LG Projector Laser TV User Manual
Here you can view all the pages of manual LG Projector Laser TV User Manual. The LG manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
91Serial Communication Function Command Reference List Command 1Command 2Data (Hexadecimal) 01. POWERka00 - 01 02. Aspect Ratiokc* 03. Blank Imagekd00 - 01 04. Contrastkg00 - 64 05. Brightnesskh00 - 64 06. Colorki00 - 64 07. Tintkj00 - 64 08. Sharpnesskk00 - 32 09. OSD Controlkl00 - 01 10. Key Lockkm00 - 01 11. Color Temperatureku00 - 04 (excluding 03) 12. Black Levelnm00 - 01 13. Energy Savingnp00 - 02 14. Auto configurationju01 15. Inputxb* 16. KeymcKey Code 17. Picture Modens00 - 05 18. Muteke00 - 01...
Page 92
![Page 92
92Serial Communication Function
01. Power (Command: ka)02. Aspect Ratio (Command: kc)
03. Blank Image (Command: kd)
⇒ Powers the set on/off.
Transmission
[k][a][][Set ID][][Data][Cr]
Data00:Power Off
01:Power On
Ack
[a][][Set ID][][OK][Data][x]
Data00:Power Off
01:Power On
⇒ To Show Power On(Only working when the Laser TV is turned on)
Transmission
[k][a][][Set ID][][FF][Cr]
Ack
[a][] [Set ID][][OK][Data][x]
Data01:Power On
⇒ As with other functions, if data is transmitted as ‘0xFF‘ in the above format,...](http://img.usermanuals.tech/thumb/47/99240/w300_projector_manual_7324_d-91.png "Page 92
92Serial Communication Function
01. Power (Command: ka)02. Aspect Ratio (Command: kc)
03. Blank Image (Command: kd)
⇒ Powers the set on/off.
Transmission
[k][a][][Set ID][][Data][Cr]
Data00:Power Off
01:Power On
Ack
[a][][Set ID][][OK][Data][x]
Data00:Power Off
01:Power On
⇒ To Show Power On(Only working when the Laser TV is turned on)
Transmission
[k][a][][Set ID][][FF][Cr]
Ack
[a][] [Set ID][][OK][Data][x]
Data01:Power On
⇒ As with other functions, if data is transmitted as ‘0xFF‘ in the above format,...")
92Serial Communication Function 01. Power (Command: ka)02. Aspect Ratio (Command: kc) 03. Blank Image (Command: kd) ⇒ Powers the set on/off. Transmission [k][a][][Set ID][][Data][Cr] Data00:Power Off 01:Power On Ack [a][][Set ID][][OK][Data][x] Data00:Power Off 01:Power On ⇒ To Show Power On(Only working when the Laser TV is turned on) Transmission [k][a][][Set ID][][FF][Cr] Ack [a][] [Set ID][][OK][Data][x] Data01:Power On ⇒ As with other functions, if data is transmitted as ‘0xFF‘ in the above format,...
Page 93
![Page 93
93Serial Communication Function
04. Contrast (Command: kg)06. Color (Command: ki)
05. Brightness (Command: kh)07. Tint (Command: kj)
⇒ Adjusts the screen contrast.
Transmission
[k][g][][Set ID][][Data][Cr]
DataMin: 0H - Max: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[g][][Set ID][][OK][Data][x]
DataMin: 0H - Max: 64H
⇒ Adjusts the screen color.
Transmission
[k][i][][Set ID][][Data][Cr]
DataMin: 0H - Max: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack...](http://img.usermanuals.tech/thumb/47/99240/w300_projector_manual_7324_d-92.png "Page 93
93Serial Communication Function
04. Contrast (Command: kg)06. Color (Command: ki)
05. Brightness (Command: kh)07. Tint (Command: kj)
⇒ Adjusts the screen contrast.
Transmission
[k][g][][Set ID][][Data][Cr]
DataMin: 0H - Max: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[g][][Set ID][][OK][Data][x]
DataMin: 0H - Max: 64H
⇒ Adjusts the screen color.
Transmission
[k][i][][Set ID][][Data][Cr]
DataMin: 0H - Max: 64H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack...")
