LG Lh Cx245 Owners Manual

							Installation and Setup
21
Changing the order of TV Stations
After tuning TV stations into your DVD/VCR Combi
receiveryou may wish to change the order in which
they are stored without having to retune them against! The
instructionsgiven on this page will show you how you
can simply move them into your desired order
.
1. Press i.
The main menu will appear on the TV screen.
Press 1or 2to select the PR SET.
Press OK.
2. Press i.
Press 3or 4to select the programme number
you want to move (for example, PR 03).
Press 2.
3. Press 3or 4to select the programme number
you want to move to (for example, PR 05).
4. Press OK.
The selected programmewill be moved to the
new programme number.
If you wish to move other TV stations repeat stages 1 - 4.
Press ito remove the menus from the TV screen.
Deleting TV Stations
After tuning TV stations into your DVD/VCR Combi
receiveryou may wish to delete a station.
The instructions given on this page will show you how
easily delete any unwanted TV stations.
1. Press i.
The main menu will appear on the TV screen.
Press 1or 2to select the PR SET.
Press OK.
2. Press i.
Press 3or 4to select the programme number
you want to delete. (for example, PR 03)
3. Press 1.
After a short while, the selected station will be
deleted.
4. Press ito remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages 1 - 3.
How to selecting Stored TV stations:
Stored TV stations can be selected in either of two
ways.
Press 3or 4to select different stations that are tuned
into your DVD/VCR Combi receiver.
You may also directly select stations using the
numbered buttonson the remote control.
PR CH MFT STATION
01 00 PR-01
CHANNEL/CABLE : AV    C 02
iP
SET
R
C04  00 PR-03 02C02  00 PR-01
PR-02
C03  00
04
C05  00 PR-04
05C06
 00PR-05
06 C07  00 PR-06
07 C08  00 PR-07
08 C09  00 PR-08 01
OKi
03
P
SET
R
C04  00 PR-03 02C02  00 PR-01
C03  00 PR-02
04C05  00PR-04
05C06
 00 PR-05
06 C07  00 PR-06
07 C08  00 PR-07
PR-08 08 C09  00 01
OKi
03
P
SET
R
C04  00 PR-05 02C02  00 PR-01
C03  00 PR-02
04C05  00PR-03
05C06
 00PR-04
06 C07  00 PR-06
07 C08  00 PR-07
PR-08 08 C09  00 01
03
OKi ,DELETE :MOVE :P
SET
R
PR CH MFT STATION
01 00 PR-01
CHANNEL/CABLE : AV    C 02
iP
SET
R
C04  00 PR-05 02C02  00 PR-01
C03  00 PR-02
04C05  00PR-03
05C06
 00PR-04
06 C07  00 PR-06
07 C08  00 PR-07
PR-08 08 C09  0001
03
OKi ,DELETE :    MOVE : P
SET
R
C04  00 PR-04 02C02  00 PR-01
C03  00 PR-02
04
05C06
 00PR-03
06C07  00 PR-05
07C08  00 PR-06
08C09  00
 00PR-07
PR-08
C10 01
03
OKi ,DELETE :    MOVE:P
SET
R
RECOKi
SYS-Dr.VCRPr-12ACMS12TIME
DATEP
SET
RP
SET
RTEMOSDON
OFFOSDf16:9
4:3OPRNIC
02 C03 00 PR-02
03 C04 00 PR-03
04 C05 00 PR-04
05 C06 00 PR-05
06 C07 00 PR-06
07 C08 00 PR-07
08 C09 00 PR-0801 C02 00 PR-01
OKi , DELETE :MOVE :P
SET
R
RECOKi
SYS-Dr.VCRPr-12ACMS12TIME
DATEP
SET
RP
SET
RTEMOSDON
OFFOSDf16:9
4:3OPRNIC
02 C03 00 PR-02
03 C04 00 PR-03
04 C05 00 PR-04
05 C06 00 PR-05
06 C07 00 PR-06
07 C08 00 PR-07
08 C09 00 PR-0801 C02 00 PR-01
OKi , DELETE :MOVE :P
SET
R
 
