LG LED LCD TV 32LD550 User Manual

31
PREPARATION
DESKTOP PEDESTAL INSTALLATION
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 º to suit 
your viewing position.
ꔛ Image shown may differ from your TV.
For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)!
?
!
?
CAUTION
► Ensure adequate ventilation by following the clearance recommendations.
► Do not mount near or above...

PREPARATION
PREPARATION
32
ATTACHING THE TV TO A DESK (For 32/42LD550, 32LE5400)
 The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten-
tially causing injury or damaging the product. 
1-Screw
 ( provided as parts of the product)
Desk
Stand
KENSINGTON SECURITY SYSTEM
ꔛ This feature is not available for all models.
-   The TV is equipped with a Kensington Security System con-
nector on the back panel. Connect the Kensington Security 
System cable as shown below.
-...

33
PREPARATION
SECURING THE TV TO THE WALL TO PREVENT FALLING 
WHEN THE TV IS USED ON A STAND
 We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. 
 Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward 
direction, potentially causing injury or damaging the product. 
 Caution: Please make sure that children don’t climb on or hang from the TV. 
ꔛ Insert the eye-bolts (or TV brackets and bolts) to tighten the product to...

PREPARATION
PREPARATION
34
ANTENNA OR CABLE CONNECTION
ꔛ To prevent damage do not connect to the power outlet until all connections are made between the 
devices.
ꔛ Image shown may differ from your TV.
1. Antenna (Analog or Digital)
   Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
 For optimum picture quality, adjust antenna direction if needed.
2. Cable
Wall 
Antenna  
Socket
Outdoor 
Antenna 
(VHF, UHF)
Cable TV 
Wall Jack
Multi-family Dwellings/Apartments
(Connect to wall...

35
EXTERNAL  EQUIPMENT  SETUP
HD RECEIVER SETUP
ꔛ To prevent the equipment damage, never plug in any power cords until you have finished connecting all 
equipment.
ꔛ Image shown may differ from your TV.
1. How to connect
1Connect  the  video  outputs (
Y,  PB,  PR)  of  the 
digital  set-top  box  to  the  COMPONENT  IN 
VIDEO  1,  2,  or 3*  jacks  on  the  TV.  Match  the 
jack colors (Y = green, P
B = blue, and PR = red).
2Connect the audio output of the digital set-top 
box  to  the  COMPONENT  IN...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
36
LRVIDEOAUDIO
YLRPBPR
AUDIO / Y  P
B  PR
IN  4
H/P USB IN 1 USB IN 2AV IN2
VIDEO /  AUDIO
S-VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
LRVIDEO AUDIO
COMPONENT IN3
AUDIO / Y  P
B  PR
IN  4
H/P USB IN 1 USB IN 2
VIDEO / 
AUDIO
COMPONENT IN3
AV IN2
AUDIO /  Y  P
B  PR
IN  4
H/P USB IN 1 USB IN 2
VIDEO / 
AUDIO
COMPONENT IN3
AV IN2
For LED LCD TV
1
2   

37
EXTERNAL  EQUIPMENT  SETUP
HDMI Connection
1. How to connect
1Connect the digital set-top box to HDMI/DVI IN 
1,  2,  3, or  4 jack on the TV.
2No separate audio connection is necessary.
HDMI supports both audio and video.
2. How to use
ꔛ  Turn on the digital set-top box. 
    (
Refer to the owner’s manual for the digital set-
top box. )
 
ꔛ Select the  HDMI1, HDMI2 , HDMI3 , or HDMI4  input 
source on the TV using the  INPUT
 button on the 
remote control.
!
?
!
?
NOTE
► If an HDMI cable doesn’t...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
38
DVI to HDMI Connection
1. How to connect
1Connect  the  DVI  output  of  the  digital  set-top 
box  to  the HDMI/DVI  IN  1, 2, 3,  or 4*  jack  on 
the TV.
2Connect the digital set-top box audio output to 
the AUDIO IN (RGB/DVI) jack on the TV.
2. How to use
ꔛ  Turn on the digital set-top box. 
    (Refer to the owner’s manual for the digital set-
top box.) 
ꔛ  Select the HDMI1, HDMI2, HDMI3, or HDMI4* input 
source on the TV using the INPUT button...

39
EXTERNAL  EQUIPMENT  SETUP
DVD SETUP
Component Input ports
To get better picture quality, connect a DVD player 
to the component input ports as shown below.
1. How to connect
1Connect  the  video  outputs (Y,  PB,  PR)    of  the 
DVD to the COMPONENT IN VIDEO 1, 2, or 3* 
jacks on the TV.
Match the jack colors (Y = green, PB = blue, and 
PR = red).
2Connect the audio outputs of the DVD to the 
COMPONENT IN AUDIO 1, 2, or 3* jacks on the 
TV.
2. How to use
ꔛ Turn on the DVD player, insert a DVD.
ꔛ...

EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
40
Composite (RCA) Connection
1. How to connect
1Connect  the AUDIO/VIDEO  jacks between  TV 
and DVD. Match the jack colors (Video = yellow, 
Audio Left = white, and Audio Right = red)
2. How to use
ꔛ Turn on the DVD player, insert a DVD.
ꔛ Select  the AV1  or AV2  input  source  on  the  TV 
using the INPUT button on the remote control.  
ꔛ Refer  to  the  DVD  player's  manual  for  operating 
instructions.
HDMI OUTPUT
RGB IN (PC)
LA N
WIRELESS...