LG M2762dp Owners Manual

141
APPENDIX

LCD Panel
S c r e e n   Ty p e
584.2 mm Wide (23 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size : 584.2 mm
P i x e l   P i t c h0.265 mm (H) x 0.265 mm (V)
Video Signal
Max.  Resolution1920 x 1080 @ 60 Hz
Recommended Resolution1920 x 1080 @ 60 Hz 
Horizontal  Frequency30 kHz to 83 kHz
Vertical  Frequency56 Hz to 75 Hz
Synchronization TypeSeparate Sync, Digital
Input ConnectorTV, D-Sub Analog, SCART, PC Audio In, component, HDMI
Power
R a t e d   Vo...

142
APPENDIX
APPENDIX
 ■The specifications shown above may be changed without prior notice for quality improvement.

LCD Panel
S c r e e n   Ty p e
686 mm Wide (27 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 686 mm
P i x e l   P i t c h0.3114 mm (H) x 3114 mm (V)
Video Signal
Max.  Resolution1920 x 1080 @ 60 Hz
Recommended Resolution1920 x 1080 @ 60 Hz 
Horizontal  Frequency30 kHz to 83 kHz
Vertical  Frequency56 Hz to 75 Hz
Synchronization TypeSeparate Sync,...

143
APPENDIX
IR CODES
• This feature is not available for all models.
Code (Hexa)   FunctionNote
95Energy Saving  R/C BUTTON 
08POWER   R/C BUTTON (POWER ON/OFF)
50TV / PC  R/C BUTTON
0BINPUT  R/C BUTTON
79RATIO  R/C BUTTON
F0TV/RAD  R/C BUTTON
45Q.MENU  R/C BUTTON
43MENU  R/C BUTTON
ABGUIDE  R/C BUTTON
40Up (ꕌ)  R/C BUTTON
41Down (ꕍ)  R/C BUTTON
07Left ()  R/C BUTTON
44OK(ꔉ)  R/C BUTTON
28BACK  R/C BUTTON
5BEXIT  R/C BUTTON
AA꘍  R/C BUTTON
02 ( + )  R/C BUTTON
03 ( - )  R/C BUTTON
1EFAV ( MARK )  R/C...

144
APPENDIX
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C Setup
Connect  the  RS-232C  (serial  port)  input  jack  to  an 
external  control  device  (such  as  a  computer  or  an 
A/V  control  system)  to  control  the  product’s  func-
tions externally.
Connect  the  serial  port  of  the  control  device  to  the 
RS-232C jack on the product back panel.
Note:  RS-232C  connection  cables  are  not  supplied 
with the product.
15
69
RS-232C Configurations
7-Wire Configurations (Standard RS-232C...

145
APPENDIX
Set ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. ► p.150
OPTIONOPTION
Menu Language  : English
Audio Language   : English
Subtitle Language    : English
Disabled Assistance
Country     :  
- -
Input Label
Set ID   : 1
Power Indicator   :On
▼
Menu Language   : English
Audio Language   : English
Subtitle Language    : English
Disabled Assistance
Country     :  
- -
Input Label
Set ID   : 1
Power Indicator   :On
▼
MoveMoveOKOK
Set ID    : 1                   ꔉ...

146
APPENDIX
APPENDIX
Communication Parameters
 ■Baud rate: 9600 bps (UART)
 ■Data length: 8 bits
 ■Parity : None
 ■Stop bit: 1 bit
 ■Communication code: ASCII code
 ■Use a crossed (reverse) cable.
Transmission
*  [Command 1]  :   First command to control the TV.
     (j, k, m or x)
*  [Command 2]   :   Second command to control the TV.
*  [Set ID]   :   You  can  adjust  the  set  ID  to  choose 
desired  monitor  ID  number  in  option 
menu. Adjustment range is 1 to 99. 
      When  selecting  Set  ID...

147
APPENDIX
04. Volume Mute (Command: k e)
 ►To control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
Transmission
Data 00 :  Volume mute on (Volume off)  01  :  Volume mute off (Volume on) 
[k][e][  ][Set ID][  ][Data][Cr]
Ack
[e][  ][Set ID][  ][OK/NG][Data][x]
02. Aspect Ratio (Command: k c) (Main Picture Size)
 ►To adjust the screen format. (Main picture format)
  You  can  also  adjust  the  screen  format  using  the 
Aspect Ratio in the Q.MENU. or PICTURE...

148
APPENDIX
APPENDIX
12. Remote control lock mode (Command: k m)
 ►To  lock  the  front  panel  controls  on  the  monitor  and 
remote control.
Transmission
[k][m][  ][Set ID][  ][Data][Cr]
Ack
Data 00 : Lock off01 : Lock on
* If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.* Local Power Key will work properly.
[m][  ][Set ID][  ][OK/NG][Data][x]
11. OSD Select (Command: k l)
 ►To select OSD (On Screen Display) on/off when control-...

149
APPENDIX
15. Balance (Command: k t)
 ►To adjust balance. You can also adjust balance in the AUDIO menu.
Transmission
Data  Min : 00 to Max : 64 * Refer to ‘Real data mapping 1’. See page 150.
[k][t][  ][Set ID][  ][Data][Cr]
Ack
[t][  ][Set ID][  ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)
 ►To adjust colour temperature. You can also adjust Colour 
Temperature in the PICTURE menu.
Transmission
Data  Min : 00  to  Max : 64
* Refer to ‘Real data mapping 1’. See page 150.
[x][u][  ][Set ID][...

150
APPENDIX
APPENDIX
23. Input select (Command: x b)
   (Main Picture Input)
 ►To select input source for main picture.
Transmission
Data  Structure
[x][b][  ][Set ID][  ][Data][Cr]
22. Back Light (Command: m g)
 ►To Control the back light.
Transmission
[m][g][  ][Set ID][  ][Data][Cr]
Ack
[g][  ][Set ID][  ][OK/NG][Data][x]
Ack
[b][  ][Set ID][  ][OK/NG][Data][x]
Data : data Min: 00 to Max: 64
21. Key(Command: m c)
 ►To send IR remote key code.
Transmission
Data Key code - Refer to page 147.
[m][c][...