						

							22
On-Screen Display
You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
1. Press DISPLAY during playback.
2. Press v/Vto select an item.
The selected item is highlighted.
3. Press b/Bto change the setting. You can also
use the number buttons if appropriate (e.g.
inputting the title number). For some functions,
press ENTER to execute the setting.
Notes:
•Some discs may not provide all of the features
shown below.
•If no button is pressed for 10 seconds, the on-
screen display disappears.
Playback Status/Restrictions
Repeat title
Repeat sequence
Enter a Marker
Marker Search menu
Resume play from this point
Action prohibited or not available
MARKER SEARCH123456789
1 / 9
A - B
TITLEExample: On-Screen Display during 
playing VCDItems
Title Number
Chapter Number
Time search
Audio language 
and Digital Audio 
Output mode
Subtitle language
Angle
Sound
Selection Method
b/ B,Numbers 
ENTER
b/ B,Numbers 
ENTER
Numbers, ENTER
b/ Bor
AUDIO
b/ Bor
S-TITLE
b/ Bor
ANGLE
b/ B
1 / 3
1 / 12
0:20:09
AB
C1 ENG
1 / 3
3D SUR
Example: On-Screen Display during 
playing DVD Video
Items
Track Number
(or PBC mode)
Time search
Audio Channel
Sound
Selection Method
b/ B,Numbers 
ENTER
Numbers 
ENTER
b/ Bor
AUDIO
b/ B
1 / 3
0:20:09
STEREO
3D SUR
Items
Track Number
Time search
Audio language 
and Digital Audio 
Output mode
Subtitle language
Sound
Selection Method
b/ B,Numbers 
ENTER
Numbers, ENTER
b/ Bor
AUDIO
b/ Bor
S-TITLE
b/ B
1 / 3
0:20:09
MP3 1
AB
CENG
3D SUR
Example: On-Screen Display during 
playing divx movie disc
Before Operation-DVD part
 
						

							Installation and Setup
23
Initial Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 23 to 26.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level: 
Press Bon the remote control. 
To go back to the previous level:
Press bon the remote control. 
General Operation
1. Press SETUP. The Setup menu appears.
2. Use v/Vto select the desired option then press
Bto move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3. Use v/Vto select the second desired option then
press Bto move to the third level.
4.
Use v/Vto select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
LANGUAGE
Menu Language
Select a language for the Setup menu and on-screen
display.
Disc Audio / Subtitle / Menu 
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: 
To select another language, press number 
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the 
reference chapter. If you enter the wrong language code,
press CLEAR.
DVD
Menu Language
Original English
Off
Original Disc Audio
Disc Subtitle   
Disc Menu
MoveSelect         
LANGUAGE
 
						

							24
DISPLAY
TV Aspect 
4:3 : 
Select when a standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
LetterBox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: 
Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for con-
nection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn On progressive scan:
Connect component out of this unit to the input of
your monitor/television, set your television or monitor
to Component Input.
1. Select “Progressive Scan” on the DISPLAY menu
then press B.
2. Select “On” using the v/Vbuttons. 
3. Press ENTER to confirm your selection. 
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan on the DVD Player.
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the bbutton
to highlight Enter.5. Pressing ENTER will set this unit to Progressive
scan mode.
Caution:
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan 
compatible TV or monitor. If you set Progressive Scan to
On in error, you must reset the unit.  
1) Remove any disc from the unit and close the disc tray.
See that “NO DISC” is displayed on the display window.
2) Press STOP and hold it for five seconds before releas-
ing it. The video output will be restored to the standard
setting and a picture will once again be visible on a
conventional analog TV or monitor.
TV Output Select
Set this unit TV Output Select options according to the
TV connection type. 
YPbPr: When your TV is connected with the COMPO-
NENT/PROGRESSIVE SCAN VIDEO OUT jacks on
this unit. 
RGB: When your TV is connected with the SCART
(RGB signal) jack.
AUDIO
Each DVD disc has a variety of audio output options.
Set this unit AUDIO options according to the type of
audio system you use. 
5.1 Speaker Setup 
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output. (See “Speaker Settings”, page 39.)
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic 
presentation possible, thanks to digital audio 
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
Vocal
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound. 
DVD
DivXDVD
DVD
DVD
DVD
DISPLAY  
TV Aspect
Widescreen 16  :  9 Wide
Display Mode
Off Progressive Scan
MoveSelect         
TV Output SelectRGB
DISPLAY  
TV Aspect
TV Output Select Display Mode
MoveEnter         Prev.         
On Progressive ScanOff
Select
On 5.1 Speaker Setup
DRC
On Vocal
MoveSelect         
AUDIO
 
