LG Lh Cx245 Owners Manual

Installation and Setup
11
S
D
E
R
S-VIDEO 
INPUT
AERIAL
Rear of TV
SCART INPUT
A
Decoder (or another VCR)
•Make one of the following connections, depending
on the capabilities of your existing equipment.
Tips
•Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/VCR Combi receiver. Use one of
the connections described below.
•Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections....

12
Progressive Scan (ColorStream®pro) connection
Connect the EURO AV1 AUDIO/VIDEO socket on the
DVD/VCR Combi receiver to the COMPONENT
VIDEO INPUT(Y Pb Pr) jacks on the TV using the
SCART to RCA cable (Optional).

 
If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD/VCR Combi receive
rprogressive scan output
for the highest video resolution possible. 

 
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you...

Installation and Setup
FM Wire aerial (supplied)
AM Loop aerial (supplied)
Radio Aerial Connections
Connect the supplied FM/AM aerial for listening to the radio.
•Connect the AM loop aerial to the AM aerial connector.
•Connect he FM wire aerial to the FM aerial connector.
Notes
•
To prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combireceiverand other components.
•Be sure to fully extend the FM wire aerial.
•After connecting the FM wire aerial, keep it as horizontal as possible....

14
Notes
•
Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are
reversed, the sound will be distorted  and will lack base.
•If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the
speakers.
•Do not remove the front cover of supplied speaker.
Front Speaker
(Right)Front Speaker
(Left)Centre Speaker
Rear Speaker
(Right Surround)Rear Speaker
(Left Surround)Subwoofer
Speaker System...

Installation and Setup
Centre Speaker
Front Speaker
(Left)
Speaker Positioning Example Rear Speaker
(Left)Rear Speaker
(Right) Front Speaker
(Right) Subwoofer
Speaker Positioning
In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and 
subwoofer). 
If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect
a subwoofer.
•Front speakers
According to your listening position set up the speakers for equal...

16
Mini Glossary for Audio Stream
& Surround mode
Allows you to enjoy 5.1(or 6) discrete channels of high 
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark.
DTS Digital Surround delivers up to 6 channels of transpar-
ent audio(which means identical to the original masters) and
results in exceptional clarity throughout a true 360 degree
sound field. The term DTS is a trademark of DTS
Technology, LLC. Manufactured under license from DTS...

Installation and Setup
Before Operation-VCR part
Tuning in a video channel on your TV
Notes
•The output frequency of this video recorder (VCR) is
set at UHF channel 60. If channel 60 is already
used by another TV station, or if the picture is 
distorted, you can change the transmitter channel of
your DVD/VCR Combi receiver. Stages 5 ~ 8 will
show you how to change the output frequency of
your DVD/VCR Combi receiver.
•Your TV receives signals from the video recorder
(VCR) like another TV station. You have...

18
Setting the clock Manually
The clock in your DVD/VCR Combi receiver controls
time and date settings for your DVD/VCR Combi
receiver
.
1. Press i.
Press 1or 2to select TIME DATE.
Press OK.
2. Use the numbered buttonson the remote control
to alter the HOURS, MINUTES, DAY, MONTHand
YEAR.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically
when you enter the year.
3. If you make a mistake  press 1or 2and enter the
correct details....

Installation and Setup
19
How to use the main menu
This DVD/VCR Combi receiver can easily be 
programmed by using the menus displayed on
screen. The menus are controlled from the Remote
Control Handset.
1.Switch on your TV set and DVD/VCR Combi
receiver by pressingthe POWERbutton.
2. Press ibutton.
The main menu will appear on the TV screen.
•REC
Timer recording setting (see p. 30).
•PR SET
Manual tuning setting (see p. 20).
•ACMS 
ACMS (Automatic Channel Memory System) 
(see right column).
•TIME DATE...

Tuning in TV Stations Manually
In certain areas of the country broadcast signals may
be too weak for your DVD/VCR Combi 
receiver automatic tuning process to find or assign TV
stations correctly.
You must tune in these weaker broadcast 
stations manually in order for your DVD/VCR Combi
receiver to store them
.
1. Press i.
The main menu will appear on the TV screen.
Press 1or 2to select the PR SET.
Press OK.
2. Press i.
The station table will appear.
Press 3or 4to select the programme number
that you want...