93Serial Communication Function 04. Contrast (Command: kg)06. Color (Command: ki) 05. Brightness (Command: kh)07. Tint (Command: kj) ⇒ Adjusts the screen contrast. Transmission [k][g][][Set ID][][Data][Cr] DataMin: 0H - Max: 64H (* Transmitted in hexadecimal code) * See the data structure. Ack [g][][Set ID][][OK][Data][x] DataMin: 0H - Max: 64H ⇒ Adjusts the screen color. Transmission [k][i][][Set ID][][Data][Cr] DataMin: 0H - Max: 64H (* Transmitted in hexadecimal code) * See the data structure. Ack...
Page 94
![Page 94
94Serial Communication Function
08. Sharpness (Command: kk)
⇒ Adjusts screen sharpness.
Transmission
[k][k][][Set ID][][Data][Cr]
DataMin: 0H - Max: 32H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[k][][Set ID][][OK][Data][x]
DataMin: 0H - Max: 32H
09. OSD Control (Command: kl)
10. Key Lock (Command: km)
11. Color Temperature
(Command: ku)
⇒ Selects OSD On/Off.
Transmission
[k][l][][Set ID][][Data][Cr]
Data00:OSD selection mode off
01:OSD selection mode on
Ack
[l][][Set...](http://img.usermanuals.tech/thumb/47/99240/w300_projector_manual_7324_d-93.png "Page 94
94Serial Communication Function
08. Sharpness (Command: kk)
⇒ Adjusts screen sharpness.
Transmission
[k][k][][Set ID][][Data][Cr]
DataMin: 0H - Max: 32H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[k][][Set ID][][OK][Data][x]
DataMin: 0H - Max: 32H
09. OSD Control (Command: kl)
10. Key Lock (Command: km)
11. Color Temperature
(Command: ku)
⇒ Selects OSD On/Off.
Transmission
[k][l][][Set ID][][Data][Cr]
Data00:OSD selection mode off
01:OSD selection mode on
Ack
[l][][Set...")
94Serial Communication Function 08. Sharpness (Command: kk) ⇒ Adjusts screen sharpness. Transmission [k][k][][Set ID][][Data][Cr] DataMin: 0H - Max: 32H (* Transmitted in hexadecimal code) * See the data structure. Ack [k][][Set ID][][OK][Data][x] DataMin: 0H - Max: 32H 09. OSD Control (Command: kl) 10. Key Lock (Command: km) 11. Color Temperature (Command: ku) ⇒ Selects OSD On/Off. Transmission [k][l][][Set ID][][Data][Cr] Data00:OSD selection mode off 01:OSD selection mode on Ack [l][][Set...
Page 95
![Page 95
95Serial Communication Function
12. Black Level (Command: nm)14. Auto Configure (Command: ju)
15. Input Select (Command: xb)
13. Energy Saving (Command: np)
⇒ Adjusts the value of black level.
Transmission
[n][m][][Set ID][][Data][Cr]
Data00:Low01:High
(* Transmitted in hexadecimal code)
Ack
[m][][Set ID][][OK][Data][x]
Data00:Low01:High
⇒ Optimizes the screen automatically in PC input mode.
Transmission
[j][u][][Set ID][][Data][Cr]
Data01:To set
(* Transmitted in hexadecimal code)
Ack
[u][] [Set...](http://img.usermanuals.tech/thumb/47/99240/w300_projector_manual_7324_d-94.png "Page 95
95Serial Communication Function
12. Black Level (Command: nm)14. Auto Configure (Command: ju)
15. Input Select (Command: xb)
13. Energy Saving (Command: np)
⇒ Adjusts the value of black level.
Transmission
[n][m][][Set ID][][Data][Cr]
Data00:Low01:High
(* Transmitted in hexadecimal code)
Ack
[m][][Set ID][][OK][Data][x]
Data00:Low01:High
⇒ Optimizes the screen automatically in PC input mode.
Transmission
[j][u][][Set ID][][Data][Cr]
Data01:To set
(* Transmitted in hexadecimal code)
Ack
[u][] [Set...")
95Serial Communication Function 12. Black Level (Command: nm)14. Auto Configure (Command: ju) 15. Input Select (Command: xb) 13. Energy Saving (Command: np) ⇒ Adjusts the value of black level. Transmission [n][m][][Set ID][][Data][Cr] Data00:Low01:High (* Transmitted in hexadecimal code) Ack [m][][Set ID][][OK][Data][x] Data00:Low01:High ⇒ Optimizes the screen automatically in PC input mode. Transmission [j][u][][Set ID][][Data][Cr] Data01:To set (* Transmitted in hexadecimal code) Ack [u][] [Set...