						

							Installation and Setup
25
OTHERS
The PBC, Auto Play and DivX(R) VOD settings can be
changed. 
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the
PBC.
Off: Video CDs with PBC are played the same way as
Audio CDs.
Auto Play 
You can set up the DVD Player so a DVD disc auto-
matically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
On:Auto Play function is active.
Off:Auto Play function is not active.
Notes:
The Auto Play function may not work for some DVDs.DivX(R) VOD 
You can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
The Registration code is used for VOD (Video-On-
Demand) service agent. You can purchase or rent an
encrypt move file.
Notes:
If you rent the DivX VOD file, it has several options of
viewing limits as shown below.
•Display the number which you can watch the file.
•The rental has been expired.
•Display the authorization error.
DivX
DVD
VCD
DivX(R) Video On Demand
Your registration code is : XXXXXXXX
      To learn more visit
      www.divx.com/vod
(Done)
View DivX(R) VOD Rental
        This rental has 3 views left.
      Do you want to use one
      of your 3 views now?
(Yes) (No)
Rental Expired
       (Done)
Authorization Error
This player is not authorized 
          to play this video.
(Done)
PBC
Off
Move
Auto Play
OTHERS
On
Select         
Select
DivX(R) VOD
 
						

							26
LOCK (Parental Control)  
Rating  
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the 
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer more suitable scenes as an
alternative. 
The parental control feature allows you to block
access to scenes below the rating you input, there by
preventing your children from being able to view 
material you believe is unsuitable. 
1. Select “Rating” on the LOCK menu then 
press B.
2. To access the Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so. 
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v/Vbuttons. 
Rating 1-8: Rating one (1) has the most restric-
tions and rating eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.Password (Security Code)
You can enter or change password.
1. Select Password on the LOCK menu then press B. 
2. Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
3. Enter the new 4-digit code, then press ENTER.
Input it again to verify.
4. Press SETUP to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using
the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and the security
code is cleared. 
3. Enter a new code as described above.
Country Code 
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the
list in the reference chapter.
1. Select “Country Code” on the LOCK menu then
press B.
2. Follow step 2 as shown left (Rating).
3. Select the first character using v/Vbuttons.
4. Shift the cursor using Bbutton and select the 
second character using v/Vbuttons.
5. Press ENTER to confirm your country code 
selection.
DVD
DVD
LOCK
Rating
New
SE Unlock
Password   
Country Code
MoveSelect         
H U
 
						

							Installation and Setup
27
Playing a Tape
You will only be able to load and eject video cassettes
when your DVD/VCR Combi receiver is plugged into
the mains. Your DVD/VCR Combi receivermay also
playback recordings from NTSC tapes (on PAL TV).
Getting a better picture
When a cassette is inserted and playback started, the
automatic tracking function works to get the best possi-
ble picture automatically. If the quality of the recording is
poor, repeatedly press 3 3 
 
