LG M5201c Ba Users Guide
Have a look at the manual LG M5201c Ba Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
20 Selecting the options Tile mode Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. Language Child lock ISM Method Set ID Tile Mode Power IndicatorTile Mode Tile ID H-Size V-Size H-Position V-Position ResetOff NaturalOff000 To set Demo It is used to enlarge the screen and also used with several products to view screen. • To use this function- Must be displayed with various other products. - Must be in a function that can be connected to RS-232C or RGB Out • Tile Mode - Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4) - 4 x 4 available. - Configuration of an integration screen is also available as well as configuration of One by one Display. ID 1ID 2 ID 3ID 4 - Tile mode (product 1 ~ 4) : r(2) x c(2) row column Selecting and Adjusting the Screen
21 Selecting and Adjusting the Screen ID 1ID 2 row column - Tile mode (product 1 ~ 2) : r(2) x c(1) Selecting the options column row - Tile mode (product 1 ~ 9) : r(3) x c(3) ID 1ID 2ID 3 ID 4ID 5ID 6 ID 7ID 8ID 9 column row - Tile mode (product 1 ~16) : r(4) x c(4) ID 1 ID 5 ID 9 ID 13ID 2 ID 6 ID10 ID 14ID 3 ID 7 ID 11 ID 15ID 4 ID 8 ID 12 ID 16
22 Selecting the options Power IndicatorUse this function to set the power indicator on the front side of the product to Onor Off. If you set Off, it will go off. If you set Onat any time, the power indicator will automatically be turned on. DemoUse it to see the difference between XD demo on and XD Demo off. (XD Demo function is not available in RGB PC/ HDMI/DVI PC mode.) Adjust the horizontal size of the screen taking into account the size of the bezel. Adjust the vertical size of the screen taking into account the size of the bezel. • H Size • V Size • ResetSelect the location of the Tile by setting an ID. • Tile ID Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. • H-Position Moving the screen position vertically.• V-Position Moving the screen position horizontally. Language Child lock ISM Method Set ID Tile Mode Power IndicatorTile Mode Tile ID H-Size V-Size H-Position V-Position ResetOff NaturalOff000 To set Demo Selecting and Adjusting the Screen The image is omitted by the distance between the screens to be naturally shown. • Natural
23 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position Auto config. Manual config. XGA Mode ARC Reset This button is for the automatic adjustment of the screen position, clock and phase. This function is suitable for analogue signal input only.Auto-config.(RGB PC input only) To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. This function is suitable for analogue signal input onlyClock To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. This function is suitable for analogue signal input only.Phase H-Position Moving the screen position vertically. Manual- config. XGA Mode (RGB-PC only). V-Position Moving the screen position horizontally. Auto config. Manual config. XGA Mode ARC Reset 1024x768 1280x768 1360x768 1366x768 If the picture isnt clear after auto adjustment and characters are still trembling, adjust the picture phase manually. * Phase, Clock function are not available in RGB DTV, Component, HDMI/DVI DTV.) For more improved or better picture quality, select the same mode corresponding to computer resolution.
