LG M197wd Owners Manual

40
WATCHING TV /PROGRAMME CONTROL
If reception is poor, change Boosterto On.
When the signal is strong, select “
Off”.
BOOSTER(IN DIGITAL MODE ONLY)
Select SETUP.
2
Select Booster.
3
Select On orOff.
4
Save.
SETUPMoveOK
Auto tuning
Manual tuning
Programme Edit
Booster              : On
Software Update : On
Diagnostics
CI Information
Booster            : On
SETUPMoveOK
Auto tuning
Manual tuning
Programme Edit
Booster              : On
Software Update : On
Diagnostics
CI Information
Booster            :...

41
WATCHING TV /PROGRAMME CONTROL
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
SOFTWARE UPDATE
* When setting “Software Update”
- During Progress of a Software Update, please note the following:
• Power to the set must not be interrupted.
• The set must not be switched off. 
• The antenna must not be disconnected. 
• After Software Update, you can confirm the updated software version in Diagnostics menu.
Select SETUP.
2
Select Software Update....

42
WATCHING TV /PROGRAMME CONTROL
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software
Version.
This displays the information and signal strength of the tuned MUX.
This displays the signal information and service name of the selected MUX.
DIAGNOSTICS(IN DIGITAL MODE ONLY)
Select SETUP.
2
Select Diagnostics.
4
Display the Channel information.
3
Display Manufacturer, Model/Type, Serial Number and Software Version.
SETUPMoveOK
Auto tuning
Manual tuning...

43
WATCHING TV /PROGRAMME CONTROL
This function enables you to watch some encrypted services (paid services). If you remove the CI Module, you
cannot watch paid services.
When the module is inserted into the CI slot, you can access the module menu.
To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module
from the set. This may cause a malfunction. When the set is turned on after inserting a CI Module, you may not
have any sound output.
This may be...

44
WATCHING TV /PROGRAMME CONTROL
You can check which programmes are stored in the memory by displaying the programme table.
SELECTING THE PROGRAMME TABLE
Displayed in the
Locked Programme.
Display the PROGRAMME LIST.
1
Select a programme.
2Switch to the chosen programme number.
1
ADisplaying programme LIST
ASelecting a programme in the programme list
•You may find some blue programmes. These
have been set up to be skipped by auto 
programming or in the programme edit mode.
•Some programmes with the...

45
This system has an Electronic Programme Guide (EPG) to help navigate through all the possible viewing options.
The EPG supplies information such as programme listings, start and end times for all available services. In 
addition, detailed information about the programme is often available in the EPG (the availability and amount of
these programme details will vary, depending on the particular broadcaster).
This function can be used only when the EPG information is broadcasted by broadcasting...

46
Button Function in 8 Day Guide Mode
Button Function in Date Change Mode
Change EPG mode.RED RED
Change to the selected programme.
Select NOW or NEXT Programme.
Enter Timer Record/Remind setting
mode.YELL YELL
O O
W W
Enter Timer Record/Remind list mode.BLUE BLUE
Button Function in NOW/NEXT Guide Mode
Change EPG mode.RED RED
Enter Timer Record/Remind list mode.
BLUE BLUEEnter Date setting mode.
GREEN GREEN
Switch off Date setting mode.
GREEN GREENChange to the selected programme.
Change to the selected...

47
Button Function in Extended Description Box
- This function is available only when recording equipment that uses 8 pin recording signalling has
been connected to the DTV-OUT terminal, using a SCART cable.
Button Function in Record/Remind Setting Mode
Button Function in Schedule List Mode
Text Up/Down.
Function setting.
Select Schedule list.
Enter Timer Record/Remind setting
mode.YELL YELL
O O
W W
Change to Guide or Timer list mode.YELL YELL
O O
W W
Add new Manual Timer setting mode.YELL YELL
O O
W W...

48
PICTURE CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9 and Zoom1/2.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the
screen and remain visible.
You can adjust the enlarge proportion using 
D Ebutton.
This function works in the following signal.
PICTURE SIZE (ASPECT RATIO) CONTROL
• 1 16
6:
:9
9
The following selection will allow you to
adjust the picture horizontally, in linear 
proportion, to...

49
• O Or
ri
ig
gi
in
na
al
l
When your TV receives a wide screen signal, it
will automatically change to the picture 
format broadcast.
• 1 14
4:
:9
9
You can view a picture format of 14:9 or a
general TV programme in the 14:9 mode. The
14:9 screen is viewed in the same way as in
4:3, but is magnified to the left and right.
• Z Zo
oo
om
m1
1
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and 
bottom of the picture will...