LG M1950d Owners Manual

81
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
Command reference list
Communication Parameters
yyBaud	rate:	9600	bps	(UART)
yyData	length:	8	bits
yyParity	:	None
yyStop	bit:	1	bit
yyCommunication	code:	ASCII	code
yyUse	a	crossed	(reverse)	cable.
COMMAND1COMMAND2DATA(Hexadecimal)
01.	Powerka00	to	01
02.	Aspect	
Ratioxc(See	p.82)
03.	Screen	
Mutekd00	to	01
04.	Volume	
Muteke00	to	01
05.	Volume	
Controlkf00	to	64
06.	Contrastkg00	to	64
07.	Brightnesskh00	to	64
08.	Colourki00	to	64
09.	 Tintkj00	to	64
10....

82
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command	1]	:	First	command	to	control	the	set.(j,	
k,	m	or	x)
[Command	2]	:	Second	command	to	control	the	
set.
[Set	ID]	:	You	can	adjust	the	set	ID	to	choose	
desired	monitor	ID	number	in	option	
menu.	Adjustment	range	is	1	to	99.	When	
selecting	Set	ID	‘0’,	every	connected	
set	is	controlled.	Set	ID	is	indicated	as	
decimal	(1	to	99)	on	menu	and	as	Hexa	
decimal	(0x0	to	0x63)	on	transmission/...

83
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
04. Volume Mute (Command: k e)To	control	volume	mute	on/off.You	can	also	adjust	mute	using	the	MUTE	button	onremote	control.
Transmission		[k][e][	][Set	ID][	][Data][Cr]
Data		 00	:	Volume	mute	on	(Volume	off)	 01	:	Volume	mute	off	(Volume	on)
Ack		[e][	][Set	ID][	][OK/NG][Data][x]
05. Volume Control (Command: k f)To	adjust	volume.You	can	also	adjust	volume	with	the	VOLUME	buttons	on	remote	control.
Transmission		[k][f][	][Set	ID][	][Data][Cr]
Data	Min	:	00	to...

84
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
14. Bass (Command: k s)To	adjust	bass.You	can	also	adjust	bass	in	the	AUDIO	menu.
Transmission		[k][s][	][Set	ID][	][Data][Cr]
Data	Min	:	00	to	Max	:	64*	Refer	to	‘Real	data	mapping	’.	See	p.84
Acknowledgement		[s][	][Set	ID][	][OK/NG][Data][x]
15. Balance (Command: k t)To	adjust	balance.You	can	also	adjust	balance	in	the	 AUDIO	menu.
Transmission		[k][t][	][Set	ID][	][Data][Cr]
Data	Min	:	00	to	Max	:	64*	Refer	to	‘Real	data	mapping	’.	See	p.84
Acknowledgement...

85
ENGENGLISH
EXTERNAL CONTROL DEVICE SETUP
21. Key(Command: m c)To	send	IR	remote	key	code.
Transmission		[m][c][	][Set	ID][	][Data][Cr]
Data	Min	:	00	to	Max	:	64*	Data	Key	cod	-	See	p.78
Acknowledgement		[c][	][Set	ID][	][OK/NG][Data][x]
22. Back Light (Command: m g)To	Control	the	back	light.
Transmission		[m][g][	][Set	ID][	][Data][Cr]
Data	:	data	Min:	00	to	Max:	64
Acknowledgement		[g][	][Set	ID][	][OK/NG][Data][x]
23. Input select (Command: x b) (Main Picture Input)To	select	input	source	for	main...

UK Only
 

Make \bure to read the Safety \frecaution\b before 
u\bing the product.
Keep the Owner’\b Manual (CD) in an acce\b\bible 
place for future reference.
The model and \berial number of the SET i\b 
located on the back and one \bide of the SET. 
Record it below \bhould you ever need \bervice.
MO\fEL
SERIAL