LG Plasma TV PN6500 User Manual

							9
ENG
ENGLISH
9EXTERNAL CONTROL DEVICE SETUP
* Digital Terrestrial/Cable/Satellite
[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 01 : Low Channel data
 - 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data  02 : Input Source (Digital)
 - 10 : Terrestrial TV (DTV)
 - 20 : Terrestrial Radio (Radio)
 - 40 : Satellite TV (SDTV)
 - 50 : Satellite Radio (S-Radio)
 - 90 : Cable TV (CADTV)
 - a0 : Cable Radio (CA-Radio)
* Tune Command Examples:
1. Tune to the analogue terrestrial (PAL) Channel 10. 
Set ID = All = 00 
Data 00 & 01 = Channel Data is 10 = 00 0a 
Data 02 = Analogue Terrestrial TV = 00 
Result = ma 00 00 0a 00
2. Tune to the digital terrestrial (DVB-T) Channel 01. 
Set ID = All = 00 
Data 00 & 01 = Channel Data is 1 = 00 01 
Data 02 = Digital Terrestrial TV = 10 
Result = ma 00 00 01 10
3. Tune to the satellite (DVB-S) Channel 1000. 
Set ID = All = 00 
Data 00 & 01 = Channel Data is 1000 = 03 E8 
Data 02 = Digital Satellite TV = 40 
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
• For South Korea, North/Latin America except 
Colombia Model
 ►To tune channel to following physical/major/minor 
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor 
channel number. The Physical number is the actual 
digital channel number, the Major is the number that 
the channel should be mapped to, and the Minor is 
the sub-channel. Since the ATSC tuner automatically 
maps the channel from the Major / Minor number, 
the Physical number is not required when sending a 
command in Digital.
* Analogue Terrestrial/Cable
Data  00 : Physical Channel Number
 - Terrestrial (ATV) : 02~45 (Decimal: 2 ~ 69)
 -  Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data  01 & 02: xx (Don't care)
Data 03 & 04: xx (Don't care)
Data 05: Input Source (Analogue)
 - 00 : Terrestrial TV (ATV)
 - 01 : Cable TV (CATV)
* Digital Terrestrial/Cable
Data  00 : xx (Don't care)
[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Low byte Channel Data
 - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data  03 : High byte Channel Data
Data 04 : Low byte Channel Data
Data 05 : Input Source (Digital)
 - 02 :   
Terrestrial TV (DTV) – Use Physical Channel 
Number
 - 06 :   Cable TV (CADTV) – Use Physical Channel 
Number
 - 22 :   
Terrestrial TV (DTV) – Don’t Use Physical 
Channel Number
 - 26 :   Cable TV (CADTV) - Don’t Use Physical 
Channel Number
 - 46 :   Cable TV (CADTV) – Use Major Channel 
Number Only (One Part Channel)
Two bytes are available for each major and minor 
channel data, but usually the low byte is used alone 
(high byte is 0). 
* Tune Command Examples:
1.  Tune to the analogue cable (NTSC) channel 35. 
Set ID = All = 00 
Data 00 = Channel Data is 35 = 23 
Data 01 & 02 = No Major = 00 00 
Data 03 & 04 = No Minor = 00 00 
Data 05 = Analogue Cable TV = 01 
Total = ma 00 23 00 00 00 00 01
2.  Tune to the digital terrestrial (ATSC) channel 30-3. 
Set ID = All = 00 
Data 00 = Don’t know Physical = 00 
Data 01 & 02 = Major is 30 = 00 1E 
Data 03 & 04 = Minor is 3 = 00 03 
Data 05 = Digital Terrestrial TV = 22 
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
 ►To tune channel to following physical/major/minor 
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* Digital Terrestrial/Satellite
Data 00: xx (Don't care)  
						

