LG Lh T3530x Owners Manual

							1
ENGLISH
This lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons. 
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING:Do not install this equipment in a confined
space such as a book case or similar unit.
CAUTION: 
This product employs a Laser System.
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference. Should the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to
open the enclosure. Visible laser radiation when open.
DO NOT STARE INTO BEAM.CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owners manual to
be certain.
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement
part by an authorized servicer.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord 
exits the appliance.
To disconnect power from the mains, pull out the mains
cord plug. When installing the product, ensure that the
plug is easily accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be
disposed of separately from the municipal
waste stream via designated collection facilities
appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
4. For more detailed information about disposal of
your old appliance, please contact your city
office, waste disposal service or the shop
where you purchased the product.
CLASS  1   LASER  PRODUCT
KLASSE 1  LASER  PRODUKT
LUOKAN 1 LASER  LAITE
KLASS  1   LASER  APPARAT
CLASSE 1  PRODUIT   LASER   
CAUTIONRISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION: TO REDUCE THE RISK 
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
WARNING:TO PREVENT FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
Note:
The marking of product shall be on the exterior of the
apparatus
HT353SD-X2_DUZBLLK_ENG
 
						

							2
5.1 Speaker Setup
Make the following settings for the built-in 5.1 channel surround decoder.
1. Press ENTER and 5.1 Speaker Setup menu appears.
2. Use b/Bto select the desired speaker.
3. Adjust options using v/V/b/Bbuttons.
4. After setting, returns to the previous menu by pressing RETURN button.
Speaker selection
Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center),
Subwoofer (SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)]
Note:
Certain speaker settings are prohibited by the Dolby Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot change the settings.
Volume
Press b/Bto adjust the output level of the selected speaker. (-6dB ~ 6dB)
Distance
If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound
has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the
same time. 
Press b/Bto adjust the Distance of the selected speaker.
Test 
Press b/Bto test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in
the system.
Front Left (L) →Center →Front Right (R) →Rear Right (R) →Rear Left (L) →SubWoofer
QUICK SETUP GUIDE
Speaker System Connection
Connect the speaker wires the speaker terminals.
To obtain the best possible surround sound, adjust
the speaker parameters (volume, distance, etc.).
Notes:
 Be sure to match the speaker wires to the
appropriate terminal on the components, + to +
and – to –. If the cables are reversed, the
sound will be distorted and will lack bass.
 If you use front speakers with low maximum
input rating, adjust the volume carefully to avoid
excessive output on the speakers.
Be careful of the following 
Be careful to make sure children not to put  their
hands or any objects into the *speaker duct. 
*Speaker duct: A hall for plentiful bass sound on
speaker cabinet(enclosure).
 
						

							3
ENGLISH
Introduction
InstallationBefore Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Antenna Connection  . . . . . . . . . . . . . . . . . . . . . . . .4
Speaker System Connection  . . . . . . . . . . . . . . . . .4
Optional Equipment Connection  . . . . . . . . . . . . . .4
OperationOperate using the Front Panel  . . . . . . . . . . . . . . . .5
Operate using the Remote Control  . . . . . . . . . . .5-7
SetupInitial Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
General Operation  . . . . . . . . . . . . . . . . . . . . . . . . . .7
Language  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Audio   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Lock (Parental Control)  . . . . . . . . . . . . . . . . . . .7-8
Others  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Presetting the Radio Stations  . . . . . . . . .9
Playing an Audio CD or 
MP3/WMA/JPEG/DivX file
Playing an Audio CD or MP3/WMA file  . . . . . . . . . .9
Programmed playback  . . . . . . . . . . . . . . . . . . . . . .9
Viewing a JPEG file  . . . . . . . . . . . . . . . . . . . . . .9-10
Playing a DivX Movie file  . . . . . . . . . . . . . . . . . . .10
Additional features  . . . . . . . . . . . . . . . . . . . . . . . .10
ReferenceLanguage Codes  . . . . . . . . . . . . . . . . . . . . . . . . . .11
Area Codes  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . .12
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Before Use
About the  Symbol Display
“  ” may appear on your TV display during operation
and indicates that the function explained in this owner’s
manual is not available on that specific DVD video disc.
Symbol Used in this Manual
A section whose title has one of the following symbols is
applicable only to the disc represented by the symbol.
DVD and finalized DVD±R/RW
Audio CDs  MP3 files
WMA files   JPEG files  DivX files
Types of Playable DiscsIn addition, this unit can play a DVD-RW, DVD+RW, 
CD-G and CD-R or CD-RW that contains audio titles,
MP3, WMA, JPEG or DivX files.
Notes:
 Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW, DVD+RW)
disc itself, some CD-R/RW (or DVD-RW, DVD+RW)
discs may not be played on the unit.
 For DVD-R/RW Discs, only ones rewritten in video
mode and finalized are supported on this player.
 When there are a lot of data  in a disc, it may take
longer to be read on this player than on other model.
 Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
 Do not use irregularly shaped CDs (e.g., heart-shapedor octagonal). It may result in malfunctions.
Regional CodeThis unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled as the
same as the rear of the unit or “ALL”.
Notes on Regional Codes
If you try to play a DVD with a different regional code
from your player, the message “Check Regional Code”
appears on the TV screen.
DivXJPEGWMA
MP3ACD
DVD-V
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks
of Dolby Laboratories.
Manufactured under license from Dolby Laboratories.
Please ensure that the proper above notice is included in the
owner’s manual.
Manufactured under license under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and DTS Digital
Surround are registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All
Rights Reserved.
The making of unauthorized copies of copy-protected material,
including computer programs, files, broadcasts and sound
recordings, may be an infringement of copyrights and constitute
a criminal offence. This equipment should not be used for such
purposes.
Be responsible respect copyrights
 
