate44.1 kHz
LPCM
Bit	rate1.41 Mbps to 9.6 Mbps
Sampling	RateMulti Channel:   44.1 kHz, 88.2 kHz / 48 kHz, 96 kHzStereo: 176.4 kHz, 192 kHz  
						

							35MY	MEDIA
Watching	the	Videos
In the Movie	List, you can watch movies stored on the connected USB device.
Controls playback and sets options while viewing videos.
Tips	for	Playing	Video	Files
•	Some subtitles created by users may not work properly.
•	The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the video and subtitle files must have t\
he same name.
•	We do not support any stream that contains GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation).
•	Only H.264 / AVC profile level 4.1 and lower is supported.
•	Video files that exceed 50 GB (gigabyte) are not supported for playbac\
k. The file size limit is dependent on the encoding environment.
•	DTS audio codec is not supported.
Browsing	Movie	List
Play a video file stored from a connected device.
1 Connect a USB storage device.
2 Press the USB button.
3 Use the  , or  button to select Movie	List and press the OK button.
4 Use the  ,  ,  , or  button to select the file you want and press the OK button.
003800360025000300360037
0003
00330044004A0048 0003001400120014
00330044004A00480003 00140012001400270055004C005900480014 00270055004C005900480018
00270055004C005900480016 00270055004C005900480017
00270055004C005900480015
00330024002A00280003000300330044004A004800030026004B00440051004A0048003000520059004C00480003002F004C00560057
002500580057
00130014001D00160017001D00160016
002A005200030057
002A0052000300570028005B004C0057
	1		2		4		5	
	6	
	7		8		9	
	3	  
						

							36MY	MEDIA
No.Description
	1	
Thumbnails
Abnormal file
File not supported
	2	File List
	3	Moves to the upper level folder.
	4	Current page/Total no. of folder pages
	5	Displays the remaining battery life.
	6	Current page/Total no. of file pages
	7	Moves to the top level folder.
	8	Moves to the upper level folder.
	9	Exit Movie List.
5 Control playback by using the following buttons.
269F22072437Q.MENU003200530057 002B004C00470048
0028005B004C0057
ItemDescription
 Shows the current playing position. Use  ,  buttons to move forward or backward.
Stops playing and returns to Movie List.
Returns to normal playback.  
						

							37MY	MEDIA
ItemDescription
Pauses the media player.
If no button is pressed on the remote control for 10 minutes after pausing, the playback is restarted.
Displays in slow motion.
 Whenever this button is pressed, the playback speed is changed.: x2, x4, x8, x16, x32
You can use the Energy Saving mode.
OptionA pop-up window will appear.
HideHides the playback bar. Press the OK button to make it appear.
ExitReturns to the Movie List screen.
Options	for	Movie	List
1 Press the Q.MENU button.
2 Use the  or  button to move to a desired option and press the OK button.
3 Use the  ,  ,  , or  button to set up each item.
Set	Video	Play.
ItemDescription
Picture 	Size	
Selects the size of a playback screen.
•	Full: Files are played in full screen mode according to the aspect ratio of video.
•	Original: Displays the video in the original size.
Audio 	Language
Allows you to select the language you want for the file with multiple audio tracks. This option is not available if the file has only one audio track.  
						

							38MY	MEDIA
ItemDescription
Subtitle 	Language
The subtitle can be turned on or off.
•	Language: One of any of the available languages can be selected.
•	Code	Page: A character set used for a subtitle can be selected. By default, the subtitle is displayed in a language configured in OPTION	1	→ Language. -Sync: If a subtitle is not synchronized with its video, you can adjust its speed at 0.5 seconds unit. -Position: Moves the location of a subtitle. -Size: Changes the subtitle font size.
Repeat
Turns the repeat function On or Off.
When it is set to off, the next file can be played sequentially if the file name is similar.
Subtitle	Language
Subtitle	LanguageLanguage
Latin1English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan, Valencian
Latin2Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian
Latin4Estonian, Latvian, Lithuanian
CyrillicBulgarian, Macedonian, Russian, Ukranian, Kazakh
GreekGreek
TurkishTurkish
HebrewModern Hebrew
ChineseSimplified Chinese
KoreanKorean
ArabicArabic
Set	Video.
You can change video settings. (Refer to PICTURE Settings on page 52.)
Set	Audio.
You can change audio settings. (Refer to AUDIO Settings on page 57.)  
						

							39MY	MEDIA
Registering	the	DivX	code
Checks DivX Reg. Code for replaying DivX protected videos. Register at http://vod.divx.com.
Use Reg. Code to rent or purchase movies at www.divx.com/vod.
1 In the Settings menu, move to OPTION	1 and press DivX(R)	VOD.

00350048004A004C00560057
0027004800550048004A004C0056
0026004F005200560048
2 Press the  or  button to move to Registration and press the OK button.

003C00520058000300500058005600570053004F0044005C00030027004C0059003B000B0035000C00030053005500520057
00350048004A004C00560057 00350048004A004C00560057
0032002E
3 Check the DivX Registration	Code.

•	 Rented/purchased DivX files cannot be played if the DivX 
Registration Code of a different device is used. Use only the DivX 
Registration Code granted to this specific device.
•	 Converted files not conforming to the DivX Codec Standard may not 
play or may produce abnormal sound.
NOTE  
						

							40MY	MEDIA
To	deregister	the	DivX	code
Use the DivX deregistration code to deactivate the DivX DRM function.
1 In the Settings menu, move to OPTION	1 and press DivX(R)	VOD.
2 Use the  or  button to go to Deregistration and press the OK button.
3 Select Yes.

00310052
00310052
003C00480056
003C00480056
003C0052005800550003004700480059004C004600480003004C005600030044004F0055004800440047005C000300550048004A004C00560057
0024005500480003005C0052005800030056
000300030027004800550048004A004C00560057
0027004800550048004A004C0056 0026005200510057

•	What is DRM [Digital Rights Management]?
DRM technologies and services protect the interests and rights of 
copyright holders by preventing illegal use of digital content. Files 
can be played after the license is verified through an online method, 
etc.
NOTE