or 4 4
on the remote control or
press PROG. + or - on the front pannal to manually
adjust the tracking until any distortions have been
removed.Press numbered 0on the remote control to
switch automatic tracking back on again.
1. Make sure that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
this book.
Turn on your TV. Press POWERto turn on your
DVD/VCR Combi receiver. Insert the video cassette
into your DVD/VCR Combi receiver. The video cas-
sette should have the window side facing up and
the arrow facing away from you. 
2. Press PLAYto start playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the
cassette will start automatically.
AUTO TRACKING
Your DVD/VCR Combi receiver will automatically
adjust the tracking to give the best picture quality.
3. Press PAUSE/STEPto still a picture.
Press PAUSE/STEPrepeatedly to advance the
tape frame by frame.
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
Tapes can be paused for up to 5 minutes. After 5
minutes your DVD/VCR Combi receiver will stop
the tape to prevent damaging the tape or your
DVD/VCR Combi receiver. Still picture quality can
be improved slightly by pressing 3 3 
 
or 4 4
.
4. Press PLAYto continue playing your tape.
Picture search:
During playing back press either FORWARDor
BACKWARDand this will enable you to rapidly
wind the tape (7 times normal playback) and see
where you are on the tape.
Logic search:
During fast forwarding or rewinding press and hold
FORWARDor BACKWARDthe picture will be
played back at 7 times normal playback speed.
5.Slow motion playback, Shuttle : 
During playing back or still picture press 
F or G.You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
To switch off the slow motion and shuttle, press the
desired function.
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of
tape.
If distortions can be seen in the picture, reduce
them with 
D or E.
6. Press STOPto end playback.
Press EJECT.
If the end of the tape is reached, your DVD/VCR
Combi receiver will stop playback automatically,
rewind, stop, eject the tape.
CM (Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIPon the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIPto skip:
1 Press 30 seconds
2 Press 60 seconds
3 Press 90 seconds
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
OPR (Optimum Picture Response)
This feature automatically improves playback picture
quality by adjusting your DVD/VCR Combi receiver to
the condition of the tape.
1. Press i.
2. Press 1or 2to select OPR.
3. Press OK.
4. Press 3 3 
 
or 4 4
repeatedly to select: OFF, SOFTor
SHARP.
Please note you may only set OPR when
playing a tape.
5. Press ireturn to screen.
Operation
RECiDr.VCRPr-12ACMSP
SET
R12TIME
DATESYS-
TEM
OPROPROSDON
OFFOSDf16:9
4:3NICOFF
SOFT
SHARP
 
						

							28
Instant Timer Recording (ITR)
Your DVD/VCR Combi receiverallows you to make
recordings using a variety of simple methods:
Instant Timer Recording (ITR) start recording immedi-
ately for a set period of time or until the video cassette
runs out.
Your DVD/VCR Combi receiverincorporates Long Play
(LP) which enables you to record up to twice the
amount of time on a video cassette. For example an E-
180 will record up to 180 minutes using Standard Play
(SP); using LP you will be able to record up to 360 min-
utes.Please note there will be a slight loss in picture
and sound quality when using LP.
1. Make sure that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
this book.
Press POWERto turn on your VCR.
2. Insert a video cassette with protection tab into
your DVD/VCR Combi receiver. 
The video cassette should have the window side
facing up and the arrow facing away from you.
3. Press PR vorVto select the programme 
numberyou wish to record.
You may also directly select programme number
using the numbered buttonson the remote 
control.
4. If you wish to record directly from the SCART
sockets repeatedly press AVuntil the socket you
wish to record from is displayed.
AV  1  for recording from EURO AV1 SCART socket
on the rear of your DVD/VCR Combi receiver.
AV  2for recording from EURO AV2 SCART socket
on the rear of your DVD/VCR Combi receiver.
AV  3for recording from VIDEO IN and AUDIO IN 
(Left & Right) sockets on the front of your
DVD/VCR Combi receiver.5. Press SPEEDif you wish to record in Long Play or
Standard Play.
SP will produce improved picture and sound 
quality, however LP will provide twice as much
recording time as SP.
6. Press REC/ITRto start recording.
RECORD will appear on the TV screen. 
Press REC/ITRseveral times. Each successive
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
7.Press PAUSE/STEPto avoid recording unwanted
scenes.
Press PAUSE/STEPto continue recording. 
If you press PAUSE/STEPduring ITR, this
DVD/VCR Combi receiver will enter the record
pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your DVD/VCR Combi receiver will stop
recording to prevent damaging the tape or your
DVD/VCR Combi receiver.
8.Press STOPto end recording.
Press EJECT. 
EJECT will appear on the TV screen for a few
seconds.
Notes:

If you do not wish to record on a tape (this can 
happen quite easily by accident!) remove the 
protection tab on the back edge of the video 
cassette.