						

							
4
TV Connection
Make one of the following connections, depending on the
capabilities of your existing equipment.
Tips:  Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
DVD/CD Receiver. Use one of the connections described
below.
  Please refer to the manuals of your TV, VCR, Stereo System
or other devices as necessary to make the best connections.
Caution:  
Make sure the DVD/CD Receiver is connected directly to the
TV. Select the correct AV input on your TV.
  Do not connect your DVD/CD Receiverto the TV via your
VCR. The DVD image could be distorted by the copy
protection system. 
SCART connectionConnect the EURO AV OUTPUT (TO TV) socket on the DVD/CD
Receiver to the corresponding jacks on the TV using the scart
cable  (T).
Component Video connection
Connect the COMPONENT VIDEO OUT jacks from the DVD/CD
Receiver to the corresponding jacks on the TV using a Y PB PR
cable  (C).
  If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD/CD
Receiver’s progressive scan output for higher video
resolution. 
  If your TV does not accept your resolution setting, abnormal
picture appears on the screen. Please read owner’s manual
for TV then set the resolution that your TV can accept. 
Composit Video connectionConnect the MONITOR jack from the DVD/CD Receiver to the
Video IN jack on the TV using the video  cable supplied (V).
Antenna Connection
Connect the supplied FM/AM antenna for listening to the radio.
  Connect the AM Loop aerial to the AM aerial connector.

 Connect the FM Wire aerial to the FM aerial connector.
Notes: 
 To prevent noise pickup, keep the AM Loop aerial away from
the DVD/CD Receiver and other components.
  Be sure to fully extend the FM wire aerial.

 After connecting the FM Wire aerial, keep it as horizontal as
possible.
Speaker System Connection
Connect the speaker wires the speaker terminals.
To obtain the best possible surround sound, adjust the speaker
parameters (volume, distance, etc.).
Notes:
  Be sure to match the speaker wires to the appropriate
terminal on the components, + to + and – to –. If the cables
are reversed, the sound will be distorted and will lack bass.
  If you use front speakers with low maximum input rating,
adjust the volume carefully to avoid excessive output on the
speakers.
Optional Equipment Connection
Connect a VCR to the AUX IN connectors.
Installation

Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.

Be careful of the following 
Be careful to make sure children not to put  their hands or
any objects into the *speaker duct. 
*Speaker duct: A hall for plentiful bass sound on speaker
cabinet(enclosure).
 
