LG Plasma TV PN6500 User Manual

ENGLISH
\f\fASSEMBLING AND P\bEPA\bING
Lifting and moving the TV
When moving or lifting the TV, read the following to 
prevent the TV from being scratched or damaged and for 
safe transportation regardless of its type and size.y
y Avoid touching the screen at all times, as this 
may result in damage to the screen. 
 CAUTION
y
y It is recommended to move the TV in the box or 
packing material that the TV originally came in.
y
y Before moving or lifting the TV, disconnect the 
power cord and all cables.
y...

ENGLISH
\f2ASSEMBLING AND P\bEPA\bING
Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand 
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
1
2
3
Front
Stand Body
Stand Base
 C AUTION
y
y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to 
protect the screen from scratches.
y
y Make sure that the screws are fastened completely. (If they are not...

ENGLISH
\f3ASSEMBLING AND P\bEPA\bING
To detach the stand,
1
 NOTE
y
y Remove the stand before installing the TV on a 
wall mount by performing the stand attachment 
in reverse.
y
y When installing the wall mounting bracket, 
use the Protection cover. This will protect the 
opening from accumulating dust and dirt.
2
For 50PN4500, 50PN5300, 50PN6500
Protection cover
1
2
M5 x 161 E\b
M5 x 16 4 E\b   

ENGLISH
\f4ASSEMBLING AND P\bEPA\bING
Mounting on a table
1 Lift and tilt the TV into its upright position on a table.
  - Leave a 10 cm (4 inches) (minimum) space from 
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 
Connect the power cord to a wall outlet.
 C AUTION
y
y Do not place the TV near or on sources 
of heat, as this may result in fire or other 
damage.
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the 
angle of the TV to suit your...

ENGLISH
\f5ASSEMBLING AND P\bEPA\bING
Securing the TV to a wall (optional)
(Depending on model)
1  Insert and tighten the eye-bolts, or TV brackets and 
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position, 
remove the bolts first.
2  Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with 
a sturdy rope.
Make sure to keep the rope horizontal...

ENGLISH
\f6ASSEMBLING AND P\bEPA\bING
Tidying cables
1 Install the power cord holder and power cord. It will 
help prevent the power cable from being removed 
by accident.
(For 42PN4500)
Power cord holder
(For 50PN4500, 50/60PN5300, 50/60PN6500)
Power cord holder
2  Gather and bind the cables with the cable holder.
Cable holder
 C AUTION
y
y Do not move the TV by holding the cable holder 
and power cord holder, as the cable holders may 
break, and injuries and damage to the TV may 
occur.
 
C AUTION
y
y...

ENGLISH
\f7MAKING CONNECTIONS
Tidying cables
1 Install the power cord holder and power cord. It will 
help prevent the power cable from being removed 
by accident.
(For 42PN4500)
(For 50PN4500, 50/60PN5300, 50/60PN6500)
2  Gather and bind the cables with the cable holder.
 C AUTION
y
y Do not move the TV by holding the cable holder 
and power cord holder, as the cable holders may 
break, and injuries and damage to the TV may 
occur.
MAKING CONNECTIONS
You can connect various external devices to the TV....

ENGLISH
\f8MAKING CONNECTIONS
Connecting to a HD receiver, DVD Player or VC\b
Connect a HD receiver, DVD Player or VCR to the TV and select an appropriate input mode.
HDMI Connection
HDMI is the best way to connect a device.  
Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with 
the HDMI cable as shown in the following illustration.
 NOTE
y
y Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control)...

ENGLISH
\f9MAKING CONNECTIONS
AUDIO
VIDEO
L
R
COMPONENT   
INVIDEOAUDIO
L
PBPRRYVIDEOAUDIORL/MONOAV IN
AUDIO IN (PC )
Component Connection
Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV 
with the component cable as shown in the following illustration.
 NOTE
y
y If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. 
y
y Check to ensure each cable is matched with the...

ENGLISH
20MAKING CONNECTIONS
Composite Connection
Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV 
with the composite cable as shown in the following illustration.
 NOTE
y
y If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
C
OMPONENT   
INVIDEOAUDIO
LPBPRRYVIDEOAUDIORL/MONOAV IN
AUDIO IN (PC )
VIDEOMONO()AUDIO
L R
VC\b / DVD / Blu-\bay / HD Cable Box
YELLOWWHITE
\bED
YELLOWWHITE
\bED...