It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive tape.

Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCRto appear TVindicator in the display
window and then selecting a different channel on
your TV.
 
						

							Operation
29
ShowViewProgramming
ShowView greatly simplifies entering the date,
channel, start and end times of a Timer
Recording by simply entering a ShowView Code.
ShowView Codes are published in most TV
guide magazines; they can vary one to nine
numbers in length.
S
HOWVIEWis a registered trademark of Gemstar
Development Corporation.
The S
HOWVIEWsystem is manufactured under
licence from Gemstar Development Corporation.
1. Make sure that TV channels have been tuned and
stored in correct SHOWVIEW order. Insert a video
cassette with protection tab into your DVD/VCR
Combi receiver.
2. Press SHOWVIEW.
3. Press 
D orE to select the recording type.
ONCE: To record once. 
WEEKLY: To record at the same time every week.
DAILY: To record every day (except Saturday and
Sunday) at the same time.
4. Press the numbered buttonsto enter the
ShowView Code of the TV programme that you
wish to record.
If you make a mistake press 
Fthen enter the
revised number.
5. Press OK.
If PLEASE CHECK is displayed it means that you
have entered the wrong ShowView number,
entered the ShowView number incorrectly.
If “- -” is displayed, you have to enter the 
programme number of the station, you want to
record from.
6. Press 
For Gto select the settings that you wish to
revise. (PR, DATE, TIME, VPS and SP).
Press 
Dor Eto enter the correct information.7. Press 
Dor Eto switch VPS/PDC on or off.
Press 
G to select the recording speed.
Press 
Dor Eto select the desired tape speed (SP,
IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program. IP mode is not
selected when VPS/PDC is ON. Check that the
timer event details are correct. If you wish to record
from AUDIO IN and VIDEO IN on the front or from
either of the EURO SCART sockets on the back of
DVD/VCR Combi receiver, press AV to select for
correct display (AV1, AV2 or AV3).
8. If you want to make another ShowView recording
repeat stages 2 - 7.Press itwice. 
If PLEASE CHECKis displayed, you have entered
incorrect information and will need to re-enter the
data.
Press POWERto switch your DVD/VCR Combi
receiver power off mode.  will appear in the video
recorder’s display while your DVD/VCR Combi
receiver waits to make the recording.
To watch a DVD during timer recording standby
mode, press POWER and DVD to switch to DVD
mode.
9.Press STOPto end recording.
Notes
•Video Programme System (VPS)
The Video Programme System (VPS) ensures that
the TV programmes that you have programmed for
timer recording will be recorded exactly from their
beginning to end, even if the actual broadcasting
time differs from the scheduled time due to delayed
start, or if the programme is extended beyond its
scheduled time. Also, if a programme is interrupted,
for example, if a news flash is inserted, the record-
ing will also be interrupted automatically and
resumed when the programme continues. 
The VPS signal is broadcast by the TV station and
this controls the timer in the video recorder. 
VPS should be set ON for all timer recordings from
TV stations broadcasting these signals. It should be
set OFF for all timer recordings from TV stations that
are not broadcasting these signals.
ONCEOKi 0~9,
SHOWVIEW NO.
 - - - - - - - - -
REC
ONCEOKi 0~9,
SHOWVIEW NO.
  246876543
REC
PR DATE TIME
 - - - -
SP
 - - - -
SP
 - - - -
SP
 - - - -
SP
 - - - -
SP
 - - - -
SP
- - - -  - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ :: 10 PR-01 12
SP
11 11 55~ ::
i
PR DATE TIME
 - - - -SP
 - - - -SP
 - - - -SP
 - - - -SP
 - - - -SP
 - - - -SP
- - - -  - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ :: 10 PR-01 12SP
11 1155 ~ ::
i
PR DATE TIME
 - - - -
SP
 - - - -
SP
 - - - -
SP
 - - - -
SP
 - - - -
SP
 - - - -
SP
- - - -  - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ :: 10 PR-01
12
SP 11 11 55~ ::
i
 