						

							5
ENGLISH
Operate using the Front Panel
1. (
/[)POWER buttonLights red when the receiver is in Standby mode (off)2. DISC Tray    
3. DISPLAY Window
4. Remote Sensor:
RemoteControl Operation Range
Distance:About 23 ft (7 m) from the front of the Remote
Sensor
Angle:About 30° in each direction in front of the Remote
Sensor
5. OPEN/CLOSE   Opens and closes the disc tray.6. • (B/X)PLAY/PAUSE• FUNC.(-)Press and hold down this button
about 3 seconds, then press repeatedly to select other
function.
(DVD/CD → →
USB → →
AUX→ →
TV -AUDIO
→ →
PORTABLE→ →
FM → →
AM) 
7.VSM   Press VSMto set the VIRTUAL sound.• 3D STEREO   Realtime 3D positioned sound rendering
technology with stereo sources, optimized for stereo speakers.
Listeners may experience amazing virtual surround effects
with their own multimedia players.
• Multichannel sound   The Multichannel sound changes the
sound in 5.1 ch into a virtual one in the 10.1 ch so that it
provides such a feeling that you listen to the sound
simultaneously from the right and left speakers and center
speaker.
8. TUNING(-/+)/SKIP/SCAN(. .
/> >
)For manual tuning, press TUNING (-/+) repeatedly.
For automatic tuning, press and hold TUNING (-/+) for about
two seconds on the front panel.
9. VOLUME controller   Adjusts speaker volume.10. MIC 1/MIC 2    Connect a microphone to MIC  1 or MIC 2
or  to both sockets.( 6.3mm)- If you connect a MIC into the unit during play the DTS source ,
sound output will be decrease.
- MIC function support in DVD/CD or USB mode.
- MIC  connecting state,sound is outputted to all channel
speakers.
-When you play  a DivX file, voice of Microphone is not inputted.
11. USB Port  Connect the USB port of a USB Memory 
(or MP3 player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit
1. Choose a different function mode or press STOP (x) twice in
a row.      
2. Remove the USB device from the unit.
12. PORT. IN JackUsing PORTABLE device 
When you connect a portable music playing device to the 
PORT. IN jack on this device by using a ( 3.5mm)mini stereo
cable (not supplied), you can here the sound being outputted
from the portable device through the speaker.
13. STOP
Operation
123
45678
9
1010111112121313
 
Don’t extract the USB device while operating.
 
Music files (MP3/WMA), image files (JPEG) and Video files can
be played.
 
This unit cannot use a USB HUB.
 
Recommended Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart Media Card
(SMC), Memory Stick (MS), Secure Digital Card (SD), Multimedia
Card (MMC), Memory Stick Pro (MS-Pro)
- Compatible with: FAT16, FAT32
- Only use the memory cards recommended.
 
Devices which require additional program installation when you
have connected the unit to a computer are not supported.
 
In case of a USB HDD, make sure to connect an auxiliary power
cord to the USB HDD for proper operation. Up to 2 primary
partitions of a drive are supported. If there is an extension
partition, up to four partitions are supported.
 
If the drive of USB device is two or more, a drive folder is
displayed on the screen. If you want to move to the initial menu
after you select a folder, press RETURN.
 
Digital cameras and mobile phones are not supported.
 
Only USB 1.0/ 1.1supported.(In case USB 2.0 is inserted  in to the
player,if operates at the  same speed as that of USB 1.1.)
Operate using the Remote Control1. POWER   
2. MUTE  Press MUTE to mute your unit. You can mute your
unit in order, for example, to answer the telephone.
3. • FUNCTION : (DVD/CD → FM → AM )• INPUT : (USB → AUX → →
TV -AUDIO→ PORTABLE )
4. SLEEPYou can set the DVD/CD Receiver to turn off automatically
at a specified time.
1.Press SLEEP to set the desired sleep time. The sleep time
appears in the display window.
2.Each time you press SLEEP the setting changes in the
following order.
(DIMMER ON)→SLEEP 180 →150 →120→90 →80 →70 →60→50 →40 →
30 →20 →10 →(DIMMER  OFF)
Note:You can check the remaining time before the DVD/CD Receiver
turns off.
Press SLEEP. The remaining time appears in the display window.
5. RETURNRemoves the setup menu.6. 0-9 numerical buttons   Selects a service, program number
directly or selects numbered options in a menu.
1
34
5
7
8
9
6
D .SELVO C AL FA D E RHT SPKCLEAR
KEY CO N.
S-TITLE R D S PTY R EPEAT
2
 
						

