LG Projector Minibeam Nano PV150G User Manual

Owner's Manual
LG Minibeam Nano
DLP Projector
PV150G
Please read the safety information carefully before using this product.
www.lg.com  

2LICENSES
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX®...

3SAFETY	PRECAUTIONS
SAFETY	PRECAUTIONS
Please take note of safety instructions to prevent any potential acciden\
t or misuse of the product.
•	Safety precautions are given in two forms, i.e. WARNING and CAUTION. WARNING and CAUTION are understood to mean as follows: WARNING  Failure to follow the instructions may cause serious injury and even death  CAUTION  Failure to follow the instructions may cause minor injury to people or damage to the product
•	Read the owner's manual carefully and keep it...

4SAFETY	PRECAUTIONS
•	Do not allow children to cling to or climb up to the projector. -This may cause the projector to fall, causing injury or death.
•	Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. -This may result in fire due to the increase in internal temperature.
•	Do not place the product close to sources of steam, oil or oil mist, such as humidifiers and kitchen counters. -Failure to do so may result in fire, electric...

5SAFETY	PRECAUTIONS
Power
	WARNING
•	The appliance coupler is used as the disconnect device.  -Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible.
•	The grounding wire should be con nected. -Ensure that you connect the ground ing cable to avoid electric shock. If it is not possible to ground the unit, have a qualified electrician install a separate circuit 
breaker.Do not try to ground the projector by connecting it to telephone...

6SAFETY	PRECAUTIONS
•	Keep the power cord away from heating devices. -The wire's sheath may melt, which may result in fire or electric shock.
•	Place the projector where people will not trip over or tread on the power cord to protect the power cord and plug from any damage. -This may result in fire or electric shock.
•	Do not turn the projector on or off by plugging in the power plug or unplugging it from the wall outlet. (Do not use the power plug as a switch.) -This may result in electric shock or...

7SAFETY	PRECAUTIONS
When	in	Use
	WARNING
•	Do not place anything containing liquid on top of the projector such as a vase, flower pot, cup, cosmetics, or medicine; or ornaments, candles, etc. -This may result in fire or electric shock, or cause injury due to falling.
•	In the event that there is a heavy impact or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized ser  vice center. -This may result in electric 
shock.
•	Do not insert pieces of metal such as...

8SAFETY	PRECAUTIONS
•	Do not place the projector or its remote control with battery in an extremely high temperature environment. -This may result in fire.
	CAUTION
•	Do not place heavy objects on the projector. -It may fall down and cause personal injury.
•	Be careful not to allow any impact to the lens during transport.
•	Do not touch the lens of the projector. -The lens may be damaged.
•	Do not use any sharp tools on the projector, such as a knife or hammer, because this may damage the casing.
•	In...

9SAFETY	PRECAUTIONS
	CAUTION
•	Contact the sales representative or service center for internal cleaning of the projector about once a year. -If you do not clean the projector, dust will accumulate inside and may create a fire hazard or malfunction.
•	When cleaning plastic parts, such as the projector case, disconnect the product from the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, automobile or industrial polish, abrasives or wax,...

10SAFETY	PRECAUTIONS
•	Do not touch the lens; doing so can result in burns or damage to lens. Lens and unit may be HOT during and immediately after use. Use caution when handling unit, allowing for proper cool down.
•	Only use a grounded electrical outlet.
•	Do not insert anything into or cover up the exhaust vents. -This may result in fire or electric shock.
•	Follow all maintenance guidelines for optimal use; service only at an authorized service center.
•	Lamp contains mercury and as such must be...