						

							30
Timer recording using On Screen
Display
You may set up to seven timer record events within one
month of the current date.
Note
Before setting the timer make sure that you have set the
DVD/VCR Combi receiverclock correctly and you
know which stations you have tuned TV stations on
your DVD/VCR Combi receiver.
1. Insert a video cassette with protection tab into your
DVD/VCR Combi receiver. 
The video cassette should have the window side
facing up and the arrow facing away from you.
2. Press i. 
Press 1or 2to select REC.
Press OK.
3. Press OKto start setting the timer record event.
If all timer record events are full press 3 3 
 
or 4 4
to
select the event that you wish to remove and
replace. Press 1to delete the event.
4. Press the numbered buttonsto enter the station
that you wish to record.
When selecting stations 1 - 9, press 0 first, then
the channel number; for example Stations 3 - 03.
You may also select Channels by pressing 3 3 
 
or 4 4
.
Once selected press 2.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets on the back of your unit, press AV to select
for correct display (AV1, AV2 or AV3).
5. Press the numbered buttonsto enter the date of
the programme. If you press OKbefore entering
the date you may select one of the following 
automated recording  features. Press 1or 2to
select, then press OKto confirm.
DLYTo record every day (except Saturday and
Sunday) at the same time.
SU~SATo record at the same time every week.6.
Press the numbered buttonsto enter the recording start
and end times of the programme that you wish to record.
Please note your DVD/VCR Combi receiver uses a
24 hour clock. e.g. 1pm will be displayed as 13:00. 
You may also select the the start and end times by
pressing 3 3 
 
or 4 4
.
7. Press 3 3 
 
or 4 4
to switch VPS on or off.
Press 2to select the recording speed. 
Press 3 3 
 
or 4 4
to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to 
complete recording the program. IP mode is not
selected when VPS is ON.
8.Check that the timer event details are correct.
Press itwice. 
If PLEASE CHECKis displayed, you have entered
incorrect and will need to re-enter the data.
Press POWERto switch your DVD/VCR Combi
receiver Standby.  will appear in the display win-
dow while your DVD/VCR Combi receiver waits to
make the recording. To watch a DVD during timer
recording standby mode, press POWER and DVD
to switch to DVD mode.
9. Press STOPto end recording.
Notes
•
If at a later date you wish to deleteor changeany of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3 3
or 4 4
to select the event that you wish to deleteor
change.
Press 1to delete the event...or
Press OKto change; then press 1or 2to select;
Station, Date, Start and End times and LP. Press 3 3
or 4 4
to enter the correct information.
•If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier 
programme will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at
17:00.
Programme 2 is programmed to start at 16:30 and end  at
17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
PR DATE
T I M E
 - - - -- -
SP
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SP  - -
- - - -  - - - -~ :: - - - -  - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::SP
i
PRDATE
T  I  M  E
 - - - -16
SP
 - - - -
SP
 - - - -
SP
 - - - -
SP
 - - - -
SP
 - - - -
SPPR-01
- - - -  - - - -~ :: 19 00  2000 ~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::SP
i
PR
DATE
T  I  M  E
 - - - -16
SP
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SPPR-01
- - - -  - - - -~ :: 19 00  20 00~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
i
SP
PR DATE
T I M E
 - - - -- -
SP
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SPPR-01
- - - -  - - - -~ :: - - - -  - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::SP
i
PR DATE
T  I  M  E
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SP
 - - - - SPPR-0116
- - - -  - - - -~ :: - - - -  - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::
- - - - - - - -~ ::SP
iOK DLY   SU MO  TU  WE  TH  FR   SA