							6
7.EQ (EQUALIZER Effect)
8.VSM   Press VSMto set the VIRTUAL sound.
You can enjoy surround sound simply by selecting one of the
pre-programmed sound fields according to the program you want
to listen to . Press VSM button repeatedly. 
9.ECHO VOL.(V/v )Adjusts echo volume10.MIC VOL.(V/v ) Adjusts microphone volume
- When you connect MIC the sound will be output into all channel
11. SETUPAccesses or removes setup menu 12. MENU  Accesses the menu on a DVD disc.13. DISPLAY1. Press DISPLAY to show various information about the disc
loaded on-screen.The displayed items differ depending on
the disc type or playing status. 
2. You can select an item by pressing v/ Vand change or
select the setting by pressing b/ B.
14. TITLE  If the current DVD title has a menu, the title menu
appears on the screen. Otherwise, the disc menu may
appear.
15. b/B/v/V(left/right/up/down)Selects an option in the
menu.
16. SCAN(bb/BB) During playback, press SCAN(mor
M) repeatedly to select the required scan speed.
DVD,DivX : bb, bbb, bbbb, bbbbb,
or BB, BBB,
BBBB, BBBBB
WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8)
 
 SLOW(bb/BB)  In the pause mode, press SLOW 
(mor M) to select required speed.
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
DivX : T (1/2, 1/4, 1/8, 1/16)
17. 
 
 SKIP (. .
/ > >
)During playback, press SKIP (.
or >) to go to the next chapter/track or to return to the
beginning of the current chapter/track. Press SKIP.
twice briefly to step back to the previous chapter/track.
18. VOLUME (+/-)  Adjusts speaker volume.19. • PLAY(B)- To Play disc and file- 1.5 speed playback
You can quickly enjoy a movie and music.
The 1.5 speed allows you to watch the pictures and listen to the
sound quicker than playing at a normal speed on the disc.
1. Press the PLAY button during the normal playback. The
screen will appear at 1.5 speed with sound .
2. To return to normal PLAY, press PLAY
- If you insert MIC to unit during 1.5 speed playback,it will
be return to normal speed or when a MIC is connected into
the unit 1.5 speed playback not operate.
- FM mode state,selects MONO or STEREO by pressing
on the remote control PLAY button 
• PAUSE/STEP (X) During playback, press Xto pause
playback. 
Press Xrepeatedly to play Frame-by-Frame. 
• STOP (x x
)
20. PROG./MEMO.  Accesses or removes Program menu.
Enter a radio station’s frequency into the tuner.
21. REC(z)- USB direct recording This function enable you to record music to a connected
USB storage device from AUDIO CD .
Before USB recordings, read the notes on the page 13.
1.Insert a USB device suffiicent free space  to the USB port on
the unit. 
2.Select DVD/CD to record from by pressing FUNCTION button
on the remote control.
AUDIO CD - Press
v/ V to select the track/file you want 
3. Press REC (z) on the remote control to start record.
“USB REC” will start flashing on the display.
- When you start the USB recording ,Recording percentage rate
will be appear on the display window during the recording .
4. File will be stored to CD_REC in a format “TRK_001.mp3”
5. To stop the recording press STOP.
DivXDVD
ALL
ACDWMAMP3DVD
11
1213
14 15
1718
19 20
21
25 22
23
2416
EQ
VSM
CLEARCLEAR
FUNCTIONINPUTSLEEPRETURN
S-TITLES-TITLEREPEAREPEAT
ENTER   Acknowledges the menu selection.PRESET(v/V) Press PRESET +/- repeatedly to select the
preset station you want.
Each time you press the button, the DVD/CD Receiver tunes in
one preset station at a time.
Preset radio stations in the DVD/CD Receiver’s memory first
(see “Presetting radio stations”)
TUN.(-/+) (b/B) For manual tuning, press TUN (-/+)
repeatedly.
For automatic tuning, press and hold TUN. (-/+) for about two
seconds on the front panel.
• Title (Track) –Current title (or track) number/total number of
titles (or tracks).
• Chapter –Current chapter number/ total number of chapters. • Time – Elapsed playing time. • Audio – Selected audio language or channel. • Subtitle – Selected subtitle. • Angle – Selected angle/ total number of angles. • Sound – Selected sound mode. 
Note: If a button is not pressed for a few seconds, the on-
screen display disappears.
- 2 Ch Source:BYPASS →VIRTUAL→ON STAGE →PLII
MOVIE → PLII MUSIC → PLII MTRX→ BYPASS...
- 5.1Ch Source: BYPASS →VIRTUAL→ BYPASS
You can choose 7 fixed sound impressions.Each time you press the
button the setting changes in the display window as shown below. 
• AUTO EQ :AUTO EQ operates only in the MP3 files which
include the Tag information in the DVD or USB function. 
( ID3 Tag is operated.ver.1 only.) 
-WMA file operates to Normal EQ  regardless of Tag information. 
NORMAL→ NATURAL→(AUTO EQ )→ POP→  CLASSIC → ROCK
→JAZZ → NORMAL..
 