Page 96
![Page 96
96Serial Communication Function
16. Key (Command: mc)
17. Picture Mode (Command: ns)
⇒ Sends a key code of the IR remote control.
Transmission
[m][c][][Set ID][][Data][Cr]
Data Key Codesee Page 98
(* Transmitted in hexadecimal code)
Ack
[c][] [Set ID][][OK][Data][x]
Data Key Code
⇒ Sets the picture mode.
Transmission
[n][s][][Set ID][][Data][Cr]
Data00:Vivid01: Standard
02:Cinema03: Game
04:Expert1
05:Expert2
(* Transmitted in hexadecimal code)
Ack
[b][] [Set ID][][OK][Data][x]
Data00:Vivid01: Standard...](http://img.usermanuals.tech/thumb/47/99240/w300_projector_manual_7324_d-95.png "Page 96
96Serial Communication Function
16. Key (Command: mc)
17. Picture Mode (Command: ns)
⇒ Sends a key code of the IR remote control.
Transmission
[m][c][][Set ID][][Data][Cr]
Data Key Codesee Page 98
(* Transmitted in hexadecimal code)
Ack
[c][] [Set ID][][OK][Data][x]
Data Key Code
⇒ Sets the picture mode.
Transmission
[n][s][][Set ID][][Data][Cr]
Data00:Vivid01: Standard
02:Cinema03: Game
04:Expert1
05:Expert2
(* Transmitted in hexadecimal code)
Ack
[b][] [Set ID][][OK][Data][x]
Data00:Vivid01: Standard...")
96Serial Communication Function 16. Key (Command: mc) 17. Picture Mode (Command: ns) ⇒ Sends a key code of the IR remote control. Transmission [m][c][][Set ID][][Data][Cr] Data Key Codesee Page 98 (* Transmitted in hexadecimal code) Ack [c][] [Set ID][][OK][Data][x] Data Key Code ⇒ Sets the picture mode. Transmission [n][s][][Set ID][][Data][Cr] Data00:Vivid01: Standard 02:Cinema03: Game 04:Expert1 05:Expert2 (* Transmitted in hexadecimal code) Ack [b][] [Set ID][][OK][Data][x] Data00:Vivid01: Standard...
Page 97
![Page 97
97Serial Communication Function
20. Channel Add/Del (Command: mb)
⇒ To add and delete the channels.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data00:Channel Delete
01:Channel Add
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
Data00:Channel Delete
01:Channel Add](http://img.usermanuals.tech/thumb/47/99240/w300_projector_manual_7324_d-96.png "Page 97
97Serial Communication Function
20. Channel Add/Del (Command: mb)
⇒ To add and delete the channels.
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data00:Channel Delete
01:Channel Add
Ack
[b][ ][Set ID][ ][OK/NG][Data][x]
Data00:Channel Delete
01:Channel Add")
97Serial Communication Function 20. Channel Add/Del (Command: mb) ⇒ To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data00:Channel Delete 01:Channel Add Ack [b][ ][Set ID][ ][OK/NG][Data][x] Data00:Channel Delete 01:Channel Add
Page 98
98Serial Communication Function Key NameKey CodeKey NameKey Code ∧0x40HOME0x7C ∨0x41MUTE0x09 >0x06CH ∧0x00
Page 99
99MAINTENANCE MAINTENANCE Clean your Laser TV to keep it in optimal condition. Cleaning Cleaning Cover Glass To remove dust or stains on the cover glass, use an air spray or use a swab or soft cloth to wipe the glass gently. Cleaning the Laser TV Case To clean the case of Laser TV, first unplug the power cord. To remove dust or stains, use only a dry, lint-free, soft cloth to polish the lens. Do not use alcohol, benzene, thinners or other chemicals, which may damage the case.
Page 100
100MAINTENANCE Updating the Software When a software update is required, run the software update to obtain the latest software version. You can manually check for and download any software updates. 1 On the HOME screen, press the SETTINGS button. 2 Select SUPPORT and go to Software Update. ItemDescription Software UpdateTurn on this option. When an update file is found, it is downloaded automatically. When the update file is completely downloaded, a software update window appears. Check Update...