24 Return Manual config. to the default factory settings.Reset To select the image size of the screen.ARC Adjusting Screen CLOCK/PHASE and Position When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally, in a nonlinear proportion, to fill the entire screen.Spectacle When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. (Europe an version only)Full When your AV receives the wide screen signal, it will be automatically changed to picture format to be sent.Original This pIcture format is 4:3 of general AV.4:3 You can enjoy movies (the picture format of 16:9) or general TV programmes thorough 16:9 mode. Programmes with 16:9 format are viewed naturally but 4:3 programmes are magnified on the left and right so that the screen is16:9 format.16:9 You can enjoy the picture format of 14:9 or general AV programmes through 14:9 mode. Programmes with 14:9 are viewed naturally, but 4:3 programmes are magnified on the top/bottom and left/right sides.14:9 You can enjoy movies on a vast screen through Zoom mode. The 4:3 programmes are magnified on the top/bottom and left/right sides so that screen is 16:9 format. The bottom and top of the picture may be lost.Zoom1, 2 SpectaclePC PC DTV DTVRGB HDMI/DVI AV Component Full Original 4:3 16:9 14:9 Zoom1 Zoom2 1:1 MODE ARC This pIcture format is 1:1 of general AV. (only RGB PC, HDMI/DVIPC)1:1 Selecting and Adjusting the Screen
25 • See if the power cord is properly connected to the outlet. • See if the power switch is turned on. • Adjust brightness and contrast again. • If the product is in power saving mode, move the mouse or press any key. • The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution RGB : 1920 x 1080 @60Hz HDMI/DVI : 1920 x 1080 @60Hz • The signal cable between PC and product is not connected. Check the signal cable. • Press the INPUT menu in the remote Control to check the input signal. No image is displayed Troubleshooting • The control locking function prevents unintentional OSD setting change due to careless usage. To unlock the controls, simultaneously press the Menu button and button for several seconds. (You cannot set this function using the remote control buttons. You can set this function in the product only.) The Controls Locked message appears when pressing the Menu button. Controls Locked message appears. • Install the product driver, which is provided with the product, or download it from the web site. (http://www.lge.com) • See if the plug&play function is supported by referring to the video card user manual. Did you install the driver? Unknown Product message appears when the product is connected. Note* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. * Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. Is the product power cord connected? Is the power indicator light on? Power is on, power indicatoris blue but the screen appears extremely dark. the power indicator amber? Does the Out of range message appear? Does the Check signal cable message appear?
26 Is the screen position wrong? Do thin lines appear on the background screen? Horizontal noise appears or the characters look blurred. The screen is displayed abnormally. The screen image looks abnormal. • D-Sub analog signal – Press the “AUTO” button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel – Display – Setting menu. • D-Sub analog signal – Press the “AUTO” button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. • D-Sub analog signal – Press the “AUTO” button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. • The proper input signal is not connected to the signal port. Connect the signal cable that matches with the source input signal. • If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. After-image appears when the product is turned off. After-image appears on the product. Troubleshooting
27 • Set the number of colors to more than 24 bits (true color) Select Control Panel – Display – Settings – Color Table menu in Windows. • Check the connection status of the signal cable. Or, re-insert the PC video card. • Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. Screen has poor color resolution (16 colors). Screen color is unstable or mono- colored. Do black spots appear on the screen? Screen color is abnormal. • See if the audio cable is connected properly. • Adjust the volume. • See if the sound is set properly. • Select the appropriate equalize sound. • Adjust the volume. No sound? Sound is too dull. Sound is too low. The audio function does not work. Troubleshooting • Is the sleep timer set? • Check the power control settings. Power interrupted. • CAUTION! FAN STOP! If the power is turned off after this message appears, it means that the fan is out of order. In this case, contact your local service center. The power suddenly turned off. The operation does not work normally.
28 LCD Panel Power Dimensions &Weight NOTE Information in this document is subject to change without notice. 52 inches (132.17 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Visible diagonal size: 132.17 cm 0.200 mm X 0.600 mm (Pixel Pitch) Rated Voltage AC 100-240V~ 50/60Hz 3.0A Power ConsumptionOn Mode : 400W Typ. Sleep Mode : ≤2W (RGB) / 4W(HDMI/DVI) Off Mode : ≤2W The product specifications can change without prior notice for product improvement. Width x Height x Depth 128.3 cm (50.51 inches) x 76.62 cm (30.17 inches) x 11.74 cm (4.62 inches) WH D Net 42.36 kg (93.39 lbs) Specifications
29 Specifications NOTE Information in this document is subject to change without notice. Max. ResolutionRGB : 1920 X 1080 @60Hz HDMI/DVI : 1920 X 1080 @60Hz Recommended ResolutionRGB :1920 X 1080 @60Hz (Full HD) HDMI/DVI :1920 X 1080 @60Hz (Full HD) Horizontal FrequencyRGB : 30 - 83 kHz HDMI/DVI : 30 - 83 kHz Vertical Frequency56 - 85 Hz Synchronization TypeSeparate/Composite/Digital 15-pin D-Subtype, HDMI (digital), S-Video, Composite Video, Component, RS-232C Operational ConditionTemperature: 5˚C ~ 35˚C , Humidity: 10% ~ 80% Storage ConditionTemperature: -20˚C ~ 60˚C , Humidity: 5% ~ 95% Video Signal Input Connector Environmental Conditions The product specifications can change without prior notice for product improvement.