						

							7
ENGLISH
Initial Settings 
By using the Setup menu, you can make various adjustments to
items such as picture and sound. You can also set a language
for the subtitles and the Setup menu, among other things. For
details on each Setup menu item, see the pages 8 to 9.
aLANGUAGE - Menu Language/ Disc Audio / 
Subtitle / Menu
bDISPLAY - TV Aspect / Display Mode / Progressive Scan /
TV output select 
cAUDIO - 5.1 Speaker Setup/ Dynamic Range Control
(DRC)/ Vocal / Semi Karaoke
dLOCK (Parental Control) - Rating / Password / Area Code
eOTHERS - PBC / DivX(R)  VOD / REC Bitrate
To display and exit the Menu:Press SETUP to display the
menu. A second press of SETUP will take you back to initial
screen.
To go to the next level: Press Bon the Remote Control.
To go back to the previous level:Press bon the Remote
Control.
GENERAL OPERATION1. Press SETUP. The Setup menu appears.  
2. Use v/Vto select the desired option then press Bto move
to the second level. The screen shows the current setting for
the selected item, as well as alternate setting(s). 
3. Use v/Vto select the second desired option and then press
Bto move to the third level.  
4.
Use v/Vto select the desired setting then press ENTER to
confirm your selection. Some items require additional steps.  
5. Press SETUP or PLAY to exit the Setup menu.
LANGUAGEMenu Language: Select a language for the Setup menu and the
on-screen display.
Disc Audio / Subtitle / Menu:
Select the language you prefer for the audio track 
(disc audio), subtitles, and the disc menu.Original – Refers to the original language in which the disc was
recorded.
Other – To select another language, press numeric buttons and
then ENTER to enter the corresponding 4-digit number
according to the language code list on the page 11. If you enter
the wrong language code, press CLEAR.
DISPLAYTV Aspect 4:3 – Select when a standard 4:3 TV is connected.16:9 – Select when a 16:9 wide TV is connected.
Display Mode: The display Mode setting works only when the
TV Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with bands on the upper
and lower portions of the screen.
Panscan
– Automatically displays the wide picture on the entire
screen and cuts off the portions that do not fit.
Progressive Scan
Progressive Scan Video provides the high quality pictures with
less flickering. If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set [Progressive Scan] to [On]. Press
ENTER. 
- If you not press ENTER within 10 seconds it will be [OFF]. - If you have no progressive scan TV ,in the state progressive
scan [on] will not appear the screen.
(so then,press and hold STOP button on the remote control
5seconds. it will be change [OFF].)
TV Output Select – Select an option according to the TV
connection type. [YPbPr]: When your TV is connected with the
COMPONENT/PROGRESSIVE SCAN jacks on the unit. [RGB]:
When your TV is connected with the SCART jack.
- When connected by RGB, COMPONENT OUT not operate.
- In Progressive scan [on] state, TV Output select  mode is
inactivate.
AUDIOEach DVD disc has a variety of audio output options. Set the
receiver’s AUDIO options according to the type of audio system
you use. 
5.1 Speaker SetupMake the following settings for the built-in 5.1 channel surround
decoder.
1. Press ENTER and 5.1 Speaker Setup menu appears.
2. Use b/Bto select the desired speaker.
Setup
abcd
e 22. SUBTITLE 
During playback ,S-TITLE repeatedly to select a desired
subtitle language .
23. REPEAT  During playback, press REPEAT repeatedly to
select a desired repeat mode. 
DVD Video discs: Chapter/Title/Off 
Audio CD, DivX/MP3/WMA discs: Track/All/Off
24. CLEAR  Removes a track number on the program menu. 25. TV - Controlling the TV
Your remote control is capable of operating your DVD/CD
Receiver as well as limited functions of LG TV. 
Follow the instructions below to operate your LG TV.
Setting Remote Control Codes for LG TV
1.Hold POWER (TV)and press CHANNEL(v/V) button
repeatedly until the TV on or off.
2..ThePOWER (TV), CHANNEL(v/V), VOLUME (+/-), and
INPUTbuttons on remote control are used to operate the LG TV.
Note:If the remote control does not operate your particular TV,
try the other code or use the remote control originally supplied
with the LG TV. (LG and Gold Star)Due to the variety of codes
used by manufacturers, OUR COMPANY cannot guarantee that
the remote control will operate every LG TV model.DivXDVD
Record AUDIO CD source to USB
One track recording :If the usb recording is played during
playback of the cd, the only track would be recording into the
USB.
All track recording: If the USB Rec. button is pressed at the
CD stop, all track would be recording.
Program list recording: USB Records after selectig the tracks
pressing the PROG./MEMO. button if you want to record the
tracks you want.
 
