LG LM7600 Led Lcd Tv Onwers Guide

							INSTALLATION PROCEdURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEM\bLING ANd PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local 
dealer where you purchased your product. The illustrations in this manual may differ from the actual 
product and item.
y
y Do not use any unapproved items to ensure the safety and product life span.
y
y Any damages or injuries by using unapproved items are not covered by the warranty. 
y
y In case of some model, the thin film on screen is a part of TV, So don’t take it off.
 CAUTION
y
y The items supplied with your product may vary depending on the model.
y
y Product specifications or contents of this manual may be changed without prior notice due to 
upgrade of product functions.
y
y For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 
inches) thick and 18 mm (0.7 inches) width.
y
y Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit 
into your TV's USB port.
B
AA
B
*A
  10 mm \b0.39 inches)
*B  
 1\f mm \b0.7 inches)
 NOTE
ENGLISH
11ASSEMBLING AND PREPARING   
						

							Magic Remote Control, 
Batteries (AA)
(See p.30)Owner’s manual
Cable holder 
(Depending on model)
(See p.19)
Stand Screws
8 EA, M4 x 20
(See p.17)Component video cable 
(See p.24)
Composite video cable 
(See p.24, 25)
Cinema 3D Glasses
The number of 3D glasses 
may differ depending on the 
model or country.Stand Body 
(See p.17)
Stand Base 
(See p.17)
Polishing cloth
(Depending on model)
Use this to remove dust 
from the cabinet.Power Cord 
(Depending on model)
Wall mount inner spacers  
4 EA  
(Depending on model)
(See p.20)
Desk-mount Screw
2 EA 
(Depending on model)
(See p.18) Bracket Screw
M4 x 8, 2 EA 
(Depending on model)
(See p.18)
Desk-mount Cable  
2 EA
(Depending on model)
(See p.18)
ENGLISH
12ASSEMBLING AND PREPARING  
						

							Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
AN-MR300 
Magic remote controlAG-F2**, AG-F3**
Cinema 3D glasses
The model name or design may be changed manufacturer’s circumstances or policies.
ENGLISH
13ASSEMBLING AND PREPARING   
						

							Parts and buttons
LAN(PC)RGB IN(RGB/HDMI-PC)AUDIO
ININOUTOPTICAL
DIGIT AL
AUDIO H/PIN/OU
T(RGB)AV1   
IN
HDD I\f USB Hub
USB A\b\b\bs
USB IN
1
1(ARC) 2 3 4(PC) 2
USB IN3
A\fTE\f\fA
/CABLE13/18V      
700mA MAx L\fB I\f
Satellite
INCOMPONENTAVPRPBY
VIDEOA
UDIO
SETTINGS
INPUT
OK
Speakers Screen
1  Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
Buttons
Power indicator Remote control and 
intelligent sensors
1
Button
Description
^ v Scrolls through the saved channels.
+  -    Adjusts the volume level.
072F  OK  Selects the highlighted menu option or confirms an input.
S  SETTINGS
Accesses the main menu, or saves your input and exits the menus.
m 
INPUT
Changes the input source.
 ( / I)
Turns the power on or off.
For LM6400/6450/6700/7600 series
ENGLISH
14ASSEMBLING AND PREPARING  
						

							SETTINGSINPUTOK
Speakers
Screen
Touch buttons2
Power indicator
Remote control and 
intelligent sensors1
For LM6200/6210/6250 series
1  Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2  All of the buttons are touch sensitive and can be operated through simple touch with your finger.
Touch Button Description
HScrolls through the saved channels.
HAdjusts the volume level.
OK  065C
Selects the highlighted menu option or confirms an input.
SETTINGS Accesses the main menu, or saves your input and exits the menus.
INPUT Changes the input source.
 
/ 
I Turns the power on or off.
ENGLISH
15ASSEMBLING AND PREPARING   
						

							Lifting and moving the TV
When moving or lifting the TV, read the following 
to prevent the TV from being scratched or 
damaged and for safe transportation regardless of 
its type and size.y
y Avoid touching the screen at all times, as 
this may result in damage to the screen. 
 CAUTION
y
y It is recommended to move the TV in the 
box or packing material that the TV originally 
came in.
y
y Before moving or lifting the TV, disconnect 
the power cord and all cables.
y
y When holding the TV, the screen should face 
away from you to avoid damage.
y
y Hold the top and bottom of the TV frame 
firmly. Make sure not to hold the transparent 
part, speaker, or speaker grill area.
y
y When transporting a large TV, there should 
be at least 2 people.
y
y When transporting the TV by hand, hold the 
TV as shown in the following illustration.
y
y When transporting the TV, do not expose the 
TV to jolts or excessive vibration.
y
y When transporting the TV, keep the TV 
upright, never turn the TV on its side or tilt 
towards the left or right.
ENGLISH
16ASSEMBLING AND PREPARING  
						

							Setting up the TV
Put your TV on a pedestal stand and mount the TV on a table or wall.
Attaching the stand 
3
2
4
5
 C AUTION
y
y When attaching the stand to the TV 
set, place the screen facing down on a 
cushioned table or flat surface to protect 
the screen from scratches.
y
y Tighten the screws firmly to prevent the 
TV from tilting forward.
1
Front
M4 x 20 4 EA
Stand Body
Stand Base
Top View
Protection pad 
\bDepending on model\4)
M4 x 20
4 EA
Wrapping bag \bDependi\4ng on model)
ENGLISH
17ASSEMBLING AND PREPARING   
						