							10
ENG
ENGLISH
10EXTERNAL CONTROL DEVICE SETUP
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
 - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]:   Minor/Branch Channel Number 
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
 - 02 : Terrestrial TV (DTV)
 - 07 : BS (Broadcasting Satellite)
 - 08 : CS1 (Communication Satellite 1)
 - 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital terrestrial (ISDB-T) channel 17-1.
Set ID = All = 00 
Data 00 = Don’t know Physical = 00 
Data 01 & 02 = Major is 17 = 00 11 
Data 03 & 04 = Minor/Branch is 1 = 00 01 
Data 05 = Digital Terrestrial TV = 02 
Total = ma 00 00 00 11 00 01 02
2. Tune to the BS (ISDB-BS) channel 30. 
Set ID = All = 00 
Data 00 = Don’t know Physical = 00 
Data 01 & 02 = Major is 30 = 00 1E 
Data 03 & 04 = Don’t Care = 00 00 
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
18.  Channel(Programme) Add/Del(Skip) 
(Command: m b)
 ►To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/ 
skip(DVB) or add.
19. Key (Command: m c)
 ►To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data  Key code - p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
20. Control Back Light (Command: m g)
• For LCD TV / LED TV
 ►To control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
 Control Panel Light (Command: m g)
• For Plasma TV
 ►To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
21. Input select (Command: x b) 
(Main Picture Input)
 ►To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 
 00 :   DTV
 02 :   Satellite DTV 
ISDB-BS (Japan)
 03 : ISDB-CS1 (Japan)
 04 : ISDB-CS2 (Japan)
 11 : CATV
01 : CADTV
10 : ATV
 20 : AV or AV121 : AV2
 40 : Component141 : Component2
 90 : HDMI1
 92 : HDMI3
91 : HDMI2
93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal. 
						

							11
ENG
ENGLISH
11EXTERNAL CONTROL DEVICE SETUP
22. 3D(Command: x t) (only 3D models) 
(Depending on model)
 ►To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01]
[ ][Data 02][ ][Data 03][Cr]
Data  Structure
[Data 00]    00 : 3D On 
01 : 3D Off 
02 : 3D to 2D 
03 : 2D to 3D
[Data 01]   00 : Top and Bottom 
01 : Side by Side 
02 : Check Board 
03 : Frame Sequential 
04 : Column interleaving 
05 : Row interleaving
[Data 02]   00 : Right to Left 
01 : Left to Right
[Data 03]   3D Effect(3D Depth): Min : 00 - Max : 14 
(*transmit by Hexadecimal code)
* If [Data 00] is 00 (3D On), [Data 03] has no 
meaning.
* If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 
01], [Data 02] and [Data 03] have no meaning.
* If [Data 00] is 03(2D to 3D), [Data 01] and [Data 02] 
have no meaning.
* All 3D pattern options ([Data 01]) may not be 
available according to broadcasting/video signal.
[Data 00][Data 01][Data 02][Data 03]
00OOX
01XXX
02XXX
03XXO
X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02]
[Data03][x]
[t][ ][Set ID][ ][NG][Data00][x]
23. Extended 3D(Command: x v) (only 3D models) 
(Depending on model)
 ►To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[Data 01][Cr]
[Data 00]    3D option 
00 : 3D Picture Correction 
01 : 3D Depth (3D Mode is Manual Only) 
02 : 3D Viewpoint 
06 : 3D Color Correction 
07 : 3D Sound Zooming 
08 : Normal Image View 
09 : 3D Mode (Genre)
[Data 01]   It has own range for each 3D option 
determined by [Data 00].
1) When  [Data 00] is 00 
00 : Right to Left 
01 : Left to Right
2) When  [Data 00] is 01, 02
Data     Min: 0 - Max: 14 (*transmit by Hexadecimal 
code)
Data value range(0 - 20) converts Viewpoint range 
(-10  -  +10) automatically (Depending on model)
3) When  [Data 00] is 06, 07, 08 
00 : Off 
01 : On
4) When [Data 00] is 09
00 : Standard
02 : Cinema
04 : Manual
01 : Sport
03 : Extreme
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
[v][ ][Set ID][ ][NG][Data00][x]