						

							8
3. Adjust options using v/V/b/Bbuttons.
4. After setting, returns to the previous menu by pressing
RETURN button.
Speaker selectionSelect a speaker that you want to adjust. [Front speaker (Front
L), Front speaker (Front R), Center Speaker (Center), Subwoofer
(SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)]
Note:Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size: Since the speaker settings are fixed, you cannot change
the settings.
Volume: Press b/Bto adjust the output level of the selected
speaker. (-6dB ~ 6dB)
Distance: If you connected speakers to your DVD/CD Receiver,
setting the Distance lets the speakers know how far the sound
has to travel to reach your set listening point. This allows the
sound from each speaker to reach the listener at the same time. 
Press b/Bto adjust the Distance of the selected speaker.
Test : Press b/Bto test the signals of each speaker. Adjust the
volume to match the volume of test signals memorized in the
system.
Front Left (L) →Center →Front Right (R) →Rear Right (R)
→Rear Left (L) →SubWoofer
DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby
Digital only). Set to [On] for this effect.
VocalSet Vocal to [On] only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc will mix into normal
stereo sound.
Semi Karaoke When a chapter/ title / track is fully finished, this function shows
the score in the screen with a fanfare sound.
Semi Karaoke on :
- Turn the “Semi Karaoke” function on.
When you finished singing a score will appear on the
screen.
Semi Karaoke off :
- Turn the “Semi Karaoke” function off. 
Fanfare and score do not appears on the screen
Available discs for the  Semi Karaoke function:
•DVD discs
• DVD Karaoke discs
Note: 
• This function operate on the DVD/CD mode. 
• The Semi Karaoke function is available only when a
microphone is connected.
• When you watching movies, “off ” the Semi Karaoke at the
SETUP menu and enjoy it without connecting the MIC if the
fanfare or score appears during changing a chapter.
• In case the chapter lenghth of disc, is not longer than 1
minute, scoring does not appear on the display window.
LOCK (Parental Control)
Rating:Blocks playback of rated DVDs based on theircontents. Not all discs are rated.
1. Select “Rating” on the LOCK menu then press B.
2. To access the LOCK options, you must input the password
you have created. If you have not yet entered password, you
are prompted to do so.Input a password and press ENTER. Enter it again and press
ENTER to verify. If you make a mistake before pressing
ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v/Vbuttons. 
Rating 1-8: Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
Unlock: If you select unlock, parental control is not active
and the disc plays in full.
4. Press ENTER to confirm your rating selection, then press
SETUP to exit the menu.
Password:You can enter or change password.
1.
Select Password on the LOCK menu and then press B.2. Follow the step 2 as shown above (Rating).
To change the password, press ENTER when the “Change”
option is highlighted. Input a password and press ENTER.
Enter it again and press ENTER to verify.
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the following
steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press 
ENTER. The password is cleared. 
Area Code Enter the code of the area whose standards were used to rate
the DVD video disc, based on the list on page 11.
1. Select “Area Code” on the LOCK menu then 
press B.
2. Follow step 2 as shown in rating section. 
3. Select the first character using v/Vbuttons.
4. Press Band select the second character using 
v/Vbuttons.
5. Press ENTER to confirm your Area code selection.
OTHERSPBC (Playback Control) –Playback control provides
special navigation features that are available on some
disc. Select [On] to use this feature.
DivX(R) VOD Registration
We provide you the DivX®
VOD (Video On Demand) registration
code that allows you to rent and purchase videos based on the
DivX®
VOD service. For more information, visit
www.divx.com/vod.
1. Select “DivX(R) VOD” option and then press B.
2. Press ENTER while “Select” is selected and the registration
code will appear. 
Use the registration code to purchase or rent the videos from
DivX®
VOD service at www.divx.com/vod. Follow the
instructions and download the video onto a disc for playback
on this unit.
3. Press ENTER to exit.
Note: All the downloaded videos from DivX®
VOD can only be
played back on this unit.
REC Bitrate : Set USB record Bitrate to 96kbps or 128kbps (see
page 7)
 