							Mounting on a table
1 Lift and tilt the TV into its upright position on a 
table.
  - Leave a 10 cm (4 inches) (minimum) space 
from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
2 
Connect the power cord to a wall outlet.
 C AUTION
y
y Do not place the TV near or on sources 
of heat, as this may result in fire or other 
damage.
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust 
the angle of the TV to suit your view.
10
10
  NOTE
y
y When adjusting the angle of the TV, watch 
out for your fingers.
y
»
Personal injury may occur if hands or fingers are 
pinched. If the product is tilted too much, it may fall, 
causing damage or injury.
Securing the TV to a table
(Depending on model)
Fix the TV to a table to prevent from tilting 
forward, damage, and potential injury.
1  Connect the Desk-mount Cables to the Stand 
Base using the Bracket Screws.
2 Fix the Desk-mount Cables to a table using the 
Desk-mount Screws.
3 Once the TV is fixed, move the table close to 
the wall. Children may go in, causing injuries.
 

M4 x 8
2 EA
  WARNING
y
y To prevent TV from falling over, the TV 
should be securely attached to the floor/wall 
per installation instructions. Tipping, shaking, 
or rocking the TV may cause injury.
ENGLISH
1\fASSEMBLING AND PREPARING  
						

							Securing the TV to a table
(Depending on model)
Fix the TV to a table to prevent from tilting 
forward, damage, and potential injury.
1  Connect the Desk-mount Cables to the Stand 
Base using the Bracket Screws.
2 Fix the Desk-mount Cables to a table using the 
Desk-mount Screws.
3 Once the TV is fixed, move the table close to 
the wall. Children may go in, causing injuries.
 
  WARNING
y
y To prevent TV from falling over, the TV 
should be securely attached to the floor/wall 
per installation instructions. Tipping, shaking, 
or rocking the TV may cause injury.
Securing the TV to a wall \boptional)
1 
Insert and tighten the eye-bolts, or TV brackets 
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts 
position, remove the bolts first.
2  Mount the wall brackets with the bolts to the 
wall.
Match the location of the wall bracket and the 
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly 
with a sturdy rope.
Make sure to keep the rope horizontal with the 
flat surface.
 
  C AUTION
y
y Make sure that children do not climb on or 
hang on the TV.
 
NOTE
y
y   Use a platform or cabinet that is strong and 
large enough to support the TV securely.
y
y   Brackets, bolts and ropes are optional. You 
can obtain additional accessories from your 
local dealer.
Tidying cables
1 
Gather and bind the cables with the cable 
holder.
Cable holder
2 Fix the cable management clip firmly to the TV.
Cable management c\
lip
y
y Do not move the TV by holding the cable 
holder and cable management holder, as 
the cable holders may break, and injuries 
and damage to the TV may occur.
 CAUTION
ENGLISH
19ASSEMBLING AND PREPARING   
						

							 C AUTION
y
y Disconnect the power first, and then move 
or install the TV. Otherwise electric shock 
may occur.
y
y If you install the TV on a ceiling or slanted 
wall, it may fall and result in severe injury. 
Use an authorized LG wall mount and contact 
the local dealer or qualified personnel.
y
y   Do not over tighten the screws as this may 
cause damage to the TV and void your 
warranty. 
y
y   Use the screws and wall mounts that meet 
the VESA standard. Any damages or injuries 
by misuse or using an improper accessory 
are not covered by the warranty.
 
NOTE
y
y Use the screws that are listed on the VESA 
standard screw specifications. 
y
y   The wall mount kit includes an installation 
manual and necessary parts.
y
y   The wall mount bracket is optional. You can 
obtain additional accessories from your local 
dealer.
y
y   The length of screws may differ depending 
on the wall mount. Make sure to use the 
proper length.
y
y   For more information, refer to the manual 
supplied with the wall mount.
y
y When attaching a third-party wall mounting 
bracket to the TV, insert the wall mount 
inner spacers into the TV wall mount holes 
to move your TV in vertical angle. Please 
make sure not to use the spacers for LG wall 
mounting bracket.
Wall Mount Inner Spacer
Mounting on a wall
Attach an optional wall mount bracket at the rear 
of the TV carefully and install the wall mount 
bracket on a solid wall perpendicular to the 
floor. When you attach the TV to other building 
materials, please contact qualified personnel.
LG recommends that wall mounting be performed 
by a qualified professional installer.
10 c
m
10 cm
10 cm
10 cm
(4 inches)
Make sure to use screws and wall mount 
bracket that meet the VESA standard. Standard 
dimensions for the wall mount kits are described 
in the following table.
Model
32LM620042/47/55LM6200
47/55LM6250
47/55LM6400
60LM6450
42/47/55LM6700
47/55LM7600
VESA  200 x 200400 x 400
Standard screw M6M6
Number of screws 44
Wall mount bracket 
(optional) LSW200BX,
LSW220BX
LSW400BX,
LSW420BX
ENGLISH
20ASSEMBLING AND PREPARING