						

							9
ENGLISH
Playing an Audio CD or MP3/WMA file
This unit can play Audio CDs or MP3/WMA files.
MP3/ WMA/ Audio CD
Once you insert a cd with MP3/WMA files or Audio, a menu
appears on the TV screen.
Press v/ Vto select a track/file and then press PLAY or
ENTER, and playback starts. You can use variable playback
functions. Refer to the page 5,6 or 7.
ID3 TAG
When playing a file containing information such as track titles,
you can see the information by pressing DISPLAY.
[  Song,Title, Artist, Album, Year,  Comment  ]
-ID3 Tag will be operate in the MP3 file.
Note: When you select the song of MP3/WMA file this model
can not operate with NUMERICAL key on the remote control.
Tips:
 
Press MENU to move to the next page.
 
On a CD with MP3/WMA and JPEG, you can switch
MP3/WMA and JPEG. Press TITLE, and MUSIC or PHOTO
top of the menu is highlighted.
 
AUTO EQ is set for WMA/ MP3 file in the DVD/CD,USB
function.
Programmed Playback The program function enables you to store your favorite tracks
from any disc in the receiver memory. A program can contain 30
tracks.
1. Insert a disc. Audio CD and MP3/WMA Discs: 
2. Select a track on the “List”, and then press
PROG./MEMO.“ ” icon appears on the display window
and then press ENTER to place the selected track on the
“Program” list. Repeat to place additional tracks on the list.
3. Select the track you want to start playing on the “Program” list.
Press MENU to move to the next page.
4. Press PLAY or ENTER to start. Playback begins in the order
in which you programmed the tracks. Playback stops after all
of the tracks on the “Program” list have played once.
5. To resume normal playback from programmed playback,
select a track of AUDIO CD (or MP3/WMA) list and then
press PLAY.
Repeat Programmed Tracks 
1. Press REPEAT when playing a disc. The repeat icon
appears.2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track.
• ALL: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Erasing a Track from “Program” List 
1. Use vVto select the track that you wish to erase from the
Program list.
2. Press CLEAR. Repeat to erase additional tracks on the list.
Erasing the Complete Program List 
Press PROG./MEMO. andthen, “ ” icon will appear. 
Usev/Vto select  “ Clear All” icon and then press ENTER.
Note:
- The programs are also cleared when the disc is removed.
- During playback,AUTO skip is not supported.
Viewing a JPEG file This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on JPEG
Recordings page 13.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
2. Press v/Vto select a folder, and then press ENTER. A list
of files in the folder appears. If you are in a file list and want
to return to the previous Folder list, use the v/Vbuttons on
the Remote to highlight  and press ENTER.
3. If you want to view a particular file, press v/Vto highlight a
file and press ENTER or PLAY. While viewing a file, you can
press STOP to move to the previous menu (JPEG menu).
Tip:
There are three Slide Speed options  : > (Slow), >>
(Normal), >>> (Fast). Use v/V/b/Bto highlight the Speed.
Then, use b/Bto select the option you want to use and then
press ENTER. 
Slide Show : Use vVbBto highlight the  (Slide Show)
then press ENTER.
Still Picture :
1.Press PAUSE/STEP during the slide show. The DVD/CD
Receiver will now go into the PAUSE mode.
2.To return to the slide show, press PLAY or press PAUSE/STEP
again.
Playing an Audio CD or MP3/WMA/JPEG/ DivX file
You can preset 50 stations for FM and AM (MW). Before tuning,
make sure that you have turned down the volume.
1. Press FUNCTIONon the Remote Control until FM or AM
(MW) appears in the display window.
2. And then every time you press FUNCTION, FM and AM
(MW) changes alternately.
3. Press and hold TUN.(-/+) for about two seconds until the
frequency indication starts to change, then release.
Scanning stops when the DVD/CD Receiver tunes in a 
station.
4. Press PROG./MEMO. on the Remote Control.
A preset number will flash in the display window.
5. Press PRESET +/- on the Remote Control to select the
preset number you want.
6. Press PROG./MEMO. on the Remote Control again.
The station is stored. 7. Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal 
Press TUN.(-/+) repeatedly in step 3 to tune in the station
manually.
To clear all the stored stations 
Press and hold PROG./MEMO. for about two seconds and “
ERASE ALL” appears in the display window and then press
PROG./MEMO. again, the stations are cleared.
 
If you have accidentally entered into the ERASE ALL mode
and you do not wish to clear the memory, do not press any
key. After a few seconds, the ERASE ALL will go off by itself
and change to normal mode.
Note: If all stations have already been entered, the FULL
message will appear in the display window for a moment and
then a preset number will flash. To change the preset number,
follow steps 5-6 as above.
Presetting the Radio Stations
 
						

							10
Listening to the music during slide show :
You can listen to music during slide show, if the disc contain
music and photo files together. Use v/V/b/Bto highlight 
icon then press ENTER to start slide show.
 
You can not adjust sound mode and VIRTUAL sound
[VSM]during the Music PHOTO ALBUM playing.
Moving to another File 
Press SKIP (.or >) once during viewing a picture to
advance to the next or previous file.
Rotating the picture 
Press v/Vduring showing a picture to rotate the picture
clockwise or counter-clockwise.
Playing a DivX Movie file
You can play DivX file in USB device and DivX disc. in the
DVD/CD Receiver 
1. Insert a disc and close the tray. The MOVIE menu appears
on the TV screen.
2. Press v/Vto select a folder and then press ENTER. A list
of files in the folder appears. If you are in a file list and want
to return to the Folder list, use the v/Vbuttons on the
remote to highlight  and press ENTER.
3. If you want to view a particular file, press 
v/Vto highlight a file and press ENTER or PLAY. 
4. Press STOP to exit.
Tips:
 
Press MENU to move to the next page.
 
On a CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE and
MUSIC, PHOTO and MOVIE word on top of the menu is
highlighted.
Notes:
 
Be sure to select “SUBTITLE ON” mode by pressing the
subtitle file every time before playing a DivX file .
 
When the subtile has more than two languages in the file,
original subtile is only available.
 
You can not adjust sound mode and VIRTUAL sound
[VSM]during the DivX file playing.
Notice for displaying the Divx subtitle
If the subtitle does not display properly during playback, press and
hold S-TITLE for about 3 seconds then press S-TITLE to select
another language code until the subtitle is displayed properly
Additional features
Time Search 
To start playing at any chosen time on the disc:
1.Press DISPLAY during playback. 
2.Press v/Vto select the time clock icon and 
“--:--:--” appears.
3.Input the required start time in hours, minutes, and seconds
from left to right. If you enter the wrong numbers, press
CLEAR to remove the numbers you entered. Then input the
correct numbers.
4.Press ENTER to confirm. Playback starts from the selected
time.
Screen Saver The screen saver appears when you leave the
unit in Stop mode for about five minutes.
Last Scene Memory 
This receiver memorizes the last scene from the last disc that is
viewed. The last scene remains in the memory even if you
remove the disc from the receiver or switch off the receiver.
If you load a disc that has the scene memorized, the scene is
automatically recalled.
Note: This receiver does not memorize the scene of a disc if
you switch off the receiver before commencing to play the disc.
System Select
You must select an appropriate system mode for your TV
system. If NO DISC appears in the display window, press and
hold PAUSE/STEPon theremote control for more than 5
seconds to be able to select a system (PAL, NTSC or AUTO).
 
When the selected system is not compatible with the system
of your TV, normal colour picture may not be displayed.
NTSC:Select when DVD/CD Receiver is connected with NTSC-
TV.
PAL:Select when DVD/CD Receiver is connected with PAL-
TV.
AUTO:Select when DVD/CD Receiver is connected with Multi
system TV.
ACDDVD
DivXDVD